Production · SOC 51-4121
Welders, Cutters, Solderers, and Brazers
Use hand-welding, flame-cutting, hand-soldering, or brazing equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
Will AI replace this job?
The data cannot say, and anyone who gives you a percentage for “replaced” is guessing. What it does show is a gap between three things, for the 30 tasks O*NET lists for this occupation:
Could an LLM do it?
0%–7%
of tasks: an LLM alone could do the task or cut its time by half. Human raters say 0%, GPT-4 says 7%.
Counting tasks that need extra software around the model: 3%–10%.
Is it happening?
0 of 30 tasks
show measurable use in Claude conversations (Anthropic Economic Index). Anthropic’s occupation score, which counts only tasks that were also rated feasible, is 0%. Observed is a subset of “could” by construction.
Claude only, mostly US users, sampled periods in 2025. Not all AI use, and not employment.
What is left?
26 of 30 tasks
were rated “no LLM speed-up” by every rater (so, by Anthropic’s method, they cannot show up as observed use either). That is the part of the job these studies see no sign of AI touching.
It does not mean those tasks are safe. It means these methods found nothing there.
Task by task
Sorted with the tasks seen in use first. The three coloured squares are the three raters, in this order: human raters, GPT-4, GPT-4 with an alternative rubric. “Usage score” is Anthropic’s published task_penetration value; 0 means none seen.
| Task (O*NET 31.0) | Could an LLM? | Claude usage score |
|---|---|---|
| Develop templates and models for welding projects, using mathematical calculations based on blueprint information. | all raters | none seen |
| Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals. | 1 of 3 raters | none seen |
| Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques. | 1 of 3 raters | none seen |
| Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and operations. (supplemental) | 1 of 3 raters | none seen |
| Operate safety equipment and use safe work habits. | no rater | none seen |
| Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications. | no rater | none seen |
| Weld components in flat, vertical, or overhead positions. | no rater | none seen |
| Detect faulty operation of equipment or defective materials and notify supervisors. | no rater | none seen |
| Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment. | no rater | none seen |
| Mark or tag material with proper job number, piece marks, and other identifying marks as required. | no rater | none seen |
| Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreign matter. | no rater | none seen |
| Align and clamp workpieces together, using rules, squares, or hand tools, or position items in fixtures, jigs, or vises. | no rater | none seen |
| Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained. | no rater | none seen |
| Position and secure workpieces, using hoists, cranes, wire, and banding machines or hand tools. | no rater | none seen |
| Melt and apply solder along adjoining edges of workpieces to solder joints, using soldering irons, gas torches, or electric-ultrasonic equipment. | no rater | none seen |
| Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material. | no rater | none seen |
| Grind, cut, buff, or bend edges of workpieces to be joined to ensure snug fit, using power grinders and hand tools. | no rater | none seen |
| Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys. | no rater | none seen |
| Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment. | no rater | none seen |
| Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools. | no rater | none seen |
| Clean or degrease parts, using wire brushes, portable grinders, or chemical baths. | no rater | none seen |
| Hammer out bulges or bends in metal workpieces. | no rater | none seen |
| Check grooves, angles, or gap allowances, using micrometers, calipers, and precision measuring instruments. (supplemental) | no rater | none seen |
| Melt and apply solder to fill holes, indentations, or seams of fabricated metal products, using soldering equipment. (supplemental) | no rater | none seen |
| Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits. (supplemental) | no rater | none seen |
| Guide and direct flames or electrodes on or across workpieces to straighten, bend, melt, or build up metal. (supplemental) | no rater | none seen |
| Use fire suppression methods in industrial emergencies. (supplemental) | no rater | none seen |
| Preheat workpieces prior to welding or bending, using torches or heating furnaces. (supplemental) | no rater | none seen |
| Set up and use ladders and scaffolding as necessary to complete work. (supplemental) | no rater | none seen |
| Operate metal shaping, straightening, and bending machines, such as brakes and shears. (supplemental) | no rater | none seen |
Try it with your own task list
Sources: task list from O*NET® Database (U.S. Department of Labor, CC BY 4.0; modified by noworkleft.com); “could” labels from Eloundou et al., GPTs are GPTs (OpenAI/University of Pennsylvania, MIT licence, labels from early-2023 models); “seen in use” from the Anthropic Economic Index (Claude usage only, CC BY). Dates, versions and limits.
Other jobs in Production
- Computer Numerically Controlled Tool Programmers (12% observed)
- Prepress Technicians and Workers (10% observed)
- Gas Plant Operators (7% observed)
- Aircraft Structure, Surfaces, Rigging, and Systems Assemblers (5% observed)
- Crushing, Grinding, and Polishing Machine Setters, Operators, and Tenders (4% observed)
- Petroleum Pump System Operators, Refinery Operators, and Gaugers (4% observed)
- Helpers--Production Workers (4% observed)
- Timing Device Assemblers and Adjusters (4% observed)
Data built 2026-11-06. O*NET 31.0. Task match rates: 99.4% with the OpenAI/Penn labels, 99.2% with Anthropic usage.