Production · SOC 51-2011
Aircraft Structure, Surfaces, Rigging, and Systems Assemblers
Assemble, fit, fasten, and install parts of airplanes, space vehicles, or missiles, such as tails, wings, fuselage, bulkheads, stabilizers, landing gear, rigging and control equipment, or heating and ventilating systems.
Will AI replace this job?
The data cannot say, and anyone who gives you a percentage for “replaced” is guessing. What it does show is a gap between three things, for the 26 tasks O*NET lists for this occupation:
Could an LLM do it?
0%
of tasks: an LLM alone could do the task or cut its time by half. Human raters say 0%, GPT-4 says 0%.
Counting tasks that need extra software around the model: 4%–39%.
Is it happening?
1 of 26 tasks
show measurable use in Claude conversations (Anthropic Economic Index). Anthropic’s occupation score, which counts only tasks that were also rated feasible, is 5%. Observed is a subset of “could” by construction.
Claude only, mostly US users, sampled periods in 2025. Not all AI use, and not employment.
What is left?
15 of 26 tasks
were rated “no LLM speed-up” by every rater (so, by Anthropic’s method, they cannot show up as observed use either). That is the part of the job these studies see no sign of AI touching.
It does not mean those tasks are safe. It means these methods found nothing there.
Task by task
Sorted with the tasks seen in use first. The three coloured squares are the three raters, in this order: human raters, GPT-4, GPT-4 with an alternative rubric. “Usage score” is Anthropic’s published task_penetration value; 0 means none seen.
| Task (O*NET 31.0) | Could an LLM? | Claude usage score |
|---|---|---|
| Read blueprints, illustrations, or specifications to determine layouts, sequences of operations, or identities or relationships of parts. | 2 of 3 raters | 0.98 |
| Attach brackets, hinges, or clips to secure or support components or subassemblies, using bolts, screws, rivets, chemical bonding, or welding. | 1 of 3 raters | none seen |
| Assemble prefabricated parts to form subassemblies. | 1 of 3 raters | none seen |
| Clean aircraft structures, parts, or components, using aqueous, semi-aqueous, aliphatic hydrocarbon, or organic solvent cleaning products or techniques to reduce carbon or other harmful emissions. | 1 of 3 raters | none seen |
| Clean, oil, or coat system components, as necessary, before assembly or attachment. | 1 of 3 raters | none seen |
| Position and align subassemblies in jigs or fixtures, using measuring instruments and following blueprint lines and index points. (supplemental) | 1 of 3 raters | none seen |
| Verify dimensions of cable assemblies or positions of fittings, using measuring instruments. (supplemental) | 1 of 3 raters | none seen |
| Place and connect control cables to electronically controlled units, using hand tools, ring locks, cotter keys, threaded connectors, turnbuckles, or related devices. (supplemental) | 1 of 3 raters | none seen |
| Assemble prototypes or integrated-technology demonstrators of new or emerging environmental technologies for aircraft. (supplemental) | 1 of 3 raters | none seen |
| Install mechanical linkages and actuators, using tensiometers to verify tension of cables. (supplemental) | 1 of 3 raters | none seen |
| Swage fittings onto cables, using swaging machines. (supplemental) | 1 of 3 raters | none seen |
| Inspect or test installed units, parts, systems, or assemblies for fit, alignment, performance, defects, or compliance with standards, using measuring instruments or test equipment. | no rater | none seen |
| Assemble parts, fittings, or subassemblies on aircraft, using layout tools, hand tools, power tools, or fasteners, such as bolts, screws, rivets, or clamps. | no rater | none seen |
| Mark identifying information on tubing or cable assemblies, using etching devices, labels, rubber stamps, or other methods. | no rater | none seen |
| Adjust, repair, rework, or replace parts or assemblies to ensure proper operation. | no rater | none seen |
| Align, fit, assemble, connect, or install system components, using jigs, fixtures, measuring instruments, hand tools, or power tools. | no rater | none seen |
| Cut, trim, file, bend, or smooth parts to ensure proper fit and clearance. | no rater | none seen |
| Cut cables and tubing, using master templates, measuring instruments, and cable cutters or saws. | no rater | none seen |
| Set up or operate machines or systems to crimp, cut, bend, form, swage, flare, bead, burr, or straighten tubing, according to specifications. | no rater | none seen |
| Set, align, adjust, or synchronize aircraft armament or rigging or control system components to established tolerances or requirements, using sighting devices and hand tools. (supplemental) | no rater | none seen |
| Join structural assemblies, such as wings, tails, or fuselage. (supplemental) | no rater | none seen |
| Capture or segregate waste material, such as aluminum swarf, machine cutting fluid, or solvents, for recycling or environmentally responsible disposal. (supplemental) | no rater | none seen |
| Layout and mark reference points and locations for installation of parts or components, using jigs, templates, or measuring and marking instruments. (supplemental) | no rater | none seen |
| Fit and fasten sheet metal coverings to surface areas or other sections of aircraft prior to welding or riveting. (supplemental) | no rater | none seen |
| Fabricate parts needed for assembly or installation, using shop machinery or equipment. (supplemental) | no rater | none seen |
| Manually install structural assemblies or signal crane operators to position assemblies for joining. (supplemental) | no rater | none seen |
Try it with your own task list
Sources: task list from O*NET® Database (U.S. Department of Labor, CC BY 4.0; modified by noworkleft.com); “could” labels from Eloundou et al., GPTs are GPTs (OpenAI/University of Pennsylvania, MIT licence, labels from early-2023 models); “seen in use” from the Anthropic Economic Index (Claude usage only, CC BY). Dates, versions and limits.
Other jobs in Production
- Computer Numerically Controlled Tool Programmers (12% observed)
- Prepress Technicians and Workers (10% observed)
- Gas Plant Operators (7% observed)
- Crushing, Grinding, and Polishing Machine Setters, Operators, and Tenders (4% observed)
- Petroleum Pump System Operators, Refinery Operators, and Gaugers (4% observed)
- Helpers--Production Workers (4% observed)
- Timing Device Assemblers and Adjusters (4% observed)
- Tailors, Dressmakers, and Custom Sewers (3% observed)
Data built 2026-11-06. O*NET 31.0. Task match rates: 99.4% with the OpenAI/Penn labels, 99.2% with Anthropic usage.