Production · SOC 51-9197
Tire Builders
Operate machines to build tires.
Will AI replace this job?
The data cannot say, and anyone who gives you a percentage for “replaced” is guessing. What it does show is a gap between three things, for the 20 tasks O*NET lists for this occupation:
Could an LLM do it?
0%
of tasks: an LLM alone could do the task or cut its time by half. Human raters say 0%, GPT-4 says 0%.
Counting tasks that need extra software around the model: 0%–5%.
Is it happening?
0 of 20 tasks
show measurable use in Claude conversations (Anthropic Economic Index). Anthropic’s occupation score, which counts only tasks that were also rated feasible, is 0%. Observed is a subset of “could” by construction.
Claude only, mostly US users, sampled periods in 2025. Not all AI use, and not employment.
What is left?
19 of 20 tasks
were rated “no LLM speed-up” by every rater (so, by Anthropic’s method, they cannot show up as observed use either). That is the part of the job these studies see no sign of AI touching.
It does not mean those tasks are safe. It means these methods found nothing there.
Task by task
Sorted with the tasks seen in use first. The three coloured squares are the three raters, in this order: human raters, GPT-4, GPT-4 with an alternative rubric. “Usage score” is Anthropic’s published task_penetration value; 0 means none seen.
| Task (O*NET 31.0) | Could an LLM? | Claude usage score |
|---|---|---|
| Measure tires to determine mold size requirements. (supplemental) | 1 of 3 raters | none seen |
| Build semi-raw rubber treads onto buffed tire casings to prepare tires for vulcanization in recapping or retreading processes. | no rater | none seen |
| Trim excess rubber and imperfections during retreading processes. | no rater | none seen |
| Fill cuts and holes in tires, using hot rubber. | no rater | none seen |
| Place tires into molds for new tread. (supplemental) | no rater | none seen |
| Fit inner tubes and final layers of rubber onto tires. (supplemental) | no rater | none seen |
| Buff tires according to specifications for width and undertread depth. (supplemental) | no rater | none seen |
| Brush or spray solvents onto plies to ensure adhesion, and repeat process as specified, alternating direction of each ply to strengthen tires. (supplemental) | no rater | none seen |
| Start rollers that bond tread and plies as drums revolve. (supplemental) | no rater | none seen |
| Align treads with guides, start drums to wind treads onto plies, and slice ends. (supplemental) | no rater | none seen |
| Inspect worn tires for faults, cracks, cuts, and nail holes, and to determine if tires are suitable for retreading. (supplemental) | no rater | none seen |
| Roll hand rollers over rebuilt casings, exerting pressure to ensure adhesion between camelbacks and casings. (supplemental) | no rater | none seen |
| Position ply stitcher rollers and drums according to width of stock, using hand tools and gauges. (supplemental) | no rater | none seen |
| Cut plies at splice points, and press ends together to form continuous bands. (supplemental) | no rater | none seen |
| Depress pedals to rotate drums, and wind specified numbers of plies around drums to form tire bodies. (supplemental) | no rater | none seen |
| Clean and paint completed tires. (supplemental) | no rater | none seen |
| Rub cement sticks on drum edges to provide adhesive surfaces for plies. (supplemental) | no rater | none seen |
| Depress pedals to collapse drums after processing is complete. (supplemental) | no rater | none seen |
| Wind chafers and breakers onto plies. (supplemental) | no rater | none seen |
| Pull plies from supply racks, and align plies with edges of drums. (supplemental) | no rater | none seen |
Try it with your own task list
Sources: task list from O*NET® Database (U.S. Department of Labor, CC BY 4.0; modified by noworkleft.com); “could” labels from Eloundou et al., GPTs are GPTs (OpenAI/University of Pennsylvania, MIT licence, labels from early-2023 models); “seen in use” from the Anthropic Economic Index (Claude usage only, CC BY). Dates, versions and limits.
Other jobs in Production
- Computer Numerically Controlled Tool Programmers (12% observed)
- Prepress Technicians and Workers (10% observed)
- Gas Plant Operators (7% observed)
- Aircraft Structure, Surfaces, Rigging, and Systems Assemblers (5% observed)
- Crushing, Grinding, and Polishing Machine Setters, Operators, and Tenders (4% observed)
- Petroleum Pump System Operators, Refinery Operators, and Gaugers (4% observed)
- Helpers--Production Workers (4% observed)
- Timing Device Assemblers and Adjusters (4% observed)
Data built 2026-11-06. O*NET 31.0. Task match rates: 99.4% with the OpenAI/Penn labels, 99.2% with Anthropic usage.