Production · SOC 51-6064
Textile Winding, Twisting, and Drawing Out Machine Setters, Operators, and Tenders
Set up, operate, or tend machines that wind or twist textiles; or draw out and combine sliver, such as wool, hemp, or synthetic fibers. Includes slubber machine and drawing frame operators.
Will AI replace this job?
The data cannot say, and anyone who gives you a percentage for “replaced” is guessing. What it does show is a gap between three things, for the 23 tasks O*NET lists for this occupation:
Could an LLM do it?
0%–9%
of tasks: an LLM alone could do the task or cut its time by half. Human raters say 0%, GPT-4 says 9%.
Counting tasks that need extra software around the model: 4%–13%.
Is it happening?
0 of 23 tasks
show measurable use in Claude conversations (Anthropic Economic Index). Anthropic’s occupation score, which counts only tasks that were also rated feasible, is 0%. Observed is a subset of “could” by construction.
Claude only, mostly US users, sampled periods in 2025. Not all AI use, and not employment.
What is left?
20 of 23 tasks
were rated “no LLM speed-up” by every rater (so, by Anthropic’s method, they cannot show up as observed use either). That is the part of the job these studies see no sign of AI touching.
It does not mean those tasks are safe. It means these methods found nothing there.
Task by task
Sorted with the tasks seen in use first. The three coloured squares are the three raters, in this order: human raters, GPT-4, GPT-4 with an alternative rubric. “Usage score” is Anthropic’s published task_penetration value; 0 means none seen.
| Task (O*NET 31.0) | Could an LLM? | Claude usage score |
|---|---|---|
| Record production data such as numbers and types of bobbins wound. | all raters | none seen |
| Study guides, samples, charts, and specification sheets, or confer with supervisors or engineering staff to determine setup requirements. (supplemental) | 2 of 3 raters | none seen |
| Notify supervisors or mechanics of equipment malfunctions. | 1 of 3 raters | none seen |
| Thread yarn, thread, or fabric through guides, needles, and rollers of machines. | no rater | none seen |
| Start machines, monitor operation, and make adjustments as needed. | no rater | none seen |
| Inspect machinery to determine whether repairs are needed. | no rater | none seen |
| Replace depleted supply packages with full packages. | no rater | none seen |
| Stop machines when specified amount of products has been produced. | no rater | none seen |
| Inspect products to verify that they meet specifications and to determine whether machine adjustment is needed. | no rater | none seen |
| Tend machines that twist together two or more strands of yarn or insert additional twists into single strands of yarn to increase strength, smoothness, or uniformity of yarn. | no rater | none seen |
| Observe operations to detect defects, malfunctions, or supply shortages. | no rater | none seen |
| Operate machines for test runs to verify adjustments and to obtain product samples. | no rater | none seen |
| Observe bobbins as they are winding and cut threads to remove loaded bobbins, using knives. (supplemental) | no rater | none seen |
| Unwind lengths of yarn, thread, or twine from spools and wind onto bobbins. (supplemental) | no rater | none seen |
| Adjust machine settings such as speed or tension to produce products that meet specifications. (supplemental) | no rater | none seen |
| Tend spinning frames that draw out and twist roving or sliver into yarn. (supplemental) | no rater | none seen |
| Remove spindles from machines and bobbins from spindles. (supplemental) | no rater | none seen |
| Install, level, and align machine components such as gears, chains, guides, dies, cutters, or needles to set up machinery for operation. (supplemental) | no rater | none seen |
| Place bobbins on spindles and insert spindles into bobbin-winding machines. (supplemental) | no rater | none seen |
| Tend machines with multiple winding units that wind thread onto shuttle bobbins for use on sewing machines or other kinds of bobbins for sole-stitching, knitting, or weaving machinery. (supplemental) | no rater | none seen |
| Repair or replace worn or defective parts or components, using hand tools. (supplemental) | no rater | none seen |
| Measure bobbins periodically, using gauges, and turn screws to adjust tension if bobbins are not of specified size. (supplemental) | no rater | none seen |
| Clean, oil, and lubricate machines, using air hoses, cleaning solutions, rags, oilcans, and grease guns. (supplemental) | no rater | none seen |
Try it with your own task list
Sources: task list from O*NET® Database (U.S. Department of Labor, CC BY 4.0; modified by noworkleft.com); “could” labels from Eloundou et al., GPTs are GPTs (OpenAI/University of Pennsylvania, MIT licence, labels from early-2023 models); “seen in use” from the Anthropic Economic Index (Claude usage only, CC BY). Dates, versions and limits.
Other jobs in Production
- Computer Numerically Controlled Tool Programmers (12% observed)
- Prepress Technicians and Workers (10% observed)
- Gas Plant Operators (7% observed)
- Aircraft Structure, Surfaces, Rigging, and Systems Assemblers (5% observed)
- Crushing, Grinding, and Polishing Machine Setters, Operators, and Tenders (4% observed)
- Petroleum Pump System Operators, Refinery Operators, and Gaugers (4% observed)
- Helpers--Production Workers (4% observed)
- Timing Device Assemblers and Adjusters (4% observed)
Data built 2026-11-06. O*NET 31.0. Task match rates: 99.4% with the OpenAI/Penn labels, 99.2% with Anthropic usage.