Production · SOC 51-2041
Structural Metal Fabricators and Fitters
Fabricate, position, align, and fit parts of structural metal products.
Will AI replace this job?
The data cannot say, and anyone who gives you a percentage for “replaced” is guessing. What it does show is a gap between three things, for the 23 tasks O*NET lists for this occupation:
Could an LLM do it?
0%
of tasks: an LLM alone could do the task or cut its time by half. Human raters say 0%, GPT-4 says 0%.
Counting tasks that need extra software around the model: 0%–4%.
Is it happening?
0 of 23 tasks
show measurable use in Claude conversations (Anthropic Economic Index). Anthropic’s occupation score, which counts only tasks that were also rated feasible, is 0%. Observed is a subset of “could” by construction.
Claude only, mostly US users, sampled periods in 2025. Not all AI use, and not employment.
What is left?
21 of 23 tasks
were rated “no LLM speed-up” by every rater (so, by Anthropic’s method, they cannot show up as observed use either). That is the part of the job these studies see no sign of AI touching.
It does not mean those tasks are safe. It means these methods found nothing there.
Task by task
Sorted with the tasks seen in use first. The three coloured squares are the three raters, in this order: human raters, GPT-4, GPT-4 with an alternative rubric. “Usage score” is Anthropic’s published task_penetration value; 0 means none seen.
| Task (O*NET 31.0) | Could an LLM? | Claude usage score |
|---|---|---|
| Study engineering drawings and blueprints to determine materials requirements and task sequences. | 1 of 3 raters | none seen |
| Design and construct templates and fixtures, using hand tools. (supplemental) | 1 of 3 raters | none seen |
| Verify conformance of workpieces to specifications, using squares, rulers, and measuring tapes. | no rater | none seen |
| Position, align, fit, and weld parts to form complete units or subunits, following blueprints and layout specifications, and using jigs, welding torches, and hand tools. | no rater | none seen |
| Lay out and examine metal stock or workpieces to be processed to ensure that specifications are met. | no rater | none seen |
| Tack-weld fitted parts together. | no rater | none seen |
| Move parts into position, manually or with hoists or cranes. | no rater | none seen |
| Set up and operate fabricating machines, such as brakes, rolls, shears, flame cutters, grinders, and drill presses, to bend, cut, form, punch, drill, or otherwise form and assemble metal components. | no rater | none seen |
| Position or tighten braces, jacks, clamps, ropes, or bolt straps, or bolt parts in position for welding or riveting. | no rater | none seen |
| Lift or move materials and finished products, using large cranes. | no rater | none seen |
| Set up face blocks, jigs, and fixtures. | no rater | none seen |
| Align and fit parts according to specifications, using jacks, turnbuckles, wedges, drift pins, pry bars, and hammers. | no rater | none seen |
| Hammer, chip, and grind workpieces to cut, bend, and straighten metal. | no rater | none seen |
| Locate and mark workpiece bending and cutting lines, allowing for stock thickness, machine and welding shrinkage, and other component specifications. | no rater | none seen |
| Remove high spots and cut bevels, using hand files, portable grinders, and cutting torches. | no rater | none seen |
| Smooth workpiece edges and fix taps, tubes, and valves. | no rater | none seen |
| Mark reference points onto floors or face blocks and transpose them to workpieces, using measuring devices, squares, chalk, and soapstone. (supplemental) | no rater | none seen |
| Direct welders to build up low spots or short pieces with weld. (supplemental) | no rater | none seen |
| Heat-treat parts, using acetylene torches. (supplemental) | no rater | none seen |
| Straighten warped or bent parts, using sledges, hand torches, straightening presses, or bulldozers. (supplemental) | no rater | none seen |
| Erect ladders and scaffolding to fit together large assemblies. (supplemental) | no rater | none seen |
| Preheat workpieces to make them malleable, using hand torches or furnaces. (supplemental) | no rater | none seen |
| Install boilers, containers, and other structures. (supplemental) | no rater | none seen |
Try it with your own task list
Sources: task list from O*NET® Database (U.S. Department of Labor, CC BY 4.0; modified by noworkleft.com); “could” labels from Eloundou et al., GPTs are GPTs (OpenAI/University of Pennsylvania, MIT licence, labels from early-2023 models); “seen in use” from the Anthropic Economic Index (Claude usage only, CC BY). Dates, versions and limits.
Other jobs in Production
- Computer Numerically Controlled Tool Programmers (12% observed)
- Prepress Technicians and Workers (10% observed)
- Gas Plant Operators (7% observed)
- Aircraft Structure, Surfaces, Rigging, and Systems Assemblers (5% observed)
- Crushing, Grinding, and Polishing Machine Setters, Operators, and Tenders (4% observed)
- Petroleum Pump System Operators, Refinery Operators, and Gaugers (4% observed)
- Helpers--Production Workers (4% observed)
- Timing Device Assemblers and Adjusters (4% observed)
Data built 2026-11-06. O*NET 31.0. Task match rates: 99.4% with the OpenAI/Penn labels, 99.2% with Anthropic usage.