Production · SOC 51-8021
Stationary Engineers and Boiler Operators
Operate or maintain stationary engines, boilers, or other mechanical equipment to provide utilities for buildings or industrial processes. Operate equipment such as steam engines, generators, motors, turbines, and steam boilers.
Will AI replace this job?
The data cannot say, and anyone who gives you a percentage for “replaced” is guessing. What it does show is a gap between three things, for the 25 tasks O*NET lists for this occupation:
Could an LLM do it?
0%–12%
of tasks: an LLM alone could do the task or cut its time by half. Human raters say 0%, GPT-4 says 12%.
Counting tasks that need extra software around the model: 12%–20%.
Is it happening?
0 of 25 tasks
show measurable use in Claude conversations (Anthropic Economic Index). Anthropic’s occupation score, which counts only tasks that were also rated feasible, is 0%. Observed is a subset of “could” by construction.
Claude only, mostly US users, sampled periods in 2025. Not all AI use, and not employment.
What is left?
18 of 25 tasks
were rated “no LLM speed-up” by every rater (so, by Anthropic’s method, they cannot show up as observed use either). That is the part of the job these studies see no sign of AI touching.
It does not mean those tasks are safe. It means these methods found nothing there.
Task by task
Sorted with the tasks seen in use first. The three coloured squares are the three raters, in this order: human raters, GPT-4, GPT-4 with an alternative rubric. “Usage score” is Anthropic’s published task_penetration value; 0 means none seen.
| Task (O*NET 31.0) | Could an LLM? | Claude usage score |
|---|---|---|
| Maintain daily logs of operation, maintenance, and safety activities, including test results, instrument readings, and details of equipment malfunctions and maintenance work. | all raters | none seen |
| Develop operation, safety, and maintenance procedures or assist in their development. | all raters | none seen |
| Contact equipment manufacturers or appropriate specialists when necessary to resolve equipment problems. | 2 of 3 raters | none seen |
| Analyze problems and take appropriate action to ensure continuous and reliable operation of equipment and systems. | 1 of 3 raters | none seen |
| Weigh, measure, and record fuel used. | 1 of 3 raters | none seen |
| Receive instructions from steam engineers regarding steam plant and air compressor operations. | 1 of 3 raters | none seen |
| Investigate and report on accidents. (supplemental) | 1 of 3 raters | none seen |
| Operate or tend stationary engines, boilers, and auxiliary equipment, such as pumps, compressors, or air-conditioning equipment, to supply and maintain steam or heat for buildings, marine vessels, or pneumatic tools. | no rater | none seen |
| Activate valves to maintain required amounts of water in boilers, to adjust supplies of combustion air, and to control the flow of fuel into burners. | no rater | none seen |
| Monitor boiler water, chemical, and fuel levels, and make adjustments to maintain required levels. | no rater | none seen |
| Observe and interpret readings on gauges, meters, and charts registering various aspects of boiler operation to ensure that boilers are operating properly. | no rater | none seen |
| Test boiler water quality or arrange for testing and take necessary corrective action, such as adding chemicals to prevent corrosion and harmful deposits. | no rater | none seen |
| Monitor and inspect equipment, computer terminals, switches, valves, gauges, alarms, safety devices, and meters to detect leaks or malfunctions and to ensure that equipment is operating efficiently and safely. | no rater | none seen |
| Switch from automatic to manual controls and isolate equipment mechanically and electrically to allow for safe inspection and repair work. | no rater | none seen |
| Perform or arrange for repairs, such as complete overhauls, replacement of defective valves, gaskets, or bearings, or fabrication of new parts. | no rater | none seen |
| Adjust controls and/or valves on equipment to provide power, and to regulate and set operations of system or industrial processes. | no rater | none seen |
| Clean and lubricate boilers and auxiliary equipment and make minor adjustments as needed, using hand tools. | no rater | none seen |
| Test electrical systems to determine voltages, using voltage meters. | no rater | none seen |
| Install burners and auxiliary equipment, using hand tools. | no rater | none seen |
| Check the air quality of ventilation systems and make adjustments to ensure compliance with mandated safety codes. | no rater | none seen |
| Provide assistance to plumbers in repairing or replacing water, sewer, or waste lines, and in daily maintenance activities. | no rater | none seen |
| Fire coal furnaces by hand or with stokers and gas- or oil-fed boilers, using automatic gas feeds or oil pumps. (supplemental) | no rater | none seen |
| Supervise the work of assistant stationary engineers, turbine operators, boiler tenders, or air conditioning and refrigeration operators and mechanics. (supplemental) | no rater | none seen |
| Operate mechanical hoppers and provide assistance in their adjustment and repair. (supplemental) | no rater | none seen |
| Ignite fuel in burners, using torches or flames. (supplemental) | no rater | none seen |
Try it with your own task list
Sources: task list from O*NET® Database (U.S. Department of Labor, CC BY 4.0; modified by noworkleft.com); “could” labels from Eloundou et al., GPTs are GPTs (OpenAI/University of Pennsylvania, MIT licence, labels from early-2023 models); “seen in use” from the Anthropic Economic Index (Claude usage only, CC BY). Dates, versions and limits.
Other jobs in Production
- Computer Numerically Controlled Tool Programmers (12% observed)
- Prepress Technicians and Workers (10% observed)
- Gas Plant Operators (7% observed)
- Aircraft Structure, Surfaces, Rigging, and Systems Assemblers (5% observed)
- Crushing, Grinding, and Polishing Machine Setters, Operators, and Tenders (4% observed)
- Petroleum Pump System Operators, Refinery Operators, and Gaugers (4% observed)
- Helpers--Production Workers (4% observed)
- Timing Device Assemblers and Adjusters (4% observed)
Data built 2026-11-06. O*NET 31.0. Task match rates: 99.4% with the OpenAI/Penn labels, 99.2% with Anthropic usage.