Home › Jobs › Separating, Filtering, Clarifying, Precipitating, and Still Machine Setters, Operators, and Tenders
Production · SOC 51-9012
Separating, Filtering, Clarifying, Precipitating, and Still Machine Setters, Operators, and Tenders
Set up, operate, or tend continuous flow or vat-type equipment; filter presses; shaker screens; centrifuges; condenser tubes; precipitating, fermenting, or evaporating tanks; scrubbing towers; or batch stills. These machines extract, sort, or separate liquids, gases, or solids from other materials to recover a refined product. Includes dairy processing equipment operators.
Will AI replace this job?
The data cannot say, and anyone who gives you a percentage for “replaced” is guessing. What it does show is a gap between three things, for the 20 tasks O*NET lists for this occupation:
Could an LLM do it?
0%–10%
of tasks: an LLM alone could do the task or cut its time by half. Human raters say 0%, GPT-4 says 10%.
Counting tasks that need extra software around the model: 10%–15%.
Is it happening?
0 of 20 tasks
show measurable use in Claude conversations (Anthropic Economic Index). Anthropic’s occupation score, which counts only tasks that were also rated feasible, is 0%. Observed is a subset of “could” by construction.
Claude only, mostly US users, sampled periods in 2025. Not all AI use, and not employment.
What is left?
17 of 20 tasks
were rated “no LLM speed-up” by every rater (so, by Anthropic’s method, they cannot show up as observed use either). That is the part of the job these studies see no sign of AI touching.
It does not mean those tasks are safe. It means these methods found nothing there.
Task by task
Sorted with the tasks seen in use first. The three coloured squares are the three raters, in this order: human raters, GPT-4, GPT-4 with an alternative rubric. “Usage score” is Anthropic’s published task_penetration value; 0 means none seen.
| Task (O*NET 31.0) | Could an LLM? | Claude usage score |
|---|---|---|
| Maintain logs of instrument readings, test results, or shift production for entry in computer databases. | all raters | none seen |
| Communicate processing instructions to other workers. | all raters | none seen |
| Examine samples to verify qualities such as clarity, cleanliness, consistency, dryness, or texture. | 2 of 3 raters | none seen |
| Monitor material flow or instruments, such as temperature or pressure gauges, indicators, or meters, to ensure optimal processing conditions. | no rater | none seen |
| Inspect machines or equipment for hazards, operating efficiency, malfunctions, wear, or leaks. | no rater | none seen |
| Set up or adjust machine controls to regulate conditions such as material flow, temperature, or pressure. | no rater | none seen |
| Collect samples of materials or products for laboratory analysis. | no rater | none seen |
| Operate machines to process materials in compliance with applicable safety, energy, or environmental regulations. | no rater | none seen |
| Test samples to determine viscosity, acidity, specific gravity, or degree of concentration, using test equipment such as viscometers, pH meters, or hydrometers. | no rater | none seen |
| Clean or sterilize tanks, screens, inflow pipes, production areas, or equipment, using hoses, brushes, scrapers, or chemical solutions. | no rater | none seen |
| Measure or weigh materials to be refined, mixed, transferred, stored, or otherwise processed. | no rater | none seen |
| Dump, pour, or load specified amounts of refined or unrefined materials into equipment or containers for further processing or storage. | no rater | none seen |
| Assemble fittings, valves, bowls, plates, disks, impeller shafts, or other parts to prepare equipment for operation. | no rater | none seen |
| Turn valves to pump sterilizing solutions or rinse water through pipes or equipment or to spray vats with atomizers. | no rater | none seen |
| Turn valves or move controls to admit, drain, separate, filter, clarify, mix, or transfer materials. | no rater | none seen |
| Remove clogs, defects, or impurities from machines, tanks, conveyors, screens, or other processing equipment. | no rater | none seen |
| Start agitators, shakers, conveyors, pumps, or centrifuge machines. | no rater | none seen |
| Install, maintain, or repair hoses, pumps, filters, or screens to maintain processing equipment, using hand tools. | no rater | none seen |
| Connect pipes between vats and processing equipment. | no rater | none seen |
| Remove full containers from discharge outlets and replace them with empty containers. (supplemental) | no rater | none seen |
Try it with your own task list
Sources: task list from O*NET® Database (U.S. Department of Labor, CC BY 4.0; modified by noworkleft.com); “could” labels from Eloundou et al., GPTs are GPTs (OpenAI/University of Pennsylvania, MIT licence, labels from early-2023 models); “seen in use” from the Anthropic Economic Index (Claude usage only, CC BY). Dates, versions and limits.
Other jobs in Production
- Computer Numerically Controlled Tool Programmers (12% observed)
- Prepress Technicians and Workers (10% observed)
- Gas Plant Operators (7% observed)
- Aircraft Structure, Surfaces, Rigging, and Systems Assemblers (5% observed)
- Crushing, Grinding, and Polishing Machine Setters, Operators, and Tenders (4% observed)
- Petroleum Pump System Operators, Refinery Operators, and Gaugers (4% observed)
- Helpers--Production Workers (4% observed)
- Timing Device Assemblers and Adjusters (4% observed)
Data built 2026-11-06. O*NET 31.0. Task match rates: 99.4% with the OpenAI/Penn labels, 99.2% with Anthropic usage.