Production · SOC 51-9141
Semiconductor Processing Technicians
Perform any or all of the following functions in the manufacture of electronic semiconductors: load semiconductor material into furnace; saw formed ingots into segments; load individual segment into crystal growing chamber and monitor controls; locate crystal axis in ingot using x-ray equipment and saw ingots into wafers; and clean, polish, and load wafers into series of special purpose furnaces, chemical baths, and equipment used to form circuitry and change conductive properties.
Will AI replace this job?
The data cannot say, and anyone who gives you a percentage for “replaced” is guessing. What it does show is a gap between three things, for the 17 tasks O*NET lists for this occupation:
Could an LLM do it?
6%–24%
of tasks: an LLM alone could do the task or cut its time by half. Human raters say 6%, GPT-4 says 24%.
Counting tasks that need extra software around the model: 12%–35%.
Is it happening?
0 of 17 tasks
show measurable use in Claude conversations (Anthropic Economic Index). Anthropic’s occupation score, which counts only tasks that were also rated feasible, is 0%. Observed is a subset of “could” by construction.
Claude only, mostly US users, sampled periods in 2025. Not all AI use, and not employment.
What is left?
11 of 17 tasks
were rated “no LLM speed-up” by every rater (so, by Anthropic’s method, they cannot show up as observed use either). That is the part of the job these studies see no sign of AI touching.
It does not mean those tasks are safe. It means these methods found nothing there.
Task by task
Sorted with the tasks seen in use first. The three coloured squares are the three raters, in this order: human raters, GPT-4, GPT-4 with an alternative rubric. “Usage score” is Anthropic’s published task_penetration value; 0 means none seen.
| Task (O*NET 31.0) | Could an LLM? | Claude usage score |
|---|---|---|
| Maintain processing, production, and inspection information and reports. | all raters | none seen |
| Calculate etching time based on thickness of material to be removed from wafers or crystals. (supplemental) | all raters | none seen |
| Monitor operation and adjust controls of processing machines and equipment to produce compositions with specific electronic properties, using computer terminals. (supplemental) | 2 of 3 raters | none seen |
| Inspect materials, components, or products for surface defects and measure circuitry, using electronic test equipment, precision measuring instruments, microscope, and standard procedures. | 1 of 3 raters | none seen |
| Study work orders, instructions, formulas, and processing charts to determine specifications and sequence of operations. | 1 of 3 raters | none seen |
| Count, sort, and weigh processed items. (supplemental) | 1 of 3 raters | none seen |
| Clean semiconductor wafers using cleaning equipment, such as chemical baths, automatic wafer cleaners, or blow-off wands. | no rater | none seen |
| Place semiconductor wafers in processing containers or equipment holders, using vacuum wand or tweezers. | no rater | none seen |
| Load and unload equipment chambers and transport finished product to storage or to area for further processing. | no rater | none seen |
| Manipulate valves, switches, and buttons, or key commands into control panels to start semiconductor processing cycles. | no rater | none seen |
| Inspect equipment for leaks, diagnose malfunctions, and request repairs. | no rater | none seen |
| Stamp, etch, or scribe identifying information on finished component according to specifications. (supplemental) | no rater | none seen |
| Clean and maintain equipment, including replacing etching and rinsing solutions and cleaning bath containers and work area. (supplemental) | no rater | none seen |
| Load semiconductor material into furnace. (supplemental) | no rater | none seen |
| Scribe or separate wafers into dice. (supplemental) | no rater | none seen |
| Etch, lap, polish, or grind wafers or ingots to form circuitry and change conductive properties, using etching, lapping, polishing, or grinding equipment. (supplemental) | no rater | none seen |
| Align photo mask pattern on photoresist layer, expose pattern to ultraviolet light, and develop pattern, using specialized equipment. (supplemental) | no rater | none seen |
Try it with your own task list
Sources: task list from O*NET® Database (U.S. Department of Labor, CC BY 4.0; modified by noworkleft.com); “could” labels from Eloundou et al., GPTs are GPTs (OpenAI/University of Pennsylvania, MIT licence, labels from early-2023 models); “seen in use” from the Anthropic Economic Index (Claude usage only, CC BY). Dates, versions and limits.
Other jobs in Production
- Computer Numerically Controlled Tool Programmers (12% observed)
- Prepress Technicians and Workers (10% observed)
- Gas Plant Operators (7% observed)
- Aircraft Structure, Surfaces, Rigging, and Systems Assemblers (5% observed)
- Crushing, Grinding, and Polishing Machine Setters, Operators, and Tenders (4% observed)
- Petroleum Pump System Operators, Refinery Operators, and Gaugers (4% observed)
- Helpers--Production Workers (4% observed)
- Timing Device Assemblers and Adjusters (4% observed)
Data built 2026-11-06. O*NET 31.0. Task match rates: 99.4% with the OpenAI/Penn labels, 99.2% with Anthropic usage.