Production · SOC 51-7041
Sawing Machine Setters, Operators, and Tenders, Wood
Set up, operate, or tend wood sawing machines. May operate computer numerically controlled (CNC) equipment. Includes lead sawyers.
Will AI replace this job?
The data cannot say, and anyone who gives you a percentage for “replaced” is guessing. What it does show is a gap between three things, for the 22 tasks O*NET lists for this occupation:
Could an LLM do it?
0%
of tasks: an LLM alone could do the task or cut its time by half. Human raters say 0%, GPT-4 says 0%.
Counting tasks that need extra software around the model: 0%–14%.
Is it happening?
0 of 22 tasks
show measurable use in Claude conversations (Anthropic Economic Index). Anthropic’s occupation score, which counts only tasks that were also rated feasible, is 0%. Observed is a subset of “could” by construction.
Claude only, mostly US users, sampled periods in 2025. Not all AI use, and not employment.
What is left?
18 of 22 tasks
were rated “no LLM speed-up” by every rater (so, by Anthropic’s method, they cannot show up as observed use either). That is the part of the job these studies see no sign of AI touching.
It does not mean those tasks are safe. It means these methods found nothing there.
Task by task
Sorted with the tasks seen in use first. The three coloured squares are the three raters, in this order: human raters, GPT-4, GPT-4 with an alternative rubric. “Usage score” is Anthropic’s published task_penetration value; 0 means none seen.
| Task (O*NET 31.0) | Could an LLM? | Claude usage score |
|---|---|---|
| Inspect stock for imperfections or to estimate grades or qualities of stock or workpieces. | 1 of 3 raters | none seen |
| Examine logs or lumber to plan the best cuts. (supplemental) | 1 of 3 raters | none seen |
| Examine blueprints, drawings, work orders, or patterns to determine equipment set-up or selection details, procedures to be used, or dimensions of final products. (supplemental) | 1 of 3 raters | none seen |
| Select saw blades, types or grades of stock, or cutting procedures to be used, according to work orders or supervisors' instructions. (supplemental) | 1 of 3 raters | none seen |
| Inspect and measure workpieces to mark for cuts and to verify the accuracy of cuts, using rulers, squares, or caliper rules. | no rater | none seen |
| Adjust saw blades, using wrenches and rulers, or by turning handwheels or pressing pedals, levers, or panel buttons. | no rater | none seen |
| Mount and bolt sawing blades or attachments to machine shafts. | no rater | none seen |
| Set up, operate, or tend saws or machines that cut or trim wood to specified dimensions, such as circular saws, band saws, multiple-blade sawing machines, scroll saws, ripsaws, or crozer machines. | no rater | none seen |
| Monitor sawing machines, adjusting speed and tension and clearing jams to ensure proper operation. | no rater | none seen |
| Sharpen blades, or replace defective or worn blades or bands, using hand tools. | no rater | none seen |
| Guide workpieces against saws, saw over workpieces by hand, or operate automatic feeding devices to guide cuts. | no rater | none seen |
| Clear machine jams, using hand tools. | no rater | none seen |
| Lubricate or clean machines, using wrenches, grease guns, or solvents. | no rater | none seen |
| Adjust bolts, clamps, stops, guides, or table angles or heights, using hand tools. (supplemental) | no rater | none seen |
| Trim lumber to straighten rough edges or remove defects, using circular saws. (supplemental) | no rater | none seen |
| Count, sort, or stack finished workpieces. (supplemental) | no rater | none seen |
| Position and clamp stock on tables, conveyors, or carriages, using hoists, guides, stops, dogs, wedges, or wrenches. (supplemental) | no rater | none seen |
| Measure and mark stock for cuts. (supplemental) | no rater | none seen |
| Operate panelboards of saw or conveyor systems to move stock through processes or to cut stock to specified dimensions. (supplemental) | no rater | none seen |
| Cut grooves, bevels, or miters, saw curved or irregular designs, and sever or shape metals, according to specifications or work orders. (supplemental) | no rater | none seen |
| Unclamp and remove finished workpieces from tables. (supplemental) | no rater | none seen |
| Dispose of waste material after completing work assignments. (supplemental) | no rater | none seen |
Try it with your own task list
Sources: task list from O*NET® Database (U.S. Department of Labor, CC BY 4.0; modified by noworkleft.com); “could” labels from Eloundou et al., GPTs are GPTs (OpenAI/University of Pennsylvania, MIT licence, labels from early-2023 models); “seen in use” from the Anthropic Economic Index (Claude usage only, CC BY). Dates, versions and limits.
Other jobs in Production
- Computer Numerically Controlled Tool Programmers (12% observed)
- Prepress Technicians and Workers (10% observed)
- Gas Plant Operators (7% observed)
- Aircraft Structure, Surfaces, Rigging, and Systems Assemblers (5% observed)
- Crushing, Grinding, and Polishing Machine Setters, Operators, and Tenders (4% observed)
- Petroleum Pump System Operators, Refinery Operators, and Gaugers (4% observed)
- Helpers--Production Workers (4% observed)
- Timing Device Assemblers and Adjusters (4% observed)
Data built 2026-11-06. O*NET 31.0. Task match rates: 99.4% with the OpenAI/Penn labels, 99.2% with Anthropic usage.