Production · SOC 51-4023
Rolling Machine Setters, Operators, and Tenders, Metal and Plastic
Set up, operate, or tend machines to roll steel or plastic forming bends, beads, knurls, rolls, or plate, or to flatten, temper, or reduce gauge of material.
Will AI replace this job?
The data cannot say, and anyone who gives you a percentage for “replaced” is guessing. What it does show is a gap between three things, for the 19 tasks O*NET lists for this occupation:
Could an LLM do it?
0%–11%
of tasks: an LLM alone could do the task or cut its time by half. Human raters say 0%, GPT-4 says 11%.
Counting tasks that need extra software around the model: 11%–21%.
Is it happening?
0 of 19 tasks
show measurable use in Claude conversations (Anthropic Economic Index). Anthropic’s occupation score, which counts only tasks that were also rated feasible, is 0%. Observed is a subset of “could” by construction.
Claude only, mostly US users, sampled periods in 2025. Not all AI use, and not employment.
What is left?
13 of 19 tasks
were rated “no LLM speed-up” by every rater (so, by Anthropic’s method, they cannot show up as observed use either). That is the part of the job these studies see no sign of AI touching.
It does not mean those tasks are safe. It means these methods found nothing there.
Task by task
Sorted with the tasks seen in use first. The three coloured squares are the three raters, in this order: human raters, GPT-4, GPT-4 with an alternative rubric. “Usage score” is Anthropic’s published task_penetration value; 0 means none seen.
| Task (O*NET 31.0) | Could an LLM? | Claude usage score |
|---|---|---|
| Record mill production on schedule sheets. | all raters | none seen |
| Read rolling orders, blueprints, and mill schedules to determine setup specifications, work sequences, product dimensions, and installation procedures. | 2 of 3 raters | none seen |
| Examine, inspect, and measure raw materials and finished products to verify conformance to specifications. | 1 of 3 raters | none seen |
| Calculate draft space and roll speed for each mill stand to plan rolling sequences and specified dimensions and tempers. | 1 of 3 raters | none seen |
| Signal and assist other workers to remove and position equipment, fill hoppers, and feed materials into machines. | 1 of 3 raters | none seen |
| Select rolls, dies, roll stands, and chucks from data charts to form specified contours and to fabricate products. (supplemental) | 1 of 3 raters | none seen |
| Monitor machine cycles and mill operation to detect jamming and to ensure that products conform to specifications. | no rater | none seen |
| Adjust and correct machine set-ups to reduce thicknesses, reshape products, and eliminate product defects. | no rater | none seen |
| Start operation of rolling and milling machines to flatten, temper, form, and reduce sheet metal sections and to produce steel strips. | no rater | none seen |
| Manipulate controls and observe dial indicators to monitor, adjust, and regulate speeds of machine mechanisms. | no rater | none seen |
| Set distance points between rolls, guides, meters, and stops, according to specifications. | no rater | none seen |
| Install equipment such as guides, guards, gears, cooling equipment, and rolls, using hand tools. | no rater | none seen |
| Position, align, and secure arbors, spindles, coils, mandrels, dies, and slitting knives. | no rater | none seen |
| Fill oil cups, adjust valves, and observe gauges to control flow of metal coolants and lubricants onto workpieces. | no rater | none seen |
| Activate shears and grinders to trim workpieces. | no rater | none seen |
| Direct and train other workers to change rolls, operate mill equipment, remove coils and cobbles, and band and load material. | no rater | none seen |
| Thread or feed sheets or rods through rolling mechanisms, or start and control mechanisms that automatically feed steel into rollers. (supplemental) | no rater | none seen |
| Remove scratches and polish roll surfaces, using polishing stones and electric buffers. (supplemental) | no rater | none seen |
| Disassemble sizing mills removed from rolling lines, and sort and store parts. (supplemental) | no rater | none seen |
Try it with your own task list
Sources: task list from O*NET® Database (U.S. Department of Labor, CC BY 4.0; modified by noworkleft.com); “could” labels from Eloundou et al., GPTs are GPTs (OpenAI/University of Pennsylvania, MIT licence, labels from early-2023 models); “seen in use” from the Anthropic Economic Index (Claude usage only, CC BY). Dates, versions and limits.
Other jobs in Production
- Computer Numerically Controlled Tool Programmers (12% observed)
- Prepress Technicians and Workers (10% observed)
- Gas Plant Operators (7% observed)
- Aircraft Structure, Surfaces, Rigging, and Systems Assemblers (5% observed)
- Crushing, Grinding, and Polishing Machine Setters, Operators, and Tenders (4% observed)
- Petroleum Pump System Operators, Refinery Operators, and Gaugers (4% observed)
- Helpers--Production Workers (4% observed)
- Timing Device Assemblers and Adjusters (4% observed)
Data built 2026-11-06. O*NET 31.0. Task match rates: 99.4% with the OpenAI/Penn labels, 99.2% with Anthropic usage.