Production · SOC 51-4193
Plating Machine Setters, Operators, and Tenders, Metal and Plastic
Set up, operate, or tend plating machines to coat metal or plastic products with chromium, zinc, copper, cadmium, nickel, or other metal to protect or decorate surfaces. Typically, the product being coated is immersed in molten metal or an electrolytic solution.
Will AI replace this job?
The data cannot say, and anyone who gives you a percentage for “replaced” is guessing. What it does show is a gap between three things, for the 33 tasks O*NET lists for this occupation:
Could an LLM do it?
0%–6%
of tasks: an LLM alone could do the task or cut its time by half. Human raters say 0%, GPT-4 says 6%.
Counting tasks that need extra software around the model: 3%–12%.
Is it happening?
0 of 33 tasks
show measurable use in Claude conversations (Anthropic Economic Index). Anthropic’s occupation score, which counts only tasks that were also rated feasible, is 0%. Observed is a subset of “could” by construction.
Claude only, mostly US users, sampled periods in 2025. Not all AI use, and not employment.
What is left?
28 of 33 tasks
were rated “no LLM speed-up” by every rater (so, by Anthropic’s method, they cannot show up as observed use either). That is the part of the job these studies see no sign of AI touching.
It does not mean those tasks are safe. It means these methods found nothing there.
Task by task
Sorted with the tasks seen in use first. The three coloured squares are the three raters, in this order: human raters, GPT-4, GPT-4 with an alternative rubric. “Usage score” is Anthropic’s published task_penetration value; 0 means none seen.
| Task (O*NET 31.0) | Could an LLM? | Claude usage score |
|---|---|---|
| Maintain production records. | all raters | none seen |
| Read production schedules to determine setups of equipment and machines. (supplemental) | 2 of 3 raters | none seen |
| Inspect coated or plated areas for defects, such as air bubbles or uneven coverage. | 1 of 3 raters | none seen |
| Examine completed objects to determine thicknesses of metal deposits, or measure thicknesses by using instruments such as micrometers. | 1 of 3 raters | none seen |
| Determine sizes and compositions of objects to be plated, and amounts of electrical current and time required. (supplemental) | 1 of 3 raters | none seen |
| Immerse workpieces in coating solutions or liquid metal or plastic for specified times. | no rater | none seen |
| Adjust dials to regulate flow of current and voltage supplied to terminals to control plating processes. | no rater | none seen |
| Set up, operate, or tend plating or coating machines to coat metal or plastic products with chromium, zinc, copper, cadmium, nickel, or other metal to protect or decorate surfaces. | no rater | none seen |
| Observe gauges to ensure that machines are operating properly, making adjustments or stopping machines when problems occur. | no rater | none seen |
| Remove objects from solutions at periodic intervals and observe objects to verify conformance to specifications. | no rater | none seen |
| Remove excess materials or impurities from objects, using air hoses or grinding machines. | no rater | none seen |
| Rinse coated objects in cleansing liquids and dry them with cloths, centrifugal driers, or by tumbling in sawdust-filled barrels. | no rater | none seen |
| Test machinery to ensure that it is operating properly. (supplemental) | no rater | none seen |
| Measure or weigh materials, using rulers, calculators, and scales. (supplemental) | no rater | none seen |
| Measure, mark, and mask areas to be excluded from plating. (supplemental) | no rater | none seen |
| Immerse objects to be coated or plated into cleaning solutions, or spray objects with conductive solutions to prepare them for plating. (supplemental) | no rater | none seen |
| Suspend objects, such as parts or molds from cathode rods, or negative terminals, and immerse objects in plating solutions. (supplemental) | no rater | none seen |
| Suspend sticks or pieces of plating metal from anodes, or positive terminals, and immerse metal in plating solutions. (supplemental) | no rater | none seen |
| Adjust controls to set temperatures of coating substances and speeds of machines and equipment. (supplemental) | no rater | none seen |
| Monitor and measure thicknesses of electroplating on component parts to verify conformance to specifications, using micrometers. (supplemental) | no rater | none seen |
| Operate hoists to place workpieces onto machine feed carriages or spindles. (supplemental) | no rater | none seen |
| Position and feed materials into processing machines, by hand or by using automated equipment. (supplemental) | no rater | none seen |
| Position objects to be plated in frames, or suspend them from positive or negative terminals of power supplies. (supplemental) | no rater | none seen |
| Operate sandblasting equipment to roughen and clean surfaces of workpieces. (supplemental) | no rater | none seen |
| Clean and maintain equipment, using water hoses and scrapers. (supplemental) | no rater | none seen |
| Clean workpieces, using wire brushes. (supplemental) | no rater | none seen |
| Mix and test solutions, and turn valves to fill tanks with solutions. (supplemental) | no rater | none seen |
| Replace worn parts and adjust equipment components, using hand tools. (supplemental) | no rater | none seen |
| Place plated or coated materials on racks and transfer them to ovens to dry for specified periods of time. (supplemental) | no rater | none seen |
| Measure and set stops, rolls, brushes, and guides on automatic feeders and conveying equipment or coating machines, using micrometers, rules, and hand tools. (supplemental) | no rater | none seen |
Show the other 3 tasks
| Position containers to receive parts, and load or unload materials in containers, using dollies or handtrucks. (supplemental) | no rater | none seen |
| Perform equipment maintenance, such as cleaning tanks and lubricating moving parts of conveyors. (supplemental) | no rater | none seen |
| Preheat workpieces in ovens. (supplemental) | no rater | none seen |
Try it with your own task list
Sources: task list from O*NET® Database (U.S. Department of Labor, CC BY 4.0; modified by noworkleft.com); “could” labels from Eloundou et al., GPTs are GPTs (OpenAI/University of Pennsylvania, MIT licence, labels from early-2023 models); “seen in use” from the Anthropic Economic Index (Claude usage only, CC BY). Dates, versions and limits.
Other jobs in Production
- Computer Numerically Controlled Tool Programmers (12% observed)
- Prepress Technicians and Workers (10% observed)
- Gas Plant Operators (7% observed)
- Aircraft Structure, Surfaces, Rigging, and Systems Assemblers (5% observed)
- Crushing, Grinding, and Polishing Machine Setters, Operators, and Tenders (4% observed)
- Petroleum Pump System Operators, Refinery Operators, and Gaugers (4% observed)
- Helpers--Production Workers (4% observed)
- Timing Device Assemblers and Adjusters (4% observed)
Data built 2026-11-06. O*NET 31.0. Task match rates: 99.4% with the OpenAI/Penn labels, 99.2% with Anthropic usage.