Production · SOC 51-4081
Multiple Machine Tool Setters, Operators, and Tenders, Metal and Plastic
Set up, operate, or tend more than one type of cutting or forming machine tool or robot.
Will AI replace this job?
The data cannot say, and anyone who gives you a percentage for “replaced” is guessing. What it does show is a gap between three things, for the 21 tasks O*NET lists for this occupation:
Could an LLM do it?
10%
of tasks: an LLM alone could do the task or cut its time by half. Human raters say 10%, GPT-4 says 10%.
Counting tasks that need extra software around the model: 10%–19%.
Is it happening?
0 of 21 tasks
show measurable use in Claude conversations (Anthropic Economic Index). Anthropic’s occupation score, which counts only tasks that were also rated feasible, is 0%. Observed is a subset of “could” by construction.
Claude only, mostly US users, sampled periods in 2025. Not all AI use, and not employment.
What is left?
16 of 21 tasks
were rated “no LLM speed-up” by every rater (so, by Anthropic’s method, they cannot show up as observed use either). That is the part of the job these studies see no sign of AI touching.
It does not mean those tasks are safe. It means these methods found nothing there.
Task by task
Sorted with the tasks seen in use first. The three coloured squares are the three raters, in this order: human raters, GPT-4, GPT-4 with an alternative rubric. “Usage score” is Anthropic’s published task_penetration value; 0 means none seen.
| Task (O*NET 31.0) | Could an LLM? | Claude usage score |
|---|---|---|
| Compute data, such as gear dimensions or machine settings, applying knowledge of shop mathematics. | all raters | none seen |
| Write programs for computer numerical control (CNC) machines to cut metal and plastic materials. (supplemental) | all raters | none seen |
| Read blueprints or job orders to determine product specifications and tooling instructions and to plan operational sequences. | 1 of 3 raters | none seen |
| Select the proper coolants and lubricants and start their flow. | 1 of 3 raters | none seen |
| Record operational data, such as pressure readings, lengths of strokes, feed rates, or speeds. | 1 of 3 raters | none seen |
| Inspect workpieces for defects, and measure workpieces to determine accuracy of machine operation, using rules, templates, or other measuring instruments. | no rater | none seen |
| Position, adjust, and secure stock material or workpieces against stops, on arbors, or in chucks, fixtures, or automatic feeding mechanisms, manually or using hoists. | no rater | none seen |
| Select, install, and adjust alignment of drills, cutters, dies, guides, and holding devices, using templates, measuring instruments, and hand tools. | no rater | none seen |
| Observe machine operation to detect workpiece defects or machine malfunctions, adjusting machines as necessary. | no rater | none seen |
| Set up and operate machines, such as lathes, cutters, shears, borers, millers, grinders, presses, drills, or auxiliary machines, to make metallic and plastic workpieces. | no rater | none seen |
| Change worn machine accessories, such as cutting tools or brushes, using hand tools. | no rater | none seen |
| Set machine stops or guides to specified lengths as indicated by scales, rules, or templates. | no rater | none seen |
| Remove burrs, sharp edges, rust, or scale from workpieces, using files, hand grinders, wire brushes, or power tools. | no rater | none seen |
| Perform minor machine maintenance, such as oiling or cleaning machines, dies, or workpieces, or adding coolant to machine reservoirs. | no rater | none seen |
| Make minor electrical and mechanical repairs and adjustments to machines and notify supervisors when major service is required. | no rater | none seen |
| Start machines and turn handwheels or valves to engage feeding, cooling, and lubricating mechanisms. | no rater | none seen |
| Move controls or mount gears, cams, or templates in machines to set feed rates and cutting speeds, depths, and angles. | no rater | none seen |
| Instruct other workers in machine set-up and operation. | no rater | none seen |
| Extract or lift jammed pieces from machines, using fingers, wire hooks, or lift bars. | no rater | none seen |
| Measure and mark reference points and cutting lines on workpieces, using traced templates, compasses, and rules. (supplemental) | no rater | none seen |
| Align layout marks with dies or blades. (supplemental) | no rater | none seen |
Try it with your own task list
Sources: task list from O*NET® Database (U.S. Department of Labor, CC BY 4.0; modified by noworkleft.com); “could” labels from Eloundou et al., GPTs are GPTs (OpenAI/University of Pennsylvania, MIT licence, labels from early-2023 models); “seen in use” from the Anthropic Economic Index (Claude usage only, CC BY). Dates, versions and limits.
Other jobs in Production
- Computer Numerically Controlled Tool Programmers (12% observed)
- Prepress Technicians and Workers (10% observed)
- Gas Plant Operators (7% observed)
- Aircraft Structure, Surfaces, Rigging, and Systems Assemblers (5% observed)
- Crushing, Grinding, and Polishing Machine Setters, Operators, and Tenders (4% observed)
- Petroleum Pump System Operators, Refinery Operators, and Gaugers (4% observed)
- Helpers--Production Workers (4% observed)
- Timing Device Assemblers and Adjusters (4% observed)
Data built 2026-11-06. O*NET 31.0. Task match rates: 99.4% with the OpenAI/Penn labels, 99.2% with Anthropic usage.