Production · SOC 51-9195
Molders, Shapers, and Casters, Except Metal and Plastic
Mold, shape, form, cast, or carve products such as food products, figurines, tile, pipes, and candles consisting of clay, glass, plaster, concrete, stone, or combinations of materials.
Will AI replace this job?
The data cannot say, and anyone who gives you a percentage for “replaced” is guessing. What it does show is a gap between three things, for the 80 tasks O*NET lists for this occupation:
Could an LLM do it?
0%–1%
of tasks: an LLM alone could do the task or cut its time by half. Human raters say 0%, GPT-4 says 1%.
Counting tasks that need extra software around the model: 4%–10%.
Is it happening?
0 of 80 tasks
show measurable use in Claude conversations (Anthropic Economic Index). Anthropic’s occupation score, which counts only tasks that were also rated feasible, is 0%. Observed is a subset of “could” by construction.
Claude only, mostly US users, sampled periods in 2025. Not all AI use, and not employment.
What is left?
68 of 80 tasks
were rated “no LLM speed-up” by every rater (so, by Anthropic’s method, they cannot show up as observed use either). That is the part of the job these studies see no sign of AI touching.
It does not mean those tasks are safe. It means these methods found nothing there.
Task by task
Sorted with the tasks seen in use first. The three coloured squares are the three raters, in this order: human raters, GPT-4, GPT-4 with an alternative rubric. “Usage score” is Anthropic’s published task_penetration value; 0 means none seen.
| Task (O*NET 31.0) | Could an LLM? | Claude usage score |
|---|---|---|
| Record manufacturing information, such as quantities, sizes, or types of goods produced. | all raters | none seen |
| Develop sketches of glass products into blueprint specifications, applying knowledge of glass technology and glass blowing. | 2 of 3 raters | none seen |
| Prepare work for sale or exhibition, and maintain relationships with retail, pottery, art, and resource networks that can facilitate sale or exhibition of work. | 2 of 3 raters | none seen |
| Design spaces to display pottery for sale. | 2 of 3 raters | none seen |
| Design clay forms and molds, and decorations for forms. (supplemental) | 2 of 3 raters | none seen |
| Lay out designs or dimensions from sketches or blueprints on stone surfaces, freehand or by transferring them from tracing paper, using scribes or chalk and measuring instruments. | 1 of 3 raters | none seen |
| Select chisels, pneumatic or surfacing tools, or sandblasting nozzles, and determine sequence of use. | 1 of 3 raters | none seen |
| Determine types and quantities of glass required to fabricate products. | 1 of 3 raters | none seen |
| Design and create glass objects, using blowpipes and artisans' hand tools and equipment. | 1 of 3 raters | none seen |
| Examine finished ware for defects and measure dimensions, using rule and thickness gauge. | 1 of 3 raters | none seen |
| Select sizes and types of molds according to instructions. (supplemental) | 1 of 3 raters | none seen |
| Study artistic objects or graphic materials, such as models, sketches, or blueprints, to plan carving or cutting techniques. (supplemental) | 1 of 3 raters | none seen |
| Read work orders or examine parts to determine parts or sections of products to be produced. | no rater | none seen |
| Trim or remove excess material, using scrapers, knives, or band saws. | no rater | none seen |
| Shape, trim, or touch up roughed-out designs with appropriate tools to finish carvings. | no rater | none seen |
| Verify depths and dimensions of cuts or carvings to ensure adherence to specifications, blueprints, or models, using measuring instruments. | no rater | none seen |
| Move fingers over surfaces of carvings to ensure smoothness of finish. | no rater | none seen |
| Drill holes and cut or carve moldings and grooves in stone, according to diagrams and patterns. | no rater | none seen |
| Remove or add stencils during blasting to create differing cut depths, intricate designs, or rough, pitted finishes. | no rater | none seen |
| Guide nozzles over stone, following stencil outlines, or chip along marks to create designs or to work surfaces down to specified finishes. | no rater | none seen |
| Carve designs or figures in full or bas relief on stone, employing knowledge of stone carving techniques and sense of artistry to produce carvings consistent with designers' plans. | no rater | none seen |
| Heat glass to pliable stage, using gas flames or ovens and rotating glass to heat it uniformly. | no rater | none seen |
| Shape, bend, or join sections of glass, using paddles, pressing and flattening hand tools, or cork. | no rater | none seen |
| Blow tubing into specified shapes to prevent glass from collapsing, using compressed air or own breath, or blow and rotate gathers in molds or on boards to obtain final shapes. | no rater | none seen |
| Cut lengths of tubing to specified sizes, using files or cutting wheels. | no rater | none seen |
| Inspect, weigh, and measure products to verify conformance to specifications, using instruments such as micrometers, calipers, magnifiers, or rulers. | no rater | none seen |
| Operate and maintain finishing machines to grind, drill, sand, bevel, decorate, wash, or polish glass or glass products. | no rater | none seen |
| Operate electric kilns that heat and mold glass sheets to the shape and curve of metal jigs. | no rater | none seen |
| Place electrodes in tube ends and heat them with glass burners to fuse them into place. | no rater | none seen |
| Operate gas or electric kilns to fire pottery pieces. | no rater | none seen |
Show the other 50 tasks
| Mix and apply glazes to pottery pieces, using tools, such as spray guns. | no rater | none seen |
| Raise and shape clay into wares, such as vases and pitchers, on revolving wheels, using hands, fingers, and thumbs. | no rater | none seen |
| Adjust wheel speeds according to the feel of the clay as pieces enlarge and walls become thinner. | no rater | none seen |
| Position balls of clay in centers of potters' wheels, and start motors or pump treadles with feet to revolve wheels. | no rater | none seen |
| Move pieces from wheels so that they can dry. | no rater | none seen |
| Attach handles to pottery pieces. | no rater | none seen |
| Press thumbs into centers of revolving clay to form hollows, and press on the inside and outside of emerging clay cylinders with hands and fingers, gradually raising and shaping clay to desired forms and sizes. | no rater | none seen |
| Pack and ship pottery to stores or galleries for retail sale. | no rater | none seen |
| Smooth surfaces of finished pieces, using rubber scrapers and wet sponges. | no rater | none seen |
| Pull wires through bases of articles and wheels to separate finished pieces. | no rater | none seen |
| Verify accuracy of shapes and sizes of objects, using calipers and templates. | no rater | none seen |
| Maintain supplies of tools, equipment, and materials, and order additional supplies as needed. | no rater | none seen |
| Operate pug mills to blend and extrude clay. | no rater | none seen |
| Perform test-fires of pottery to determine how to achieve specific colors and textures. | no rater | none seen |
| Brush or spray mold surfaces with parting agents or insert paper into molds to ensure smoothness and prevent sticking or seepage. (supplemental) | no rater | none seen |
| Engrave or stamp identifying symbols, letters, or numbers on products. (supplemental) | no rater | none seen |
| Assemble, insert, and adjust wires, tubes, cores, fittings, rods, or patterns into molds, using hand tools and depth gauges. (supplemental) | no rater | none seen |
| Clean, finish, and lubricate molds and mold parts. (supplemental) | no rater | none seen |
| Separate models or patterns from molds and examine products for accuracy. (supplemental) | no rater | none seen |
| Set the proper operating temperature for each casting. (supplemental) | no rater | none seen |
| Load or stack filled molds in ovens, dryers, or curing boxes, or on storage racks or carts. (supplemental) | no rater | none seen |
| Align and assemble parts to produce completed products, using gauges and hand tools. (supplemental) | no rater | none seen |
| Operate and adjust controls of heating equipment to melt material or to cure, dry, or bake filled molds. (supplemental) | no rater | none seen |
| Patch broken edges or fractures, using clay or plaster. (supplemental) | no rater | none seen |
| Withdraw cores or other loose mold members after castings solidify. (supplemental) | no rater | none seen |
| Repair mold defects, such as cracks or broken edges, using patterns, mold boxes, or hand tools. (supplemental) | no rater | none seen |
| Measure and cut products to specified dimensions, using measuring and cutting instruments. (supplemental) | no rater | none seen |
| Smooth surfaces of molds, using scraping tools or sandpaper. (supplemental) | no rater | none seen |
| Measure ingredients and mix molding, casting material, or sealing compounds to prescribed consistencies, according to formulas. (supplemental) | no rater | none seen |
| Remove excess materials and level and smooth wet mold mixtures. (supplemental) | no rater | none seen |
| Verify dimensions of products, using measuring instruments, such as calipers, vernier gauges, or protractors. (supplemental) | no rater | none seen |
| Bore holes or cut grates, risers, or pouring spouts in molds, using power tools. (supplemental) | no rater | none seen |
| Tap or tilt molds to ensure uniform distribution of materials. (supplemental) | no rater | none seen |
| Construct or form molds for use in casting clay or plaster objects, using plaster, fiberglass, rubber, casting machines, patterns, or flasks. (supplemental) | no rater | none seen |
| Pour, pack, spread, or press plaster, concrete, or other materials into or around models or molds. (supplemental) | no rater | none seen |
| Load sandblasting equipment with abrasives, attach nozzles to hoses, and turn valves to admit compressed air and activate jets. (supplemental) | no rater | none seen |
| Carve rough designs freehand or by chipping along marks on stone, using mallets and chisels or pneumatic tools. (supplemental) | no rater | none seen |
| Cut, shape, and finish rough blocks of building or monumental stone, according to diagrams or patterns. (supplemental) | no rater | none seen |
| Smooth surfaces of carvings, using rubbing stones. (supplemental) | no rater | none seen |
| Strike necks of finished articles to separate articles from blowpipes. (supplemental) | no rater | none seen |
| Place rubber hoses on ends of tubing and charge tubing with gas. (supplemental) | no rater | none seen |
| Place glass into dies or molds of presses and control presses to form products, such as glassware components or optical blanks. (supplemental) | no rater | none seen |
| Repair broken scrolls by replacing them with new sections of tubing. (supplemental) | no rater | none seen |
| Spray or swab molds with oil solutions to prevent adhesion of glass. (supplemental) | no rater | none seen |
| Superimpose bent tubing on asbestos patterns to ensure accuracy. (supplemental) | no rater | none seen |
| Set up and adjust machine press stroke lengths and pressures and regulate oven temperatures, according to glass types to be processed. (supplemental) | no rater | none seen |
| Start machine units and conveyors and observe lights and gauges on panel board to verify operational efficiency. (supplemental) | no rater | none seen |
| Operate drying chambers to dry or finish molded ceramic ware. (supplemental) | no rater | none seen |
| Adjust pressures, temperatures, and trimming tool settings as required. (supplemental) | no rater | none seen |
| Teach pottery classes. (supplemental) | no rater | none seen |
Try it with your own task list
Sources: task list from O*NET® Database (U.S. Department of Labor, CC BY 4.0; modified by noworkleft.com); “could” labels from Eloundou et al., GPTs are GPTs (OpenAI/University of Pennsylvania, MIT licence, labels from early-2023 models); “seen in use” from the Anthropic Economic Index (Claude usage only, CC BY). Dates, versions and limits.
Other jobs in Production
- Computer Numerically Controlled Tool Programmers (12% observed)
- Prepress Technicians and Workers (10% observed)
- Gas Plant Operators (7% observed)
- Aircraft Structure, Surfaces, Rigging, and Systems Assemblers (5% observed)
- Crushing, Grinding, and Polishing Machine Setters, Operators, and Tenders (4% observed)
- Petroleum Pump System Operators, Refinery Operators, and Gaugers (4% observed)
- Helpers--Production Workers (4% observed)
- Timing Device Assemblers and Adjusters (4% observed)
Data built 2026-11-06. O*NET 31.0. Task match rates: 99.4% with the OpenAI/Penn labels, 99.2% with Anthropic usage.