Installation, Maintenance, and Repair · SOC 49-9044
Millwrights
Install, dismantle, or move machinery and heavy equipment according to layout plans, blueprints, or other drawings.
Will AI replace this job?
The data cannot say, and anyone who gives you a percentage for “replaced” is guessing. What it does show is a gap between three things, for the 23 tasks O*NET lists for this occupation:
Could an LLM do it?
0%
of tasks: an LLM alone could do the task or cut its time by half. Human raters say 0%, GPT-4 says 0%.
Counting tasks that need extra software around the model: 0%–9%.
Is it happening?
0 of 23 tasks
show measurable use in Claude conversations (Anthropic Economic Index). Anthropic’s occupation score, which counts only tasks that were also rated feasible, is 0%. Observed is a subset of “could” by construction.
Claude only, mostly US users, sampled periods in 2025. Not all AI use, and not employment.
What is left?
21 of 23 tasks
were rated “no LLM speed-up” by every rater (so, by Anthropic’s method, they cannot show up as observed use either). That is the part of the job these studies see no sign of AI touching.
It does not mean those tasks are safe. It means these methods found nothing there.
Task by task
Sorted with the tasks seen in use first. The three coloured squares are the three raters, in this order: human raters, GPT-4, GPT-4 with an alternative rubric. “Usage score” is Anthropic’s published task_penetration value; 0 means none seen.
| Task (O*NET 31.0) | Could an LLM? | Claude usage score |
|---|---|---|
| Install robot and modify its program, using teach pendant. (supplemental) | 2 of 3 raters | none seen |
| Troubleshoot equipment, electrical components, hydraulics, or other mechanical systems. | 1 of 3 raters | none seen |
| Replace defective parts of machine, or adjust clearances and alignment of moving parts. | no rater | none seen |
| Align machines or equipment, using hoists, jacks, hand tools, squares, rules, micrometers, lasers, or plumb bobs. | no rater | none seen |
| Insert shims, adjust tension on nuts and bolts, or position parts, using hand tools and measuring instruments, to set specified clearances between moving and stationary parts. | no rater | none seen |
| Signal crane operator to lower basic assembly units to bedplate, and align unit to centerline. | no rater | none seen |
| Conduct preventative maintenance and repair, and lubricate machines and equipment. | no rater | none seen |
| Assemble and install equipment, using hand tools and power tools. | no rater | none seen |
| Assemble machines, and bolt, weld, rivet, or otherwise fasten them to foundation or other structures, using hand tools and power tools. | no rater | none seen |
| Move machinery and equipment, using hoists, dollies, rollers, and trucks. | no rater | none seen |
| Level bedplate and establish centerline, using straightedge, levels, and transit. | no rater | none seen |
| Dismantle machines, using hammers, wrenches, crowbars, and other hand tools. | no rater | none seen |
| Bolt parts, such as side and deck plates, jaw plates, and journals, to basic assembly unit. | no rater | none seen |
| Lay out mounting holes, using measuring instruments, and drill holes with power drill. | no rater | none seen |
| Attach moving parts and subassemblies to basic assembly unit, using hand tools and power tools. | no rater | none seen |
| Weld, repair, and fabricate equipment or machinery. | no rater | none seen |
| Shrink-fit bushings, sleeves, rings, liners, gears, and wheels to specified items, using portable gas heating equipment. | no rater | none seen |
| Dismantle machinery and equipment for shipment to installation site, performing installation and maintenance work as part of team. | no rater | none seen |
| Connect power unit to machines or steam piping to equipment, and test unit to evaluate its mechanical operation. | no rater | none seen |
| Position steel beams to support bedplates of machines and equipment, using blueprints and schematic drawings to determine work procedures. | no rater | none seen |
| Fabricate and dismantle parts, equipment, and machines, using a cutting torch or other cutting equipment. | no rater | none seen |
| Construct foundation for machines, using hand tools and building materials such as wood, cement, and steel. | no rater | none seen |
| Operate engine lathe to grind, file, and turn machine parts to dimensional specifications. | no rater | none seen |
Try it with your own task list
Sources: task list from O*NET® Database (U.S. Department of Labor, CC BY 4.0; modified by noworkleft.com); “could” labels from Eloundou et al., GPTs are GPTs (OpenAI/University of Pennsylvania, MIT licence, labels from early-2023 models); “seen in use” from the Anthropic Economic Index (Claude usage only, CC BY). Dates, versions and limits.
Other jobs in Installation, Maintenance, and Repair
- Computer, Automated Teller, and Office Machine Repairers (11% observed)
- First-Line Supervisors of Mechanics, Installers, and Repairers (10% observed)
- Camera and Photographic Equipment Repairers (4% observed)
- Telecommunications Equipment Installers and Repairers, Except Line Installers (3% observed)
- Security and Fire Alarm Systems Installers (3% observed)
- Industrial Machinery Mechanics (2% observed)
- Heating, Air Conditioning, and Refrigeration Mechanics and Installers (2% observed)
- Radio, Cellular, and Tower Equipment Installers and Repairers (0% observed)
Data built 2026-11-06. O*NET 31.0. Task match rates: 99.4% with the OpenAI/Penn labels, 99.2% with Anthropic usage.