noworkleft.com

Home › Jobs › Radio, Cellular, and Tower Equipment Installers and Repairers

Installation, Maintenance, and Repair · SOC 49-2021

Radio, Cellular, and Tower Equipment Installers and Repairers

Repair, install, or maintain mobile or stationary radio transmitting, broadcasting, and receiving equipment, and two-way radio communications systems used in cellular telecommunications, mobile broadband, ship-to-shore, aircraft-to-ground communications, and radio equipment in service and emergency vehicles. May test and analyze network coverage.

Will AI replace this job?

The data cannot say, and anyone who gives you a percentage for “replaced” is guessing. What it does show is a gap between three things, for the 30 tasks O*NET lists for this occupation:

Could an LLM do it?

3%

of tasks: an LLM alone could do the task or cut its time by half. Human raters say 3%, GPT-4 says 3%.

Counting tasks that need extra software around the model: 10%–13%.

Is it happening?

0 of 30 tasks

show measurable use in Claude conversations (Anthropic Economic Index). Anthropic’s occupation score, which counts only tasks that were also rated feasible, is 0%. Observed is a subset of “could” by construction.

Claude only, mostly US users, sampled periods in 2025. Not all AI use, and not employment.

What is left?

26 of 30 tasks

were rated “no LLM speed-up” by every rater (so, by Anthropic’s method, they cannot show up as observed use either). That is the part of the job these studies see no sign of AI touching.

It does not mean those tasks are safe. It means these methods found nothing there.

Task by task

Sorted with the tasks seen in use first. The three coloured squares are the three raters, in this order: human raters, GPT-4, GPT-4 with an alternative rubric. “Usage score” is Anthropic’s published task_penetration value; 0 means none seen.

LLM aloneneeds extra softwareno speed-up
Task (O*NET 31.0)Could an LLM?Claude usage score
Complete reports related to project status, progress, or other work details, using computer software. all raters none seen
Take site survey photos or photos of work performed, using digital cameras. all raters none seen
Locate tower sites where work is to be performed, using mapping software. (supplemental) all raters none seen
Read work orders, blueprints, plans, datasheets or site drawings to determine work to be done. 1 of 3 raters none seen
Inspect completed work to ensure all hardware is tight, antennas are level, hangers are properly fastened, proper support is in place, or adequate weather proofing has been installed. no rater none seen
Run appropriate power, ground, or coaxial cables. no rater none seen
Test operation of tower transmission components, using sweep testing tools or software. no rater none seen
Install all necessary transmission equipment components, including antennas or antenna mounts, surge arrestors, transmission lines, connectors, or tower-mounted amplifiers (TMAs). no rater none seen
Replace existing antennas with new antennas as directed. no rater none seen
Bolt equipment into place, using hand or power tools. no rater none seen
Install, connect, or test underground or aboveground grounding systems. no rater none seen
Check antenna positioning to ensure specified azimuths or mechanical tilts and adjust as necessary. no rater none seen
Transport equipment to work sites, using utility trucks and equipment trailers. no rater none seen
Climb towers to access components, using safety equipment, such as full-body harnesses. (supplemental) no rater none seen
Climb communication towers to install, replace, or repair antennas or auxiliary equipment used to transmit and receive radio waves. (supplemental) no rater none seen
Lift equipment into position, using cranes and rigging tools or equipment, such as gin poles. (supplemental) no rater none seen
Perform maintenance or repair work on existing tower equipment, using hand or power tools. (supplemental) no rater none seen
Install or repair tower lighting components, including strobes, beacons, or lighting controllers. (supplemental) no rater none seen
Calibrate and align components, using scales, gauges, and other measuring instruments. (supplemental) no rater none seen
Examine malfunctioning radio equipment to locate defects such as loose connections, broken wires, or burned-out components, using schematic diagrams and test equipment. (supplemental) no rater none seen
Insert plugs into receptacles and bolt or screw leads to terminals to connect equipment to power sources, using hand tools. (supplemental) no rater none seen
Install, adjust, and repair stationary and mobile radio transmitting and receiving equipment and two-way radio communication systems. (supplemental) no rater none seen
Monitor radio range stations to detect transmission flaws and adjust controls to eliminate flaws. (supplemental) no rater none seen
Mount equipment on transmission towers and in vehicles such as ships or ambulances. (supplemental) no rater none seen
Remove and replace defective components and parts such as conductors, resistors, semiconductors, and integrated circuits, using soldering irons, wire cutters, and hand tools. (supplemental) no rater none seen
Repair circuits, wiring, and soldering, using soldering irons and hand tools to install parts and adjust connections. (supplemental) no rater none seen
Test batteries, using hydrometers and ammeters, and charge batteries as necessary. (supplemental) no rater none seen
Test emergency transmitters to ensure their readiness for immediate use. (supplemental) no rater none seen
Test equipment functions such as signal strength and quality, transmission capacity, interference, and signal delay, using equipment such as oscilloscopes, circuit analyzers, frequency meters, and wattmeters. (supplemental) no rater none seen
Turn setscrews to adjust receivers for maximum sensitivity and transmitters for maximum output. (supplemental) no rater none seen
How to read this. These are averages over task lists written for the US labour market, rated by people and by GPT-4 using early-2023 model capabilities, next to a count of what one company’s chatbot users actually ask for. A task being “exposed” says nothing about whether employers will cut jobs, shift work, or hire more of you. See how to read an exposure score.

Try it with your own task list

Sources: task list from O*NET® Database (U.S. Department of Labor, CC BY 4.0; modified by noworkleft.com); “could” labels from Eloundou et al., GPTs are GPTs (OpenAI/University of Pennsylvania, MIT licence, labels from early-2023 models); “seen in use” from the Anthropic Economic Index (Claude usage only, CC BY). Dates, versions and limits.

Other jobs in Installation, Maintenance, and Repair

Data built 2026-11-06. O*NET 31.0. Task match rates: 99.4% with the OpenAI/Penn labels, 99.2% with Anthropic usage.