Installation, Maintenance, and Repair · SOC 49-9011
Mechanical Door Repairers
Install, service, or repair automatic door mechanisms and hydraulic doors. Includes garage door mechanics.
Will AI replace this job?
The data cannot say, and anyone who gives you a percentage for “replaced” is guessing. What it does show is a gap between three things, for the 25 tasks O*NET lists for this occupation:
Could an LLM do it?
4%–8%
of tasks: an LLM alone could do the task or cut its time by half. Human raters say 4%, GPT-4 says 8%.
Counting tasks that need extra software around the model: 8%–16%.
Is it happening?
0 of 25 tasks
show measurable use in Claude conversations (Anthropic Economic Index). Anthropic’s occupation score, which counts only tasks that were also rated feasible, is 0%. Observed is a subset of “could” by construction.
Claude only, mostly US users, sampled periods in 2025. Not all AI use, and not employment.
What is left?
21 of 25 tasks
were rated “no LLM speed-up” by every rater (so, by Anthropic’s method, they cannot show up as observed use either). That is the part of the job these studies see no sign of AI touching.
It does not mean those tasks are safe. It means these methods found nothing there.
Task by task
Sorted with the tasks seen in use first. The three coloured squares are the three raters, in this order: human raters, GPT-4, GPT-4 with an alternative rubric. “Usage score” is Anthropic’s published task_penetration value; 0 means none seen.
| Task (O*NET 31.0) | Could an LLM? | Claude usage score |
|---|---|---|
| Complete required paperwork, such as work orders, according to services performed or required. | all raters | none seen |
| Inspect job sites, assessing headroom, side room, or other conditions to determine appropriateness of door for a given location. | 2 of 3 raters | none seen |
| Collect payment upon job completion. | 2 of 3 raters | none seen |
| Study blueprints and schematic diagrams to determine appropriate methods of installing or repairing automated door openers. | 2 of 3 raters | none seen |
| Wind large springs with upward motion of arm. | no rater | none seen |
| Repair or replace worn or broken door parts, using hand tools. | no rater | none seen |
| Fasten angle iron back-hangers to ceilings and tracks, using fasteners or welding equipment. | no rater | none seen |
| Order replacement springs, sections, or slats. | no rater | none seen |
| Carry springs to tops of doors, using ladders or scaffolding, and attach springs to tracks to install spring systems. | no rater | none seen |
| Install door frames, rails, steel rolling curtains, electronic-eye mechanisms, or electric door openers and closers, using power tools, hand tools, and electronic test equipment. | no rater | none seen |
| Adjust doors to open or close with the correct amount of effort, or make simple adjustments to electric openers. | no rater | none seen |
| Set doors into place or stack hardware sections into openings after rail or track installation. | no rater | none seen |
| Assemble and fasten tracks to structures or bucks, using impact wrenches or welding equipment. | no rater | none seen |
| Prepare doors for hardware installation, such as drilling holes to install locks. | no rater | none seen |
| Cut door stops or angle irons to fit openings. | no rater | none seen |
| Remove or disassemble defective automatic mechanical door closers, using hand tools. | no rater | none seen |
| Run low voltage wiring on ceiling surfaces, using insulated staples. | no rater | none seen |
| Operate lifts, winches, or chain falls to move heavy curtain doors. | no rater | none seen |
| Install dock seals, bumpers, or shelters. | no rater | none seen |
| Lubricate door closer oil chambers, and pack spindles with leather washers. (supplemental) | no rater | none seen |
| Bore or cut holes in flooring as required for installation, using hand or power tools. (supplemental) | no rater | none seen |
| Clean door closer parts, using caustic soda, rotary brushes, or grinding wheels. (supplemental) | no rater | none seen |
| Set in and secure floor treadles for door-activating mechanisms, and connect power packs and electrical panelboards to treadles. (supplemental) | no rater | none seen |
| Fabricate replacements for worn or broken parts, using welders, lathes, drill presses, or shaping or milling machines. (supplemental) | no rater | none seen |
| Cover treadles with carpeting or other floor covering materials, and test systems by operating treadles. (supplemental) | no rater | none seen |
Try it with your own task list
Sources: task list from O*NET® Database (U.S. Department of Labor, CC BY 4.0; modified by noworkleft.com); “could” labels from Eloundou et al., GPTs are GPTs (OpenAI/University of Pennsylvania, MIT licence, labels from early-2023 models); “seen in use” from the Anthropic Economic Index (Claude usage only, CC BY). Dates, versions and limits.
Other jobs in Installation, Maintenance, and Repair
- Computer, Automated Teller, and Office Machine Repairers (11% observed)
- First-Line Supervisors of Mechanics, Installers, and Repairers (10% observed)
- Camera and Photographic Equipment Repairers (4% observed)
- Telecommunications Equipment Installers and Repairers, Except Line Installers (3% observed)
- Security and Fire Alarm Systems Installers (3% observed)
- Industrial Machinery Mechanics (2% observed)
- Heating, Air Conditioning, and Refrigeration Mechanics and Installers (2% observed)
- Radio, Cellular, and Tower Equipment Installers and Repairers (0% observed)
Data built 2026-11-06. O*NET 31.0. Task match rates: 99.4% with the OpenAI/Penn labels, 99.2% with Anthropic usage.