Production · SOC 51-4034
Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic
Set up, operate, or tend lathe and turning machines to turn, bore, thread, form, or face metal or plastic materials, such as wire, rod, or bar stock.
Will AI replace this job?
The data cannot say, and anyone who gives you a percentage for “replaced” is guessing. What it does show is a gap between three things, for the 18 tasks O*NET lists for this occupation:
Could an LLM do it?
0%–13%
of tasks: an LLM alone could do the task or cut its time by half. Human raters say 0%, GPT-4 says 13%.
Counting tasks that need extra software around the model: 6%–19%.
Is it happening?
0 of 18 tasks
show measurable use in Claude conversations (Anthropic Economic Index). Anthropic’s occupation score, which counts only tasks that were also rated feasible, is 0%. Observed is a subset of “could” by construction.
Claude only, mostly US users, sampled periods in 2025. Not all AI use, and not employment.
What is left?
15 of 18 tasks
were rated “no LLM speed-up” by every rater (so, by Anthropic’s method, they cannot show up as observed use either). That is the part of the job these studies see no sign of AI touching.
It does not mean those tasks are safe. It means these methods found nothing there.
Task by task
Sorted with the tasks seen in use first. The three coloured squares are the three raters, in this order: human raters, GPT-4, GPT-4 with an alternative rubric. “Usage score” is Anthropic’s published task_penetration value; 0 means none seen.
| Task (O*NET 31.0) | Could an LLM? | Claude usage score |
|---|---|---|
| Study blueprints, layouts or charts, and job orders for information on specifications and tooling instructions, and to determine material requirements and operational sequences. | 2 of 3 raters | none seen |
| Select cutting tools and tooling instructions, according to written specifications or knowledge of metal properties and shop mathematics. | 2 of 3 raters | none seen |
| Compute unspecified dimensions and machine settings, using knowledge of metal properties and shop mathematics. | 1 of 3 raters | none seen |
| Adjust machine controls and change tool settings to keep dimensions within specified tolerances. | no rater | none seen |
| Move controls to set cutting speeds and depths and feed rates, and to position tools in relation to workpieces. | no rater | none seen |
| Inspect sample workpieces to verify conformance with specifications, using instruments such as gauges, micrometers, and dial indicators. | no rater | none seen |
| Replace worn tools, and sharpen dull cutting tools and dies, using bench grinders or cutter-grinding machines. | no rater | none seen |
| Move toolholders manually or by turning handwheels, or engage automatic feeding mechanisms to feed tools to and along workpieces. | no rater | none seen |
| Crank machines through cycles, stopping to adjust tool positions and machine controls to ensure specified timing, clearances, and tolerances. | no rater | none seen |
| Position, secure, and align cutting tools in toolholders on machines, using hand tools, and verify their positions with measuring instruments. | no rater | none seen |
| Start lathe or turning machines and observe operations to ensure that specifications are met. | no rater | none seen |
| Program computer numerical control machines. | not rated | n/a |
| Refill, change, and monitor the level of fluids, such as oil and coolant, in machines. | no rater | none seen |
| Clean work area. | not rated | none seen |
| Lift metal stock or workpieces manually or using hoists, and position and secure them in machines, using fasteners and hand tools. | no rater | none seen |
| Install holding fixtures, cams, gears, and stops to control stock and tool movement, using hand tools, power tools, and measuring instruments. | no rater | none seen |
| Mount attachments, such as relieving or tracing attachments, to perform operations, such as duplicating contours of templates or trimming workpieces. | no rater | none seen |
| Turn valve handles to direct the flow of coolant onto work areas or to coat disks with spinning compounds. | no rater | none seen |
Try it with your own task list
Sources: task list from O*NET® Database (U.S. Department of Labor, CC BY 4.0; modified by noworkleft.com); “could” labels from Eloundou et al., GPTs are GPTs (OpenAI/University of Pennsylvania, MIT licence, labels from early-2023 models); “seen in use” from the Anthropic Economic Index (Claude usage only, CC BY). Dates, versions and limits.
Other jobs in Production
- Computer Numerically Controlled Tool Programmers (12% observed)
- Prepress Technicians and Workers (10% observed)
- Gas Plant Operators (7% observed)
- Aircraft Structure, Surfaces, Rigging, and Systems Assemblers (5% observed)
- Crushing, Grinding, and Polishing Machine Setters, Operators, and Tenders (4% observed)
- Petroleum Pump System Operators, Refinery Operators, and Gaugers (4% observed)
- Helpers--Production Workers (4% observed)
- Timing Device Assemblers and Adjusters (4% observed)
Data built 2026-11-06. O*NET 31.0. Task match rates: 99.4% with the OpenAI/Penn labels, 99.2% with Anthropic usage.