noworkleft.com

Home › Jobs › Installation, Maintenance, and Repair Workers, All Other

Installation, Maintenance, and Repair · SOC 49-9099

Installation, Maintenance, and Repair Workers, All Other

All installation, maintenance, and repair workers not listed separately.

Will AI replace this job?

The data cannot say, and anyone who gives you a percentage for “replaced” is guessing. What it does show is a gap between three things, for the 24 tasks O*NET lists for this occupation:

Could an LLM do it?

4%–21%

of tasks: an LLM alone could do the task or cut its time by half. Human raters say 21%, GPT-4 says 4%.

Counting tasks that need extra software around the model: 17%–29%.

Is it happening?

0 of 24 tasks

show measurable use in Claude conversations (Anthropic Economic Index). Anthropic’s occupation score, which counts only tasks that were also rated feasible, is 0%. Observed is a subset of “could” by construction.

Claude only, mostly US users, sampled periods in 2025. Not all AI use, and not employment.

What is left?

17 of 24 tasks

were rated “no LLM speed-up” by every rater (so, by Anthropic’s method, they cannot show up as observed use either). That is the part of the job these studies see no sign of AI touching.

It does not mean those tasks are safe. It means these methods found nothing there.

Task by task

Sorted with the tasks seen in use first. The three coloured squares are the three raters, in this order: human raters, GPT-4, GPT-4 with an alternative rubric. “Usage score” is Anthropic’s published task_penetration value; 0 means none seen.

LLM aloneneeds extra softwareno speed-up
Task (O*NET 31.0)Could an LLM?Claude usage score
Prepare and maintain logs, reports, or other documentation of work performed. all raters none seen
Collect and record data associated with operating geothermal power plants or well fields. all raters none seen
Identify equipment options, such as compressors, and make appropriate selections. all raters none seen
Design and lay out geothermal heat systems according to property characteristics, heating and cooling requirements, piping and equipment requirements, applicable regulations, or other factors. (supplemental) all raters none seen
Determine whether emergency or auxiliary systems will be needed to keep properties heated or cooled in extreme weather conditions. 2 of 3 raters none seen
Determine the type of geothermal loop system most suitable to a specific property and its heating and cooling needs. (supplemental) 2 of 3 raters none seen
Calculate heat loss and heat gain factors for residential properties to determine heating and cooling required by installed geothermal systems. (supplemental) 1 of 3 raters none seen
Monitor and adjust operations of geothermal power plant equipment or systems. no rater none seen
Identify and correct malfunctions of geothermal plant equipment, electrical systems, instrumentation, or controls. no rater none seen
Perform pre- and post-installation pressure, flow, and related tests of vertical and horizontal geothermal loop piping. no rater none seen
Adjust power production systems to meet load and distribution demands. (supplemental) no rater none seen
Maintain electrical switchgear, process controls, transmitters, gauges, and control equipment in accordance with geothermal plant procedures. (supplemental) no rater none seen
Maintain, calibrate, or repair plant instrumentation, control, and electronic devices in geothermal plants. (supplemental) no rater none seen
Install and maintain geothermal plant electrical protection equipment. (supplemental) no rater none seen
Install and maintain geothermal system instrumentation or controls. (supplemental) no rater none seen
Prepare newly installed geothermal heat systems for operation by flushing, purging, or other actions. (supplemental) no rater none seen
Weld piping, such as high density polyethylene (HDPE) piping, using techniques such as butt, socket, side-wall, and electro-fusion welding. (supplemental) no rater none seen
Test water sources for factors, such as flow volume and contaminant presence. (supplemental) no rater none seen
Install, maintain, or repair ground or water source-coupled heat pumps to heat and cool residential or commercial building air or water. (supplemental) no rater none seen
Integrate hot water heater systems with geothermal heat exchange systems. (supplemental) no rater none seen
Dig trenches for system piping to appropriate depths and lay piping in trenches. (supplemental) no rater none seen
Apply coatings or operate systems to mitigate corrosion of geothermal plant equipment or structures. (supplemental) no rater none seen
Backfill piping trenches to protect pipes from damage. (supplemental) no rater none seen
Operate equipment, such as excavators, backhoes, rock hammers, trench compactors, pavement saws, grout mixers or pumps, geothermal loop reels, and coil tubing units (CTU). (supplemental) no rater none seen
How to read this. These are averages over task lists written for the US labour market, rated by people and by GPT-4 using early-2023 model capabilities, next to a count of what one company’s chatbot users actually ask for. A task being “exposed” says nothing about whether employers will cut jobs, shift work, or hire more of you. See how to read an exposure score.

Try it with your own task list

Sources: task list from O*NET® Database (U.S. Department of Labor, CC BY 4.0; modified by noworkleft.com); “could” labels from Eloundou et al., GPTs are GPTs (OpenAI/University of Pennsylvania, MIT licence, labels from early-2023 models); “seen in use” from the Anthropic Economic Index (Claude usage only, CC BY). Dates, versions and limits.

Other jobs in Installation, Maintenance, and Repair

Data built 2026-11-06. O*NET 31.0. Task match rates: 99.4% with the OpenAI/Penn labels, 99.2% with Anthropic usage.