Production · SOC 51-4191
Heat Treating Equipment Setters, Operators, and Tenders, Metal and Plastic
Set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, soaking pits, or vacuum equipment to temper, harden, anneal, or heat treat metal or plastic objects.
Will AI replace this job?
The data cannot say, and anyone who gives you a percentage for “replaced” is guessing. What it does show is a gap between three things, for the 23 tasks O*NET lists for this occupation:
Could an LLM do it?
0%–17%
of tasks: an LLM alone could do the task or cut its time by half. Human raters say 0%, GPT-4 says 17%.
Counting tasks that need extra software around the model: 9%–17%.
Is it happening?
0 of 23 tasks
show measurable use in Claude conversations (Anthropic Economic Index). Anthropic’s occupation score, which counts only tasks that were also rated feasible, is 0%. Observed is a subset of “could” by construction.
Claude only, mostly US users, sampled periods in 2025. Not all AI use, and not employment.
What is left?
16 of 23 tasks
were rated “no LLM speed-up” by every rater (so, by Anthropic’s method, they cannot show up as observed use either). That is the part of the job these studies see no sign of AI touching.
It does not mean those tasks are safe. It means these methods found nothing there.
Task by task
Sorted with the tasks seen in use first. The three coloured squares are the three raters, in this order: human raters, GPT-4, GPT-4 with an alternative rubric. “Usage score” is Anthropic’s published task_penetration value; 0 means none seen.
| Task (O*NET 31.0) | Could an LLM? | Claude usage score |
|---|---|---|
| Record times that parts are removed from furnaces to document that objects have attained specified temperatures for specified times. | all raters | none seen |
| Read production schedules and work orders to determine processing sequences, furnace temperatures, and heat cycle requirements for objects to be heat-treated. | 1 of 3 raters | none seen |
| Instruct new workers in machine operation. | 1 of 3 raters | none seen |
| Determine flame temperatures, current frequencies, heating cycles, and induction heating coils needed, based on degree of hardness required and properties of stock to be treated. (supplemental) | 1 of 3 raters | none seen |
| Determine types and temperatures of baths and quenching media needed to attain specified part hardness, toughness, and ductility, using heat-treating charts and knowledge of methods, equipment, and metals. (supplemental) | 1 of 3 raters | none seen |
| Signal forklift operators to deposit or extract containers of parts into and from furnaces and quenching rinse tanks. (supplemental) | 1 of 3 raters | none seen |
| Stamp heat-treatment identification marks on parts, using hammers and punches. (supplemental) | 1 of 3 raters | none seen |
| Adjust controls to maintain temperatures and heating times, using thermal instruments and charts, dials and gauges of furnaces, and color of stock in furnaces to make setting determinations. | no rater | none seen |
| Start conveyors and open furnace doors to load stock, or signal crane operators to uncover soaking pits and lower ingots into them. | no rater | none seen |
| Set up and operate or tend machines, such as furnaces, baths, flame-hardening machines, and electronic induction machines, that harden, anneal, and heat-treat metal. | no rater | none seen |
| Remove parts from furnaces after specified times, and air dry or cool parts in water, oil brine, or other baths. | no rater | none seen |
| Move controls to light gas burners and to adjust gas and water flow and flame temperature. | no rater | none seen |
| Examine parts to ensure metal shades and colors conform to specifications, using knowledge of metal heat-treating. (supplemental) | no rater | none seen |
| Set and adjust speeds of reels and conveyors for prescribed time cycles to pass parts through continuous furnaces. (supplemental) | no rater | none seen |
| Load parts into containers and place containers on conveyors to be inserted into furnaces, or insert parts into furnaces. (supplemental) | no rater | none seen |
| Test parts for hardness, using hardness testing equipment, or by examining and feeling samples. (supplemental) | no rater | none seen |
| Mount workpieces in fixtures, on arbors, or between centers of machines. (supplemental) | no rater | none seen |
| Reduce heat when processing is complete to allow parts to cool in furnaces or machinery. (supplemental) | no rater | none seen |
| Mount fixtures and industrial coils on machines, using hand tools. (supplemental) | no rater | none seen |
| Heat billets, bars, plates, rods, and other stock to specified temperatures preparatory to forging, rolling, or processing, using oil, gas, or electrical furnaces. (supplemental) | no rater | none seen |
| Position stock in furnaces, using tongs, chain hoists, or pry bars. (supplemental) | no rater | none seen |
| Repair, replace, and maintain furnace equipment as needed, using hand tools. (supplemental) | no rater | none seen |
| Clean oxides and scales from parts or fittings, using steam sprays or chemical and water baths. (supplemental) | no rater | none seen |
Try it with your own task list
Sources: task list from O*NET® Database (U.S. Department of Labor, CC BY 4.0; modified by noworkleft.com); “could” labels from Eloundou et al., GPTs are GPTs (OpenAI/University of Pennsylvania, MIT licence, labels from early-2023 models); “seen in use” from the Anthropic Economic Index (Claude usage only, CC BY). Dates, versions and limits.
Other jobs in Production
- Computer Numerically Controlled Tool Programmers (12% observed)
- Prepress Technicians and Workers (10% observed)
- Gas Plant Operators (7% observed)
- Aircraft Structure, Surfaces, Rigging, and Systems Assemblers (5% observed)
- Crushing, Grinding, and Polishing Machine Setters, Operators, and Tenders (4% observed)
- Petroleum Pump System Operators, Refinery Operators, and Gaugers (4% observed)
- Helpers--Production Workers (4% observed)
- Timing Device Assemblers and Adjusters (4% observed)
Data built 2026-11-06. O*NET 31.0. Task match rates: 99.4% with the OpenAI/Penn labels, 99.2% with Anthropic usage.