Home › Jobs › Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic
Production · SOC 51-4033
Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic
Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.
Will AI replace this job?
The data cannot say, and anyone who gives you a percentage for “replaced” is guessing. What it does show is a gap between three things, for the 18 tasks O*NET lists for this occupation:
Could an LLM do it?
0%–6%
of tasks: an LLM alone could do the task or cut its time by half. Human raters say 0%, GPT-4 says 6%.
Counting tasks that need extra software around the model: 0%–11%.
Is it happening?
0 of 18 tasks
show measurable use in Claude conversations (Anthropic Economic Index). Anthropic’s occupation score, which counts only tasks that were also rated feasible, is 0%. Observed is a subset of “could” by construction.
Claude only, mostly US users, sampled periods in 2025. Not all AI use, and not employment.
What is left?
14 of 18 tasks
were rated “no LLM speed-up” by every rater (so, by Anthropic’s method, they cannot show up as observed use either). That is the part of the job these studies see no sign of AI touching.
It does not mean those tasks are safe. It means these methods found nothing there.
Task by task
Sorted with the tasks seen in use first. The three coloured squares are the three raters, in this order: human raters, GPT-4, GPT-4 with an alternative rubric. “Usage score” is Anthropic’s published task_penetration value; 0 means none seen.
| Task (O*NET 31.0) | Could an LLM? | Claude usage score |
|---|---|---|
| Study blueprints, work orders, or machining instructions to determine product specifications, tool requirements, and operational sequences. | 1 of 3 raters | none seen |
| Select machine tooling to be used, using knowledge of machine and production requirements. | 1 of 3 raters | none seen |
| Compute machine indexings and settings for specified dimensions and base reference points. | 1 of 3 raters | none seen |
| Repair or replace machine parts, using hand tools, or notify engineering personnel when corrective action is required. | 1 of 3 raters | none seen |
| Measure workpieces and lay out work, using precision measuring devices. | no rater | none seen |
| Inspect or measure finished workpieces to determine conformance to specifications, using measuring instruments, such as gauges or micrometers. | no rater | none seen |
| Set and adjust machine controls according to product specifications, using knowledge of machine operation. | no rater | none seen |
| Observe machine operations to detect any problems, making necessary adjustments to correct problems. | no rater | none seen |
| Activate machine start-up switches to grind, lap, hone, debar, shear, or cut workpieces, according to specifications. | no rater | none seen |
| Lift and position workpieces, manually or with hoists, and secure them in hoppers or on machine tables, faceplates, or chucks, using clamps. | no rater | none seen |
| Move machine controls to index workpieces, and to adjust machines for pre-selected operational settings. | no rater | none seen |
| Mount and position tools in machine chucks, spindles, or other tool holding devices, using hand tools. | no rater | none seen |
| Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic workpieces. | no rater | none seen |
| Brush or spray lubricating compounds on workpieces, or turn valve handles and direct flow of coolant against tools and workpieces. | no rater | none seen |
| Maintain stocks of machine parts and machining tools. (supplemental) | no rater | none seen |
| Adjust air cylinders and setting stops to set traverse lengths and feed arm strokes. (supplemental) | no rater | none seen |
| Slide spacers between buffs on spindles to set spacing. (supplemental) | no rater | none seen |
| Thread and hand-feed materials through machine cutters or abraders. (supplemental) | no rater | none seen |
Try it with your own task list
Sources: task list from O*NET® Database (U.S. Department of Labor, CC BY 4.0; modified by noworkleft.com); “could” labels from Eloundou et al., GPTs are GPTs (OpenAI/University of Pennsylvania, MIT licence, labels from early-2023 models); “seen in use” from the Anthropic Economic Index (Claude usage only, CC BY). Dates, versions and limits.
Other jobs in Production
- Computer Numerically Controlled Tool Programmers (12% observed)
- Prepress Technicians and Workers (10% observed)
- Gas Plant Operators (7% observed)
- Aircraft Structure, Surfaces, Rigging, and Systems Assemblers (5% observed)
- Crushing, Grinding, and Polishing Machine Setters, Operators, and Tenders (4% observed)
- Petroleum Pump System Operators, Refinery Operators, and Gaugers (4% observed)
- Helpers--Production Workers (4% observed)
- Timing Device Assemblers and Adjusters (4% observed)
Data built 2026-11-06. O*NET 31.0. Task match rates: 99.4% with the OpenAI/Penn labels, 99.2% with Anthropic usage.