Production · SOC 51-9051
Furnace, Kiln, Oven, Drier, and Kettle Operators and Tenders
Operate or tend heating equipment other than basic metal, plastic, or food processing equipment. Includes activities such as annealing glass, drying lumber, curing rubber, removing moisture from materials, or boiling soap.
Will AI replace this job?
The data cannot say, and anyone who gives you a percentage for “replaced” is guessing. What it does show is a gap between three things, for the 17 tasks O*NET lists for this occupation:
Could an LLM do it?
0%–12%
of tasks: an LLM alone could do the task or cut its time by half. Human raters say 0%, GPT-4 says 12%.
Counting tasks that need extra software around the model: 6%–12%.
Is it happening?
0 of 17 tasks
show measurable use in Claude conversations (Anthropic Economic Index). Anthropic’s occupation score, which counts only tasks that were also rated feasible, is 0%. Observed is a subset of “could” by construction.
Claude only, mostly US users, sampled periods in 2025. Not all AI use, and not employment.
What is left?
15 of 17 tasks
were rated “no LLM speed-up” by every rater (so, by Anthropic’s method, they cannot show up as observed use either). That is the part of the job these studies see no sign of AI touching.
It does not mean those tasks are safe. It means these methods found nothing there.
Task by task
Sorted with the tasks seen in use first. The three coloured squares are the three raters, in this order: human raters, GPT-4, GPT-4 with an alternative rubric. “Usage score” is Anthropic’s published task_penetration value; 0 means none seen.
| Task (O*NET 31.0) | Could an LLM? | Claude usage score |
|---|---|---|
| Record gauge readings, test results, and shift production in log books. | all raters | none seen |
| Read and interpret work orders and instructions to determine work assignments, process specifications, and production schedules. | 2 of 3 raters | none seen |
| Monitor equipment operation, gauges, and panel lights to detect deviations from standards. | no rater | none seen |
| Confer with supervisors or other equipment operators to report equipment malfunctions or to resolve production problems. | no rater | none seen |
| Press and adjust controls to activate, set, and regulate equipment according to specifications. | no rater | none seen |
| Examine or test samples of processed substances, or collect samples for laboratory testing, to ensure conformance to specifications. | no rater | none seen |
| Transport materials and products to and from work areas, manually or using carts, handtrucks, or hoists. | no rater | none seen |
| Stop equipment and clear blockages or jams, using fingers, wire, or hand tools. (supplemental) | no rater | none seen |
| Load equipment receptacles or conveyors with material to be processed, by hand or using hoists. (supplemental) | no rater | none seen |
| Remove products from equipment, manually or using hoists, and prepare them for storage, shipment, or additional processing. (supplemental) | no rater | none seen |
| Calculate amounts of materials to be loaded into furnaces, adjusting amounts as necessary for specific conditions. (supplemental) | no rater | none seen |
| Melt or refine metal before casting, calculating required temperatures, and observe metal color, adjusting controls as necessary to maintain required temperatures. (supplemental) | no rater | none seen |
| Weigh or measure specified amounts of ingredients or materials for processing, using devices such as scales and calipers. (supplemental) | no rater | none seen |
| Direct crane operators and crew members to load vessels with materials to be processed. (supplemental) | no rater | none seen |
| Feed fuel, such as coal and coke, into fireboxes or onto conveyors, and remove ashes from furnaces, using shovels and buckets. (supplemental) | no rater | none seen |
| Replace worn or defective equipment parts, using hand tools. (supplemental) | no rater | none seen |
| Clean, lubricate, and adjust equipment, using scrapers, solvents, air hoses, oil, and hand tools. (supplemental) | no rater | none seen |
Try it with your own task list
Sources: task list from O*NET® Database (U.S. Department of Labor, CC BY 4.0; modified by noworkleft.com); “could” labels from Eloundou et al., GPTs are GPTs (OpenAI/University of Pennsylvania, MIT licence, labels from early-2023 models); “seen in use” from the Anthropic Economic Index (Claude usage only, CC BY). Dates, versions and limits.
Other jobs in Production
- Computer Numerically Controlled Tool Programmers (12% observed)
- Prepress Technicians and Workers (10% observed)
- Gas Plant Operators (7% observed)
- Aircraft Structure, Surfaces, Rigging, and Systems Assemblers (5% observed)
- Crushing, Grinding, and Polishing Machine Setters, Operators, and Tenders (4% observed)
- Petroleum Pump System Operators, Refinery Operators, and Gaugers (4% observed)
- Helpers--Production Workers (4% observed)
- Timing Device Assemblers and Adjusters (4% observed)
Data built 2026-11-06. O*NET 31.0. Task match rates: 99.4% with the OpenAI/Penn labels, 99.2% with Anthropic usage.