Production · SOC 51-2051
Fiberglass Laminators and Fabricators
Laminate layers of fiberglass on molds to form boat decks and hulls, bodies for golf carts, automobiles, or other products.
Will AI replace this job?
The data cannot say, and anyone who gives you a percentage for “replaced” is guessing. What it does show is a gap between three things, for the 16 tasks O*NET lists for this occupation:
Could an LLM do it?
0%–6%
of tasks: an LLM alone could do the task or cut its time by half. Human raters say 6%, GPT-4 says 0%.
Counting tasks that need extra software around the model: 0%–6%.
Is it happening?
0 of 16 tasks
show measurable use in Claude conversations (Anthropic Economic Index). Anthropic’s occupation score, which counts only tasks that were also rated feasible, is 0%. Observed is a subset of “could” by construction.
Claude only, mostly US users, sampled periods in 2025. Not all AI use, and not employment.
What is left?
14 of 16 tasks
were rated “no LLM speed-up” by every rater (so, by Anthropic’s method, they cannot show up as observed use either). That is the part of the job these studies see no sign of AI touching.
It does not mean those tasks are safe. It means these methods found nothing there.
Task by task
Sorted with the tasks seen in use first. The three coloured squares are the three raters, in this order: human raters, GPT-4, GPT-4 with an alternative rubric. “Usage score” is Anthropic’s published task_penetration value; 0 means none seen.
| Task (O*NET 31.0) | Could an LLM? | Claude usage score |
|---|---|---|
| Select precut fiberglass mats, cloth, and wood-bracing materials as required by projects being assembled. | 1 of 3 raters | none seen |
| Check all dies, templates, and cutout patterns to be used in the manufacturing process to ensure that they conform to dimensional data, photographs, blueprints, samples, or customer specifications. (supplemental) | 1 of 3 raters | none seen |
| Release air bubbles and smooth seams, using rollers. | no rater | none seen |
| Spray chopped fiberglass, resins, and catalysts onto prepared molds or dies using pneumatic spray guns with chopper attachments. | no rater | none seen |
| Mix catalysts into resins, and saturate cloth and mats with mixtures, using brushes. | no rater | none seen |
| Check completed products for conformance to specifications and for defects by measuring with rulers or micrometers, by checking them visually, or by tapping them to detect bubbles or dead spots. | no rater | none seen |
| Pat or press layers of saturated mat or cloth into place on molds, using brushes or hands, and smooth out wrinkles and air bubbles with hands or squeegees. | no rater | none seen |
| Bond wood reinforcing strips to decks and cabin structures of watercraft, using resin-saturated fiberglass. | no rater | none seen |
| Trim excess materials from molds, using hand shears or trimming knives. | no rater | none seen |
| Apply layers of plastic resin to mold surfaces prior to placement of fiberglass mats, repeating layers until products have the desired thicknesses and plastics have jelled. (supplemental) | no rater | none seen |
| Inspect, clean, and assemble molds before beginning work. (supplemental) | no rater | none seen |
| Cure materials by letting them set at room temperature, placing them under heat lamps, or baking them in ovens. (supplemental) | no rater | none seen |
| Apply lacquers and waxes to mold surfaces to facilitate assembly and removal of laminated parts. (supplemental) | no rater | none seen |
| Repair or modify damaged or defective glass-fiber parts, checking thicknesses, densities, and contours to ensure a close fit after repair. (supplemental) | no rater | none seen |
| Mask off mold areas not to be laminated, using cellophane, wax paper, masking tape, or special sprays containing mold-release substances. (supplemental) | no rater | none seen |
| Trim cured materials by sawing them with diamond-impregnated cutoff wheels. (supplemental) | no rater | none seen |
Try it with your own task list
Sources: task list from O*NET® Database (U.S. Department of Labor, CC BY 4.0; modified by noworkleft.com); “could” labels from Eloundou et al., GPTs are GPTs (OpenAI/University of Pennsylvania, MIT licence, labels from early-2023 models); “seen in use” from the Anthropic Economic Index (Claude usage only, CC BY). Dates, versions and limits.
Other jobs in Production
- Computer Numerically Controlled Tool Programmers (12% observed)
- Prepress Technicians and Workers (10% observed)
- Gas Plant Operators (7% observed)
- Aircraft Structure, Surfaces, Rigging, and Systems Assemblers (5% observed)
- Crushing, Grinding, and Polishing Machine Setters, Operators, and Tenders (4% observed)
- Petroleum Pump System Operators, Refinery Operators, and Gaugers (4% observed)
- Helpers--Production Workers (4% observed)
- Timing Device Assemblers and Adjusters (4% observed)
Data built 2026-11-06. O*NET 31.0. Task match rates: 99.4% with the OpenAI/Penn labels, 99.2% with Anthropic usage.