noworkleft.com

Home › Jobs › Etchers and Engravers

Production · SOC 51-9194

Etchers and Engravers

Engrave or etch metal, wood, rubber, or other materials. Includes such workers as etcher-circuit processors, pantograph engravers, and silk screen etchers.

Will AI replace this job?

The data cannot say, and anyone who gives you a percentage for “replaced” is guessing. What it does show is a gap between three things, for the 26 tasks O*NET lists for this occupation:

Could an LLM do it?

0%

of tasks: an LLM alone could do the task or cut its time by half. Human raters say 0%, GPT-4 says 0%.

Counting tasks that need extra software around the model: 8%–27%.

Is it happening?

0 of 26 tasks

show measurable use in Claude conversations (Anthropic Economic Index). Anthropic’s occupation score, which counts only tasks that were also rated feasible, is 0%. Observed is a subset of “could” by construction.

Claude only, mostly US users, sampled periods in 2025. Not all AI use, and not employment.

What is left?

19 of 26 tasks

were rated “no LLM speed-up” by every rater (so, by Anthropic’s method, they cannot show up as observed use either). That is the part of the job these studies see no sign of AI touching.

It does not mean those tasks are safe. It means these methods found nothing there.

Task by task

Sorted with the tasks seen in use first. The three coloured squares are the three raters, in this order: human raters, GPT-4, GPT-4 with an alternative rubric. “Usage score” is Anthropic’s published task_penetration value; 0 means none seen.

LLM aloneneeds extra softwareno speed-up
Task (O*NET 31.0)Could an LLM?Claude usage score
Use computer software to design patterns for engraving. (supplemental) all raters none seen
Examine sketches, diagrams, samples, blueprints, or photographs to decide how designs are to be etched, cut, or engraved onto workpieces. 2 of 3 raters none seen
Sketch, trace, or scribe layout lines and designs on workpieces, plates, dies, or rollers, using compasses, scribers, gravers, or pencils. (supplemental) 2 of 3 raters none seen
Inspect etched work for depth of etching, uniformity, and defects, using calibrated microscopes, gauges, fingers, or magnifying lenses. 1 of 3 raters none seen
Measure and compute dimensions of lettering, designs, or patterns to be engraved. (supplemental) 1 of 3 raters none seen
Examine engraving for quality of cut, burrs, rough spots, and irregular or incomplete engraving. (supplemental) 1 of 3 raters none seen
Print proofs or examine designs to verify accuracy of engraving, and rework engraving as required. (supplemental) 1 of 3 raters none seen
Clean and polish engraved areas. no rater none seen
Prepare workpieces for etching or engraving by cutting, sanding, cleaning, polishing, or treating them with wax, acid resist, lime, etching powder, or light-sensitive enamel. (supplemental) no rater none seen
Engrave and print patterns, designs, etchings, trademarks, or lettering onto flat or curved surfaces of a wide variety of metal, glass, plastic, or paper items, using hand tools or hand-held power tools. (supplemental) no rater none seen
Prepare etching chemicals according to formulas, diluting acid with water to obtain solutions of specified concentration. (supplemental) no rater none seen
Expose workpieces to acid to develop etch patterns such as designs, lettering, or figures. (supplemental) no rater none seen
Adjust depths and sizes of cuts by adjusting heights of worktables, or by adjusting machine-arm gauges. (supplemental) no rater none seen
Neutralize workpieces to remove acid, wax, or enamel, using water, solvents, brushes, or specialized machines. (supplemental) no rater none seen
Transfer image to workpiece, using contact printer, pantograph stylus, silkscreen printing device, or stamp pad. (supplemental) no rater none seen
Set reduction scales to attain specified sizes of reproduction on workpieces, and set pantograph controls for required heights, depths, and widths of cuts. (supplemental) no rater none seen
Position and clamp workpieces, plates, or rollers in holding fixtures. (supplemental) no rater none seen
Remove wax or tape from etched glassware by using a stylus or knife, or by immersing ware in hot water. (supplemental) no rater none seen
Guide stylus over template, causing cutting tool to duplicate design or letters on workpiece. (supplemental) no rater none seen
Start machines and lower cutting tools to beginning points on patterns. (supplemental) no rater none seen
Determine machine settings, and move bars or levers to reproduce designs on rollers or plates. (supplemental) no rater none seen
Remove completed workpieces and place them in trays. (supplemental) no rater none seen
Insert cutting tools or bits into machines and secure them with wrenches. (supplemental) no rater none seen
Sandblast exposed areas of glass to cut designs in surfaces, using spray guns. (supplemental) no rater none seen
Fill etched characters with opaque paste to improve readability. (supplemental) no rater none seen
Brush or wipe acid over engraving to darken or highlight inscriptions. (supplemental) no rater none seen
How to read this. These are averages over task lists written for the US labour market, rated by people and by GPT-4 using early-2023 model capabilities, next to a count of what one company’s chatbot users actually ask for. A task being “exposed” says nothing about whether employers will cut jobs, shift work, or hire more of you. See how to read an exposure score.

Try it with your own task list

Sources: task list from O*NET® Database (U.S. Department of Labor, CC BY 4.0; modified by noworkleft.com); “could” labels from Eloundou et al., GPTs are GPTs (OpenAI/University of Pennsylvania, MIT licence, labels from early-2023 models); “seen in use” from the Anthropic Economic Index (Claude usage only, CC BY). Dates, versions and limits.

Other jobs in Production

Data built 2026-11-06. O*NET 31.0. Task match rates: 99.4% with the OpenAI/Penn labels, 99.2% with Anthropic usage.