noworkleft.com

Home › Jobs › Engineers, All Other

Architecture and Engineering · SOC 17-2199

Engineers, All Other

All engineers not listed separately.

Will AI replace this job?

The data cannot say, and anyone who gives you a percentage for “replaced” is guessing. What it does show is a gap between three things, for the 179 tasks O*NET lists for this occupation:

Could an LLM do it?

19%–22%

of tasks: an LLM alone could do the task or cut its time by half. Human raters say 19%, GPT-4 says 22%.

Counting tasks that need extra software around the model: 59%–84%.

Is it happening?

14 of 179 tasks

show measurable use in Claude conversations (Anthropic Economic Index). Anthropic’s occupation score, which counts only tasks that were also rated feasible, is 7%. Observed is a subset of “could” by construction.

Claude only, mostly US users, sampled periods in 2025. Not all AI use, and not employment.

What is left?

24 of 179 tasks

were rated “no LLM speed-up” by every rater (so, by Anthropic’s method, they cannot show up as observed use either). That is the part of the job these studies see no sign of AI touching.

It does not mean those tasks are safe. It means these methods found nothing there.

Task by task

Sorted with the tasks seen in use first. The three coloured squares are the three raters, in this order: human raters, GPT-4, GPT-4 with an alternative rubric. “Usage score” is Anthropic’s published task_penetration value; 0 means none seen.

LLM aloneneeds extra softwareno speed-up
Task (O*NET 31.0)Could an LLM?Claude usage score
Analyze, interpret, or create graphical representations of energy data, using engineering software. all raters 0.89
Promote awareness or use of alternative or renewable energy sources. all raters 0.93
Investigate characteristics such as cost, performance, or process capability of potential microelectromechanical systems (MEMS) device designs, using simulation or modeling software. all raters 0.76
Analyze system performance or operational requirements. all raters 0.88
Read current literature, talk with colleagues, continue education, or participate in professional organizations or conferences to keep abreast of developments in the field. all raters 0.72
Debug robotics programs. all raters 0.96
Provide technical support for robotic systems. all raters 0.85
Design software to control robotic systems for applications, such as military defense or manufacturing. all raters 0.90
Document robotic application development, maintenance, or changes. all raters 0.91
Provide scientific or technical guidance or expertise to scientists, engineers, technologists, technicians, or others, using knowledge of chemical, analytical, or biological processes as applied to micro and nanoscale systems. all raters 0.71
Prepare reports, deliver presentations, or participate in program review activities to communicate engineering results or recommendations. all raters 0.80
Write proposals to secure external funding or to partner with other companies. all raters 0.73
Provide technical guidance or support to customers on topics such as nanosystem start-up, maintenance, or use. all raters 0.86
Conduct experimental or virtual studies to investigate characteristics and processing principles of potential microelectromechanical systems (MEMS) technology. (supplemental) all raters 0.77
Identify and recommend energy savings strategies to achieve more energy-efficient operation. all raters none seen
Monitor and analyze energy consumption. all raters none seen
Prepare energy-related project reports or related documentation. all raters none seen
Monitor energy related design or construction issues, such as energy engineering, energy management, or sustainable design. all raters none seen
Train personnel or clients on topics such as energy management. all raters none seen
Advise clients or colleagues on topics such as climate control systems, energy modeling, data logging, sustainable design, or energy auditing. all raters none seen
Review architectural, mechanical, or electrical plans or specifications to evaluate energy efficiency. all raters none seen
Write or install energy management routines for building automation systems. all raters none seen
Create mechanical design documents for parts, assemblies, or finished products. all raters none seen
Design engineering systems for the automation of industrial tasks. all raters none seen
Maintain technical project files. all raters none seen
Identify materials appropriate for mechatronic system designs. all raters none seen
Research, select, or apply sensors, communication technologies, or control devices for motion control, position sensing, pressure sensing, or electronic communication. all raters none seen
Publish engineering reports documenting design details or qualification test results. all raters none seen
Determine the feasibility, costs, or performance benefits of new mechatronic equipment. all raters none seen
Create schematics and physical layouts of integrated microelectromechanical systems (MEMS) components or packaged assemblies consistent with process, functional, or package constraints. all raters none seen
Show the other 149 tasks
Create or maintain formal engineering documents, such as schematics, bills of materials, components or materials specifications, or packaging requirements. all raters none seen
Conduct analyses addressing issues such as failure, reliability, or yield improvement. all raters none seen
Propose product designs involving microelectromechanical systems (MEMS) technology, considering market data or customer requirements. all raters none seen
Develop formal documentation for microelectromechanical systems (MEMS) devices, including quality assurance guidance, quality control protocols, process control checklists, data collection, or reporting. all raters none seen
Write reports or proposals related to photonics research or development projects. all raters none seen
Determine applications of photonics appropriate to meet product objectives or features. all raters none seen
Conduct research on new photonics technologies. all raters none seen
Document photonics system or component design processes, including objectives, issues, or outcomes. all raters none seen
Create or maintain photonic design histories. all raters none seen
Determine commercial, industrial, scientific, or other uses for electro-optical applications or devices. all raters none seen
Review or approve designs, calculations, or cost estimates. all raters none seen
Process or interpret signals or sensor data. all raters none seen
Create back-ups of robot programs or parameters. all raters none seen
Conduct research on robotic technology to create new robotic systems or system capabilities. all raters none seen
Conduct research into the feasibility, design, operation, or performance of robotic mechanisms, components, or systems, such as planetary rovers, multiple mobile robots, reconfigurable robots, or man-machine interactions. all raters none seen
Write algorithms or programming code for ad hoc robotic applications. all raters none seen
Make system device lists or event timing charts. all raters none seen
Conduct research related to a range of nanotechnology topics, such as packaging, heat transfer, fluorescence detection, nanoparticle dispersion, hybrid systems, liquid systems, nanocomposites, nanofabrication, optoelectronics, or nanolithography. all raters none seen
Develop processes or identify equipment needed for pilot or commercial nanoscale scale production. all raters none seen
Apply nanotechnology to improve the performance or reduce the environmental impact of energy products, such as fuel cells or solar cells. all raters none seen
Identify new applications for existing nanotechnologies. all raters none seen
Design or engineer nanomaterials, nanodevices, nano-enabled products, or nanosystems, using three-dimensional computer-aided design (CAD) software. all raters none seen
Design nano-enabled products with reduced toxicity, increased durability, or improved energy efficiency. all raters none seen
Create or maintain wind farm layouts, schematics, or other visual documentation for wind farms. all raters none seen
Recommend process or infrastructure changes to improve wind turbine performance, reduce operational costs, or comply with regulations. all raters none seen
Create plans for solar energy system development, monitoring, and evaluation activities. all raters none seen
Design or coordinate design of photovoltaic (PV) or solar thermal systems, including system components, for residential and commercial buildings. all raters none seen
Create electrical single-line diagrams, panel schedules, or connection diagrams for solar electric systems, using computer-aided design (CAD) software. all raters none seen
Perform computer simulation of solar photovoltaic (PV) generation system performance or energy production to optimize efficiency. all raters none seen
Develop design specifications and functional requirements for residential, commercial, or industrial solar energy systems or components. all raters none seen
Develop standard operation procedures and quality or safety standards for solar installation work. all raters none seen
Create checklists for review or inspection of completed solar installation projects. all raters none seen
Perform thermal, stress, or cost reduction analyses for solar systems. all raters none seen
Research renewable or alternative energy systems or technologies, such as solar thermal or photovoltaic energy. (supplemental) all raters none seen
Consult with construction or renovation clients or other engineers on topics such as Leadership in Energy and Environmental Design (LEED) or Green Buildings. (supplemental) all raters none seen
Develop electronic, mechanical, or computerized processes to perform tasks in dangerous situations, such as underwater exploration or extraterrestrial mining. (supplemental) all raters none seen
Create embedded software design programs. (supplemental) all raters none seen
Design advanced electronic control systems for mechanical systems. (supplemental) all raters none seen
Design self-monitoring mechanical systems, such as gear systems that monitor loading or condition of systems to detect and prevent failures. (supplemental) all raters none seen
Design or develop automated control systems for environmental applications, such as waste processing, air quality, or water quality systems. (supplemental) all raters none seen
Evaluate materials, fabrication methods, joining methods, surface treatments, or packaging to ensure acceptable processing, performance, cost, sustainability, or availability. (supplemental) all raters none seen
Develop or file intellectual property and patent disclosure or application documents related to microelectromechanical systems (MEMS) devices, products, or systems. (supplemental) all raters none seen
Develop customer documentation, such as performance specifications, training manuals, or operating instructions. (supplemental) all raters none seen
Develop or validate product-specific test protocols, acceptance thresholds, or inspection tools for quality control testing or performance measurement. (supplemental) all raters none seen
Consider environmental issues when proposing product designs involving microelectromechanical systems (MEMS) technology. (supplemental) all raters none seen
Design or develop industrial air quality microsystems, such as carbon dioxide fixing devices. (supplemental) all raters none seen
Design or develop sensors to reduce the energy or resource requirements to operate appliances, such as washing machines or dishwashing machines. (supplemental) all raters none seen
Design solar energy photonics or other materials or devices to generate energy. (supplemental) all raters none seen
Design or program robotics systems for environmental clean-up applications to minimize human exposure to toxic or hazardous materials or to improve the quality or speed of clean-up operations. (supplemental) all raters none seen
Design robotics applications for manufacturers of green products, such as wind turbines or solar panels, to increase production time, eliminate waste, or reduce costs. (supplemental) all raters none seen
Design nano-based manufacturing processes to minimize water, chemical, or energy use, as well as to reduce waste production. (supplemental) all raters none seen
Design nanosystems with components such as nanocatalysts or nanofiltration devices to clean specific pollutants from hazardous waste sites. (supplemental) all raters none seen
Prepare nanotechnology-related invention disclosures or patent applications. (supplemental) all raters none seen
Design nanoparticle catalysts to detect or remove chemical or other pollutants from water, soil, or air. (supplemental) all raters none seen
Develop green building nanocoatings, such as self-cleaning, anti-stain, depolluting, anti-fogging, anti-icing, antimicrobial, moisture-resistant, or ultraviolet protectant coatings. (supplemental) all raters none seen
Provide engineering technical support to designers of prototype wind turbines. (supplemental) all raters none seen
Develop active control algorithms, electronics, software, electromechanical, or electrohydraulic systems for wind turbines. (supplemental) all raters none seen
Develop specifications for wind technology components, such as gearboxes, blades, generators, frequency converters, or pad transformers. (supplemental) all raters none seen
Perform root cause analysis on wind turbine tower component failures. (supplemental) all raters none seen
Write reports to document wind farm collector system test results. (supplemental) all raters none seen
Collect data for energy conservation analyses, using jobsite observation, field inspections, or sub-metering. 2 of 3 raters none seen
Conduct energy audits to evaluate energy use and to identify conservation and cost reduction measures. 2 of 3 raters none seen
Perform energy modeling, measurement, verification, commissioning, or retro-commissioning. 2 of 3 raters none seen
Verify energy bills and meter readings. 2 of 3 raters none seen
Manage the development, design, or construction of energy conservation projects to ensure acceptability of budgets and time lines, conformance to federal and state laws, or adherence to approved specifications. 2 of 3 raters none seen
Recommend best fuel for specific sites or circumstances. 2 of 3 raters none seen
Design advanced precision equipment for accurate or controlled applications. 2 of 3 raters none seen
Provide consultation or training on topics such as mechatronics or automated control. 2 of 3 raters none seen
Upgrade the design of existing devices by adding mechatronic elements. 2 of 3 raters none seen
Create mechanical models to simulate mechatronic design concepts. 2 of 3 raters none seen
Analyze existing development or manufacturing procedures and suggest improvements. 2 of 3 raters none seen
Plan or schedule engineering research or development projects involving microelectromechanical systems (MEMS) technology. 2 of 3 raters none seen
Communicate operating characteristics or performance experience to other engineers or designers for training or new product development purposes. 2 of 3 raters none seen
Assist in the transition of photonic prototypes to production. 2 of 3 raters none seen
Design electro-optical sensing or imaging systems. 2 of 3 raters none seen
Design photonics products, such as light sources, displays, or photovoltaics, to achieve increased energy efficiency. 2 of 3 raters none seen
Design robotic systems, such as automatic vehicle control, autonomous vehicles, advanced displays, advanced sensing, robotic platforms, computer vision, or telematics systems. 2 of 3 raters none seen
Evaluate robotic systems or prototypes. 2 of 3 raters none seen
Design automated robotic systems to increase production volume or precision in high-throughput operations, such as automated ribonucleic acid (RNA) analysis or sorting, moving, or stacking production materials. 2 of 3 raters none seen
Supervise technologists or technicians engaged in nanotechnology research or production. 2 of 3 raters none seen
Design or conduct tests of new nanotechnology products, processes, or systems. 2 of 3 raters none seen
Create designs or prototypes for nanosystem applications, such as biomedical delivery systems or atomic force microscopes. 2 of 3 raters none seen
Generate high-resolution images or measure force-distance curves, using techniques such as atomic force microscopy. 2 of 3 raters none seen
Create models to optimize the layout of wind farm access roads, crane pads, crane paths, collection systems, substations, switchyards, or transmission lines. 2 of 3 raters none seen
Review specifications and recommend engineering or manufacturing changes to achieve solar design objectives. 2 of 3 raters none seen
Review or negotiate energy purchase agreements. (supplemental) 2 of 3 raters none seen
Design, develop, or implement control circuits or algorithms for electromechanical or pneumatic devices or systems. (supplemental) 2 of 3 raters none seen
Refine final microelectromechanical systems (MEMS) design to optimize design for target dimensions, physical tolerances, or processing constraints. (supplemental) 2 of 3 raters none seen
Validate fabrication processes for microelectromechanical systems (MEMS), using statistical process control implementation, virtual process simulations, data mining, or life testing. (supplemental) 2 of 3 raters none seen
Design sensors or switches that require little or no power to operate for environmental monitoring or industrial metering applications. (supplemental) 2 of 3 raters none seen
Research or develop emerging microelectromechanical (MEMS) systems to convert nontraditional energy sources into power, such as ambient energy harvesters that convert environmental vibrations into usable energy. (supplemental) 2 of 3 raters none seen
Develop photonics sensing or manufacturing technologies to improve the efficiency of manufacturing or related processes. (supplemental) 2 of 3 raters none seen
Plan mobile robot paths and teach path plans to robots. (supplemental) 2 of 3 raters none seen
Automate assays on laboratory robotics. (supplemental) 2 of 3 raters none seen
Reengineer nanomaterials to improve biodegradability. (supplemental) 2 of 3 raters none seen
Integrate nanotechnology with antimicrobial properties into products, such as household or medical appliances, to reduce the development of bacteria or other microbes. (supplemental) 2 of 3 raters none seen
Develop catalysis or other green chemistry methods to synthesize nanomaterials, such as nanotubes, nanocrystals, nanorods, or nanowires. (supplemental) 2 of 3 raters none seen
Investigate experimental wind turbines or wind turbine technologies for properties such as aerodynamics, production, noise, and load. (supplemental) 2 of 3 raters none seen
Analyze operation of wind farms or wind farm components to determine reliability, performance, and compliance with specifications. (supplemental) 2 of 3 raters none seen
Design underground or overhead wind farm collector systems. (supplemental) 2 of 3 raters none seen
Design or develop vacuum tube collector systems for solar applications. (supplemental) 2 of 3 raters none seen
Inspect or monitor energy systems, including heating, ventilating, and air conditioning (HVAC) or daylighting systems to determine energy use or potential energy savings. 1 of 3 raters none seen
Direct the implementation of energy management projects. 1 of 3 raters none seen
Apply mechatronic or automated solutions to the transfer of materials, components, or finished goods. 1 of 3 raters none seen
Develop optical or imaging systems, such as optical imaging products, optical components, image processes, signal process technologies, or optical systems. 1 of 3 raters none seen
Conduct testing to determine functionality or optimization or to establish limits of photonics systems or components. 1 of 3 raters none seen
Train operators, engineers, or other personnel. 1 of 3 raters none seen
Design gas lasers, solid state lasers, infrared, or other light emitting or light sensitive devices. 1 of 3 raters none seen
Design end-of-arm tooling. 1 of 3 raters none seen
Integrate robotics with peripherals, such as welders, controllers, or other equipment. 1 of 3 raters none seen
Coordinate or supervise the work of suppliers or vendors in the designing, building, or testing of nanosystem devices, such as lenses or probes. 1 of 3 raters none seen
Conduct engineering site audits to collect structural, electrical, and related site information for use in the design of residential or commercial solar power systems. 1 of 3 raters none seen
Design mechatronics components for computer-controlled products, such as cameras, video recorders, automobiles, or airplanes. (supplemental) 1 of 3 raters none seen
Conduct or oversee the conduct of prototype development or microfabrication activities to ensure compliance to specifications and promote effective production processes. (supplemental) 1 of 3 raters none seen
Develop or validate specialized materials characterization procedures, such as thermal withstand, fatigue, notch sensitivity, abrasion, or hardness tests. (supplemental) 1 of 3 raters none seen
Manage new product introduction projects to ensure effective deployment of microelectromechanical systems (MEMS) devices or applications. (supplemental) 1 of 3 raters none seen
Conduct acceptance tests, vendor-qualification protocols, surveys, audits, corrective-action reviews, or performance monitoring of incoming materials or components to ensure conformance to specifications. (supplemental) 1 of 3 raters none seen
Develop or implement microelectromechanical systems (MEMS) processing tools, fixtures, gages, dies, molds, or trays. (supplemental) 1 of 3 raters none seen
Identify, procure, or develop test equipment, instrumentation, or facilities for characterization of microelectromechanical systems (MEMS) applications. (supplemental) 1 of 3 raters none seen
Design or redesign optical fibers to minimize energy loss. (supplemental) 1 of 3 raters none seen
Develop laser-processed designs, such as laser-cut medical devices. (supplemental) 1 of 3 raters none seen
Design or develop new crystals for photonics applications. (supplemental) 1 of 3 raters none seen
Design laser machining equipment for purposes such as high-speed ablation. (supplemental) 1 of 3 raters none seen
Oversee the work activities of wind farm consultants or subcontractors. (supplemental) 1 of 3 raters none seen
Monitor wind farm construction to ensure compliance with regulatory standards or environmental requirements. (supplemental) 1 of 3 raters none seen
Implement or test design solutions. no rater none seen
Oversee the work of contractors in accordance with project requirements. no rater none seen
Develop or test photonic prototypes or models. no rater none seen
Design, integrate, or test photonics systems or components. no rater none seen
Analyze, fabricate, or test fiber-optic links. no rater none seen
Oversee or provide expertise on manufacturing, assembly, or fabrication processes. no rater none seen
Build, configure, or test robots or robotic applications. no rater none seen
Supervise technologists, technicians, or other engineers. no rater none seen
Investigate mechanical failures or unexpected maintenance problems. no rater none seen
Install, calibrate, operate, or maintain robots. no rater none seen
Synthesize, process, or characterize nanomaterials, using advanced tools or techniques. no rater none seen
Engineer production processes for specific nanotechnology applications, such as electroplating, nanofabrication, or epoxy. no rater none seen
Provide technical direction or support to installation teams during installation, start-up, testing, system commissioning, or performance monitoring. no rater none seen
Monitor or calibrate automated systems, industrial control systems, or system components to maximize efficiency of production. (supplemental) no rater none seen
Conduct harsh environmental testing, accelerated aging, device characterization, or field trials to validate devices, using inspection tools, testing protocols, peripheral instrumentation, or modeling and simulation software. (supplemental) no rater none seen
Devise microelectromechanical systems (MEMS) production methods, such as integrated circuit fabrication, lithographic electroform modeling, or micromachining. (supplemental) no rater none seen
Demonstrate miniaturized systems that contain components, such as microsensors, microactuators, or integrated electronic circuits, fabricated on silicon or silicon carbide wafers. (supplemental) no rater none seen
Oversee operation of microelectromechanical systems (MEMS) fabrication or assembly equipment, such as handling, singulation, assembly, wire-bonding, soldering, or package sealing. (supplemental) no rater none seen
Design or develop energy products using nanomaterials or nanoprocesses, such as micro-nano machining. (supplemental) no rater none seen
Select, purchase, set up, operate, or troubleshoot state-of-the-art laser cutting equipment. (supplemental) no rater none seen
Test wind turbine components, using mechanical or electronic testing equipment. (supplemental) no rater none seen
Test wind turbine equipment to determine effects of stress or fatigue. (supplemental) no rater none seen
Direct balance of plant (BOP) construction, generator installation, testing, commissioning, or supervisory control and data acquisition (SCADA) to ensure compliance with specifications. (supplemental) no rater none seen
Test or evaluate photovoltaic (PV) cells or modules. (supplemental) no rater none seen
How to read this. These are averages over task lists written for the US labour market, rated by people and by GPT-4 using early-2023 model capabilities, next to a count of what one company’s chatbot users actually ask for. A task being “exposed” says nothing about whether employers will cut jobs, shift work, or hire more of you. See how to read an exposure score.

Try it with your own task list

Sources: task list from O*NET® Database (U.S. Department of Labor, CC BY 4.0; modified by noworkleft.com); “could” labels from Eloundou et al., GPTs are GPTs (OpenAI/University of Pennsylvania, MIT licence, labels from early-2023 models); “seen in use” from the Anthropic Economic Index (Claude usage only, CC BY). Dates, versions and limits.

Other jobs in Architecture and Engineering

Data built 2026-11-06. O*NET 31.0. Task match rates: 99.4% with the OpenAI/Penn labels, 99.2% with Anthropic usage.