Architecture and Engineering · SOC 17-2141
Mechanical Engineers
Perform engineering duties in planning and designing tools, engines, machines, and other mechanically functioning equipment. Oversee installation, operation, maintenance, and repair of equipment such as centralized heat, gas, water, and steam systems.
Will AI replace this job?
The data cannot say, and anyone who gives you a percentage for “replaced” is guessing. What it does show is a gap between three things, for the 79 tasks O*NET lists for this occupation:
Could an LLM do it?
20%–30%
of tasks: an LLM alone could do the task or cut its time by half. Human raters say 30%, GPT-4 says 20%.
Counting tasks that need extra software around the model: 60%–85%.
Is it happening?
7 of 79 tasks
show measurable use in Claude conversations (Anthropic Economic Index). Anthropic’s occupation score, which counts only tasks that were also rated feasible, is 8%. Observed is a subset of “could” by construction.
Claude only, mostly US users, sampled periods in 2025. Not all AI use, and not employment.
What is left?
10 of 79 tasks
were rated “no LLM speed-up” by every rater (so, by Anthropic’s method, they cannot show up as observed use either). That is the part of the job these studies see no sign of AI touching.
It does not mean those tasks are safe. It means these methods found nothing there.
Task by task
Sorted with the tasks seen in use first. The three coloured squares are the three raters, in this order: human raters, GPT-4, GPT-4 with an alternative rubric. “Usage score” is Anthropic’s published task_penetration value; 0 means none seen.
| Task (O*NET 31.0) | Could an LLM? | Claude usage score |
|---|---|---|
| Read and interpret blueprints, technical drawings, schematics, or computer-generated reports. | all raters | 0.98 |
| Recommend design modifications to eliminate machine or system malfunctions. | all raters | 0.83 |
| Provide technical customer service. | all raters | 0.95 |
| Write, review, or maintain engineering documentation. | all raters | 0.81 |
| Prepare or present technical or project status reports. | 2 of 3 raters | 0.81 |
| Develop calibration methodologies, test methodologies, or tools. | 2 of 3 raters | 0.78 |
| Solicit new business. (supplemental) | 2 of 3 raters | 0.97 |
| Research and analyze customer design proposals, specifications, manuals, or other data to evaluate the feasibility, cost, or maintenance requirements of designs or applications. | all raters | none seen |
| Assist drafters in developing the structural design of products, using drafting tools or computer-assisted drafting equipment or software. | all raters | none seen |
| Provide feedback to design engineers on customer problems or needs. | all raters | none seen |
| Write performance requirements for product development or engineering projects. | all raters | none seen |
| Estimate costs or submit bids for engineering, construction, or extraction projects. | all raters | none seen |
| Provide technical consultation or direction related to the development or production of fuel cell systems. | all raters | none seen |
| Plan or implement fuel cell cost reduction or product improvement projects in collaboration with other engineers, suppliers, support personnel, or customers. | all raters | none seen |
| Analyze fuel cell or related test data, using statistical software. | all raters | none seen |
| Define specifications for fuel cell materials. | all raters | none seen |
| Recommend or implement changes to fuel cell system designs. | all raters | none seen |
| Read current literature, attend meetings or conferences, or talk with colleagues to stay abreast of new technology or competitive products. | all raters | none seen |
| Manage fuel cell battery hybrid system architecture, including sizing of components, such as fuel cells, energy storage units, or electric drives. | all raters | none seen |
| Design or implement fuel cell testing or development programs. | all raters | none seen |
| Write technical reports or proposals related to engineering projects. | all raters | none seen |
| Simulate or model fuel cell, motor, or other system information, using simulation software programs. | all raters | none seen |
| Identify or define vehicle and system integration challenges for fuel cell vehicles. | all raters | none seen |
| Calculate the efficiency or power output of a fuel cell system or process. | all raters | none seen |
| Evaluate the power output, system cost, or environmental impact of new hydrogen or non-hydrogen fuel cell system designs. | all raters | none seen |
| Provide technical direction to other engineers or engineering support personnel. | all raters | none seen |
| Perform failure, variation, or root cause analyses. | all raters | none seen |
| Conduct research studies to develop new concepts in the field of automotive engineering. | all raters | none seen |
| Create design alternatives for vehicle components, such as camless or dual-clutch engines or alternative air-conditioning systems, to increase fuel efficiency. | all raters | none seen |
| Develop or implement operating methods or procedures. | all raters | none seen |
Show the other 49 tasks
| Develop engineering specifications or cost estimates for automotive design concepts. | all raters | none seen |
| Build models for algorithm or control feature verification testing. | all raters | none seen |
| Design control systems or algorithms for purposes such as automotive energy management, emissions management, or increased operational safety or performance. | all raters | none seen |
| Design vehicles for increased recyclability or use of natural, renewable, or recycled materials in vehicle construction. | all raters | none seen |
| Design integrated mechanical or alternative systems, such as mechanical cooling systems with natural ventilation systems, to improve energy efficiency. (supplemental) | all raters | none seen |
| Calculate energy losses for buildings, using equipment such as computers, combustion analyzers, or pressure gauges. (supplemental) | all raters | none seen |
| Recommend the use of utility or energy services that minimize carbon footprints. (supplemental) | all raters | none seen |
| Apply engineering principles or practices to emerging fields, such as robotics, waste management, or biomedical engineering. (supplemental) | all raters | none seen |
| Evaluate mechanical designs or prototypes for energy performance or environmental impact. (supplemental) | all raters | none seen |
| Establish or coordinate the maintenance or safety procedures, service schedule, or supply of materials required to maintain machines or equipment in the prescribed condition. (supplemental) | all raters | none seen |
| Develop or evaluate systems or methods of hydrogen storage for fuel cell applications. (supplemental) | all raters | none seen |
| Specify system components or direct modification of products to ensure conformance with engineering design, performance specifications, or environmental regulations. | 2 of 3 raters | none seen |
| Investigate equipment failures or difficulties to diagnose faulty operation and recommend remedial actions. | 2 of 3 raters | none seen |
| Conduct research that tests or analyzes the feasibility, design, operation, or performance of equipment, components, or systems. | 2 of 3 raters | none seen |
| Develop or test models of alternate designs or processing methods to assess feasibility, sustainability, operating condition effects, potential new applications, or necessity of modification. | 2 of 3 raters | none seen |
| Develop, coordinate, or monitor all aspects of production, including selection of manufacturing methods, fabrication, or operation of product designs. | 2 of 3 raters | none seen |
| Characterize component or fuel cell performances by generating operating maps, defining operating conditions, identifying design refinements, or executing durability assessments. | 2 of 3 raters | none seen |
| Conduct post-service or failure analyses, using electromechanical diagnostic principles or procedures. | 2 of 3 raters | none seen |
| Design fuel cell systems, subsystems, stacks, assemblies, or components, such as electric traction motors or power electronics. | 2 of 3 raters | none seen |
| Coordinate fuel cell engineering or test schedules with departments outside engineering, such as manufacturing. | 2 of 3 raters | none seen |
| Authorize release of fuel cell parts, components, or subsystems for production. | 2 of 3 raters | none seen |
| Calibrate vehicle systems, including control algorithms or other software systems. | 2 of 3 raters | none seen |
| Design or analyze automobile systems in areas such as aerodynamics, alternate fuels, ergonomics, hybrid power, brakes, transmissions, steering, calibration, safety, or diagnostics. | 2 of 3 raters | none seen |
| Establish production or quality control standards. | 2 of 3 raters | none seen |
| Alter or modify designs to obtain specified functional or operational performance. | 2 of 3 raters | none seen |
| Research or implement green automotive technologies involving alternative fuels, electric or hybrid cars, or lighter or more fuel-efficient vehicles. | 2 of 3 raters | none seen |
| Conduct automotive design reviews. | 2 of 3 raters | none seen |
| Design vehicles that use lighter materials, such as aluminum, magnesium alloy, or plastic, to improve fuel efficiency. | 2 of 3 raters | none seen |
| Develop specifications for vehicles powered by alternative fuels or alternative power methods. | 2 of 3 raters | none seen |
| Develop or integrate control feature requirements. | 2 of 3 raters | none seen |
| Research computerized automotive applications, such as telemetrics, intelligent transportation systems, artificial intelligence, or automatic control. | 2 of 3 raters | none seen |
| Read current literature, attend meetings or conferences, or talk with colleagues to stay abreast of new automotive technology or competitive products. | 2 of 3 raters | none seen |
| Study industrial processes to maximize the efficiency of equipment applications, including equipment placement. (supplemental) | 2 of 3 raters | none seen |
| Research, design, evaluate, install, operate, or maintain mechanical products, equipment, systems or processes to meet requirements. | 1 of 3 raters | none seen |
| Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information. | 1 of 3 raters | none seen |
| Conduct or direct system-level automotive testing. | 1 of 3 raters | none seen |
| Coordinate production activities with other functional units, such as procurement, maintenance, or quality control. | 1 of 3 raters | none seen |
| Select or install combined heat units, power units, cogeneration equipment, or trigeneration equipment that reduces energy use or pollution. (supplemental) | 1 of 3 raters | none seen |
| Design test control apparatus or equipment or develop procedures for testing products. (supplemental) | 1 of 3 raters | none seen |
| Oversee installation, operation, maintenance, or repair to ensure that machines or equipment are installed and functioning according to specifications. | no rater | none seen |
| Plan or conduct experiments to validate new materials, optimize startup protocols, reduce conditioning time, or examine contaminant tolerance. | no rater | none seen |
| Conduct fuel cell testing projects, using fuel cell test stations, analytical instruments, or electrochemical diagnostics, such as cyclic voltammetry or impedance spectroscopy. | no rater | none seen |
| Validate design of fuel cells, fuel cell components, or fuel cell systems. | no rater | none seen |
| Prepare test stations, instrumentation, or data acquisition systems for use in specific tests of fuel cell components or systems. | no rater | none seen |
| Develop fuel cell materials or fuel cell test equipment. | no rater | none seen |
| Fabricate prototypes of fuel cell components, assemblies, stacks, or systems. | no rater | none seen |
| Integrate electric drive subsystems with other vehicle systems to optimize performance or mitigate faults. | no rater | none seen |
| Perform personnel functions, such as supervision of production workers, technicians, technologists, or other engineers. (supplemental) | no rater | none seen |
| Direct the installation, operation, maintenance, or repair of renewable energy equipment, such as heating, ventilating, and air conditioning (HVAC) or water systems. (supplemental) | no rater | none seen |
Try it with your own task list
Sources: task list from O*NET® Database (U.S. Department of Labor, CC BY 4.0; modified by noworkleft.com); “could” labels from Eloundou et al., GPTs are GPTs (OpenAI/University of Pennsylvania, MIT licence, labels from early-2023 models); “seen in use” from the Anthropic Economic Index (Claude usage only, CC BY). Dates, versions and limits.
Other jobs in Architecture and Engineering
- Computer Hardware Engineers (15% observed)
- Bioengineers and Biomedical Engineers (13% observed)
- Environmental Engineering Technologists and Technicians (10% observed)
- Electronics Engineers, Except Computer (10% observed)
- Electrical and Electronics Drafters (9% observed)
- Cartographers and Photogrammetrists (8% observed)
- Architects, Except Landscape and Naval (8% observed)
- Civil Engineering Technologists and Technicians (8% observed)
Data built 2026-11-06. O*NET 31.0. Task match rates: 99.4% with the OpenAI/Penn labels, 99.2% with Anthropic usage.