noworkleft.com

Home › Jobs › Engineering Technologists and Technicians, Except Drafters, All Other

Architecture and Engineering · SOC 17-3029

Engineering Technologists and Technicians, Except Drafters, All Other

All engineering technologists and technicians, except drafters, not listed separately.

Will AI replace this job?

The data cannot say, and anyone who gives you a percentage for “replaced” is guessing. What it does show is a gap between three things, for the 40 tasks O*NET lists for this occupation:

Could an LLM do it?

5%

of tasks: an LLM alone could do the task or cut its time by half. Human raters say 5%, GPT-4 says 5%.

Counting tasks that need extra software around the model: 25%–43%.

Is it happening?

0 of 40 tasks

show measurable use in Claude conversations (Anthropic Economic Index). Anthropic’s occupation score, which counts only tasks that were also rated feasible, is 0%. Observed is a subset of “could” by construction.

Claude only, mostly US users, sampled periods in 2025. Not all AI use, and not employment.

What is left?

22 of 40 tasks

were rated “no LLM speed-up” by every rater (so, by Anthropic’s method, they cannot show up as observed use either). That is the part of the job these studies see no sign of AI touching.

It does not mean those tasks are safe. It means these methods found nothing there.

Task by task

Sorted with the tasks seen in use first. The three coloured squares are the three raters, in this order: human raters, GPT-4, GPT-4 with an alternative rubric. “Usage score” is Anthropic’s published task_penetration value; 0 means none seen.

LLM aloneneeds extra softwareno speed-up
Task (O*NET 31.0)Could an LLM?Claude usage score
Prepare reports on non-destructive testing results. all raters none seen
Document non-destructive testing methods, processes, or results. all raters none seen
Produce images of objects on film, using radiographic techniques. all raters none seen
Compute or record photonic test data. all raters none seen
Document procedures, such as calibration of optical or fiber optic equipment. all raters none seen
Assist engineers in the development of new products, fixtures, tools, or processes. all raters none seen
Recommend optical or optic equipment design or material changes to reduce costs or processing times. all raters none seen
Monitor inventory levels and order supplies as necessary. all raters none seen
Interpret the results of all methods of non-destructive testing (NDT), such as acoustic emission, electromagnetic, leak, liquid penetrant, magnetic particle, neutron radiographic, radiographic, thermal or infrared, ultrasonic, vibration analysis, and visual testing. 2 of 3 raters none seen
Interpret or evaluate test results in accordance with applicable codes, standards, specifications, or procedures. 2 of 3 raters none seen
Make radiographic images to detect flaws in objects while leaving objects intact. 2 of 3 raters none seen
Map the presence of imperfections within objects, using sonic measurements. 2 of 3 raters none seen
Identify defects in concrete or other building materials, using thermal or infrared testing. 2 of 3 raters none seen
Assist scientists or engineers in the conduct of photonic experiments. 2 of 3 raters none seen
Perform diagnostic analyses of processing steps, using analytical or metrological tools, such as microscopy, profilometry, or ellipsometry devices. (supplemental) 2 of 3 raters none seen
Lay out cutting lines for machining, using drafting tools. (supplemental) 2 of 3 raters none seen
Visually examine materials, structures, or components for signs of corrosion, metal fatigue, cracks, or other flaws, using tools and equipment such as endoscopes, closed-circuit television systems, and fiber optics. 1 of 3 raters none seen
Supervise or direct the work of non-destructive testing trainees or staff. 1 of 3 raters none seen
Identify defects in solid materials, using ultrasonic testing techniques. no rater none seen
Select, calibrate, or operate equipment used in the non-destructive testing of products or materials. no rater none seen
Examine structures or vehicles such as aircraft, trains, nuclear reactors, bridges, dams, and pipelines, using non-destructive testing techniques. no rater none seen
Conduct liquid penetrant tests to locate surface cracks by coating objects with fluorescent dyes, cleaning excess penetrant, and applying developer. no rater none seen
Develop or use new non-destructive testing methods, such as acoustic emission testing, leak testing, and thermal or infrared testing. no rater none seen
Maintain clean working environments, according to clean room standards. no rater none seen
Adjust or maintain equipment, such as lasers, laser systems, microscopes, oscilloscopes, pulse generators, power meters, beam analyzers, or energy measurement devices. no rater none seen
Set up or operate assembly or processing equipment, such as lasers, cameras, die bonders, wire bonders, dispensers, reflow ovens, soldering irons, die shears, wire pull testers, temperature or humidity chambers, or optical spectrum analyzers. no rater none seen
Test or perform failure analysis for optomechanical or optoelectrical products, according to test plans. no rater none seen
Set up or operate prototype or test apparatus, such as control consoles, collimators, recording equipment, or cables. no rater none seen
Evaluate material properties, using radio astronomy, voltage and amperage measurement, or rheometric flow measurement. (supplemental) no rater none seen
Assemble fiber optical, optoelectronic, or free-space optics components, subcomponents, assemblies, or subassemblies. (supplemental) no rater none seen
Show the other 10 tasks
Optimize photonic process parameters by making prototype or production devices. (supplemental) no rater none seen
Splice fibers, using fusion splicing or other techniques. (supplemental) no rater none seen
Build prototype optomechanical devices for use in equipment such as aerial cameras, gun sights, or telescopes. (supplemental) no rater none seen
Terminate, cure, polish, or test fiber cables with mechanical connectors. (supplemental) no rater none seen
Assemble or adjust parts or related electrical units of prototypes to prepare for testing. (supplemental) no rater none seen
Repair or calibrate products, such as surgical lasers. (supplemental) no rater none seen
Design, build, or modify fixtures used to assemble parts. (supplemental) no rater none seen
Assemble components of energy-efficient optical communications systems involving photonic switches, optical backplanes, or optoelectronic interfaces. (supplemental) no rater none seen
Mix, pour, or use processing chemicals or gases according to safety standards or established operating procedures. (supplemental) no rater none seen
Fabricate devices, such as optoelectronic or semiconductor devices. (supplemental) no rater none seen
How to read this. These are averages over task lists written for the US labour market, rated by people and by GPT-4 using early-2023 model capabilities, next to a count of what one company’s chatbot users actually ask for. A task being “exposed” says nothing about whether employers will cut jobs, shift work, or hire more of you. See how to read an exposure score.

Try it with your own task list

Sources: task list from O*NET® Database (U.S. Department of Labor, CC BY 4.0; modified by noworkleft.com); “could” labels from Eloundou et al., GPTs are GPTs (OpenAI/University of Pennsylvania, MIT licence, labels from early-2023 models); “seen in use” from the Anthropic Economic Index (Claude usage only, CC BY). Dates, versions and limits.

Other jobs in Architecture and Engineering

Data built 2026-11-06. O*NET 31.0. Task match rates: 99.4% with the OpenAI/Penn labels, 99.2% with Anthropic usage.