Architecture and Engineering · SOC 17-3024
Electro-Mechanical and Mechatronics Technologists and Technicians
Operate, test, maintain, or adjust unmanned, automated, servomechanical, or electromechanical equipment. May operate unmanned submarines, aircraft, or other equipment to observe or record visual information at sites such as oil rigs, crop fields, buildings, or for similar infrastructure, deep ocean exploration, or hazardous waste removal. May assist engineers in testing and designing robotics equipment.
Will AI replace this job?
The data cannot say, and anyone who gives you a percentage for “replaced” is guessing. What it does show is a gap between three things, for the 50 tasks O*NET lists for this occupation:
Could an LLM do it?
6%–26%
of tasks: an LLM alone could do the task or cut its time by half. Human raters say 6%, GPT-4 says 26%.
Counting tasks that need extra software around the model: 42%–54%.
Is it happening?
0 of 50 tasks
show measurable use in Claude conversations (Anthropic Economic Index). Anthropic’s occupation score, which counts only tasks that were also rated feasible, is 0%. Observed is a subset of “could” by construction.
Claude only, mostly US users, sampled periods in 2025. Not all AI use, and not employment.
What is left?
20 of 50 tasks
were rated “no LLM speed-up” by every rater (so, by Anthropic’s method, they cannot show up as observed use either). That is the part of the job these studies see no sign of AI touching.
It does not mean those tasks are safe. It means these methods found nothing there.
Task by task
Sorted with the tasks seen in use first. The three coloured squares are the three raters, in this order: human raters, GPT-4, GPT-4 with an alternative rubric. “Usage score” is Anthropic’s published task_penetration value; 0 means none seen.
| Task (O*NET 31.0) | Could an LLM? | Claude usage score |
|---|---|---|
| Install or program computer hardware or machine or instrumentation software in microprocessor-based systems. | all raters | none seen |
| Read blueprints, schematics, diagrams, or technical orders to determine methods and sequences of assembly. | all raters | none seen |
| Select electromechanical equipment, materials, components, or systems to meet functional specifications. | all raters | none seen |
| Establish and maintain inventory, records, or documentation systems. | all raters | none seen |
| Install, program, or repair programmable controllers, robot controllers, end-of-arm tools, or conveyors. | all raters | none seen |
| Maintain service records of robotic equipment or automated production systems. | all raters | none seen |
| Modify computer-controlled robot movements. | all raters | none seen |
| Evaluate the efficiency and reliability of industrial robotic systems, reprogramming or calibrating to achieve maximum quantity and quality. | all raters | none seen |
| Document robotics test procedures and results. | all raters | none seen |
| Assist engineers in the design, configuration, or application of robotic systems. | all raters | none seen |
| Prepare written documentation of electromechanical test results. (supplemental) | all raters | none seen |
| Develop or implement programs related to the environmental impact of engineering activities. (supplemental) | all raters | none seen |
| Analyze engineering designs of logic or digital circuitry, motor controls, instrumentation, or data acquisition for implementation into new or existing automated, servomechanical, or other electromechanical systems. (supplemental) | all raters | none seen |
| Conduct statistical studies to analyze or compare production costs for sustainable and nonsustainable designs. (supplemental) | all raters | none seen |
| Specify, coordinate, or conduct quality-control or quality-assurance programs and procedures. (supplemental) | all raters | none seen |
| Translate electromechanical drawings into design specifications, applying principles of engineering, thermal or fluid sciences, mathematics, or statistics. (supplemental) | all raters | none seen |
| Program complex robotic systems, such as vision systems. (supplemental) | all raters | none seen |
| Train robots, using artificial intelligence software or interactive training techniques, to perform simple or complex tasks, such as designing and carrying out a series of iterative tests of chemical samples. (supplemental) | all raters | none seen |
| Develop three-dimensional simulations of automation systems. (supplemental) | all raters | none seen |
| Produce electrical, electronic, or mechanical drawings or other related documents or graphics necessary for electromechanical design, using computer-aided design (CAD) software. | 2 of 3 raters | none seen |
| Develop, test, or program new robots. (supplemental) | 2 of 3 raters | none seen |
| Assist engineers to implement electromechanical designs in industrial or other settings. (supplemental) | 2 of 3 raters | none seen |
| Develop robotic path motions to maximize efficiency, safety, and quality. (supplemental) | 2 of 3 raters | none seen |
| Inspect parts for surface defects. | 1 of 3 raters | none seen |
| Troubleshoot robotic systems, using knowledge of microprocessors, programmable controllers, electronics, circuit analysis, mechanics, sensor or feedback systems, hydraulics, or pneumatics. | 1 of 3 raters | none seen |
| Determine whether selected electromechanical components comply with environmental standards and regulations. (supplemental) | 1 of 3 raters | none seen |
| Train others to install, use, or maintain robots. (supplemental) | 1 of 3 raters | none seen |
| Identify energy-conserving production or fabrication methods, such as by bending metal rather than cutting and welding or casting metal. (supplemental) | 1 of 3 raters | none seen |
| Inspect installation sites. (supplemental) | 1 of 3 raters | none seen |
| Maintain inventories of robotic production supplies, such as sensors or cables. (supplemental) | 1 of 3 raters | none seen |
Show the other 20 tasks
| Test performance of electromechanical assemblies, using test instruments such as oscilloscopes, electronic voltmeters, or bridges. | no rater | none seen |
| Modify, maintain, or repair electrical, electronic, or mechanical components, equipment, or systems to ensure proper functioning. | no rater | none seen |
| Install electrical or electronic parts and hardware in housings or assemblies, using soldering equipment and hand tools. | no rater | none seen |
| Verify part dimensions or clearances to ensure conformance to specifications, using precision measuring instruments. | no rater | none seen |
| Fabricate or assemble mechanical, electrical, or electronic components or assemblies. | no rater | none seen |
| Align, fit, or assemble component parts, using hand or power tools, fixtures, templates, or microscopes. | no rater | none seen |
| Make repairs to robots or peripheral equipment, such as replacement of defective circuit boards, sensors, controllers, encoders, or servomotors. | no rater | none seen |
| Perform preventive or corrective maintenance on robotic systems or components. | no rater | none seen |
| Align, fit, or assemble components, using hand tools, power tools, fixtures, templates, or microscopes. | no rater | none seen |
| Attach wires between controllers. | no rater | none seen |
| Test performance of robotic assemblies, using instruments such as oscilloscopes, electronic voltmeters, or bridges. | no rater | none seen |
| Train customers or other personnel to install, use, or maintain robots. | no rater | none seen |
| Build or assemble robotic devices or systems. | no rater | none seen |
| Install new robotic systems in stationary positions or on tracks. | no rater | none seen |
| Repair, rework, or calibrate hydraulic or pneumatic assemblies or systems to meet operational specifications or tolerances. (supplemental) | no rater | none seen |
| Select and use laboratory, operational, or diagnostic techniques or test equipment to assess electromechanical circuits, equipment, processes, systems, or subsystems. (supplemental) | no rater | none seen |
| Operate, test, or maintain robotic equipment used for green production applications, such as waste-to-energy conversion systems, minimization of material waste, or replacement of human operators in dangerous work environments. (supplemental) | no rater | none seen |
| Operate metalworking machines to fabricate housings, jigs, fittings, or fixtures. (supplemental) | no rater | none seen |
| Consult with machinists to ensure that electromechanical equipment or systems meet design specifications. (supplemental) | no rater | none seen |
| Fabricate housings, jigs, fittings, or fixtures, using metalworking machines. (supplemental) | no rater | none seen |
Try it with your own task list
Sources: task list from O*NET® Database (U.S. Department of Labor, CC BY 4.0; modified by noworkleft.com); “could” labels from Eloundou et al., GPTs are GPTs (OpenAI/University of Pennsylvania, MIT licence, labels from early-2023 models); “seen in use” from the Anthropic Economic Index (Claude usage only, CC BY). Dates, versions and limits.
Other jobs in Architecture and Engineering
- Computer Hardware Engineers (15% observed)
- Bioengineers and Biomedical Engineers (13% observed)
- Environmental Engineering Technologists and Technicians (10% observed)
- Electronics Engineers, Except Computer (10% observed)
- Electrical and Electronics Drafters (9% observed)
- Mechanical Engineers (8% observed)
- Cartographers and Photogrammetrists (8% observed)
- Architects, Except Landscape and Naval (8% observed)
Data built 2026-11-06. O*NET 31.0. Task match rates: 99.4% with the OpenAI/Penn labels, 99.2% with Anthropic usage.