Production · SOC 51-9032
Cutting and Slicing Machine Setters, Operators, and Tenders
Set up, operate, or tend machines that cut or slice materials, such as glass, stone, cork, rubber, tobacco, food, paper, or insulating material.
Will AI replace this job?
The data cannot say, and anyone who gives you a percentage for “replaced” is guessing. What it does show is a gap between three things, for the 28 tasks O*NET lists for this occupation:
Could an LLM do it?
0%–4%
of tasks: an LLM alone could do the task or cut its time by half. Human raters say 0%, GPT-4 says 4%.
Counting tasks that need extra software around the model: 4%–11%.
Is it happening?
1 of 28 tasks
show measurable use in Claude conversations (Anthropic Economic Index). Anthropic’s occupation score, which counts only tasks that were also rated feasible, is 3%. Observed is a subset of “could” by construction.
Claude only, mostly US users, sampled periods in 2025. Not all AI use, and not employment.
What is left?
25 of 28 tasks
were rated “no LLM speed-up” by every rater (so, by Anthropic’s method, they cannot show up as observed use either). That is the part of the job these studies see no sign of AI touching.
It does not mean those tasks are safe. It means these methods found nothing there.
Task by task
Sorted with the tasks seen in use first. The three coloured squares are the three raters, in this order: human raters, GPT-4, GPT-4 with an alternative rubric. “Usage score” is Anthropic’s published task_penetration value; 0 means none seen.
| Task (O*NET 31.0) | Could an LLM? | Claude usage score |
|---|---|---|
| Review work orders, blueprints, specifications, or job samples to determine components, settings, and adjustments for cutting and slicing machines. | 2 of 3 raters | 1.00 |
| Maintain production records, such as quantities, types, and dimensions of materials produced. | all raters | none seen |
| Type instructions on computer keyboards, push buttons to activate computer programs, or manually set cutting guides, clamps, and knives. | 1 of 3 raters | none seen |
| Remove defective or substandard materials from machines, and readjust machine components so that products meet standards. | no rater | none seen |
| Start machines to verify setups, and make any necessary adjustments. | no rater | none seen |
| Press buttons, pull levers, or depress pedals to start and operate cutting and slicing machines. | no rater | none seen |
| Adjust machine controls to alter position, alignment, speed, or pressure. | no rater | none seen |
| Examine, measure, and weigh materials or products to verify conformance to specifications, using measuring devices, such as rulers, micrometers, or scales. | no rater | none seen |
| Remove completed materials or products from cutting or slicing machines, and stack or store them for additional processing. | no rater | none seen |
| Stack and sort cut material for packaging, further processing, or shipping, according to types and sizes of material. | no rater | none seen |
| Select and install machine components, such as cutting blades, rollers, and templates, according to specifications, using hand tools. | no rater | none seen |
| Position stock along cutting lines, or against stops on beds of scoring or cutting machines. | no rater | none seen |
| Monitor operation of cutting or slicing machines to detect malfunctions or to determine whether supplies need replenishment. | no rater | none seen |
| Feed stock into cutting machines, onto conveyors, or under cutting blades, by threading, guiding, pushing, or turning handwheels. | no rater | none seen |
| Move stock or scrap to and from machines manually, or by using carts, handtrucks, or lift trucks. | no rater | none seen |
| Change or replace saw blades, cables, cutter heads, and grinding wheels, using hand tools. | no rater | none seen |
| Clean and lubricate cutting machines, conveyors, blades, saws, or knives, using steam hoses, scrapers, brushes, or oil cans. | no rater | none seen |
| Set up, operate, or tend machines that cut or slice materials, such as glass, stone, cork, rubber, tobacco, food, paper, or insulating material. | no rater | none seen |
| Mark cutting lines or identifying information on stock, using marking pencils, rulers, or scribes. | no rater | none seen |
| Start pumps to circulate water and abrasives onto blades or cables during cutting. (supplemental) | no rater | none seen |
| Direct workers on cutting teams. (supplemental) | no rater | none seen |
| Operate cranes, or signal crane operators to position or remove stone from cars or saw beds. (supplemental) | no rater | none seen |
| Tighten pulleys or add abrasives to maintain cutting speeds. (supplemental) | no rater | none seen |
| Position width gauge blocks between blades, and level blades and insert wedges into frames to secure blades to frames. (supplemental) | no rater | none seen |
| Sharpen cutting blades, knives, or saws, using files, bench grinders, or honing stones. (supplemental) | no rater | none seen |
| Cut stock manually to prepare for machine cutting, using tools such as knives, cleavers, handsaws, or hammers and chisels. (supplemental) | no rater | none seen |
| Turn cranks or press buttons to activate winches that move cars under sawing cables or saw frames. (supplemental) | no rater | none seen |
| Wash stones, using water hoses. (supplemental) | no rater | none seen |
Try it with your own task list
Sources: task list from O*NET® Database (U.S. Department of Labor, CC BY 4.0; modified by noworkleft.com); “could” labels from Eloundou et al., GPTs are GPTs (OpenAI/University of Pennsylvania, MIT licence, labels from early-2023 models); “seen in use” from the Anthropic Economic Index (Claude usage only, CC BY). Dates, versions and limits.
Other jobs in Production
- Computer Numerically Controlled Tool Programmers (12% observed)
- Prepress Technicians and Workers (10% observed)
- Gas Plant Operators (7% observed)
- Aircraft Structure, Surfaces, Rigging, and Systems Assemblers (5% observed)
- Crushing, Grinding, and Polishing Machine Setters, Operators, and Tenders (4% observed)
- Petroleum Pump System Operators, Refinery Operators, and Gaugers (4% observed)
- Helpers--Production Workers (4% observed)
- Timing Device Assemblers and Adjusters (4% observed)
Data built 2026-11-06. O*NET 31.0. Task match rates: 99.4% with the OpenAI/Penn labels, 99.2% with Anthropic usage.