Installation, Maintenance, and Repair · SOC 49-9012
Control and Valve Installers and Repairers, Except Mechanical Door
Install, repair, and maintain mechanical regulating and controlling devices, such as electric meters, gas regulators, thermostats, safety and flow valves, and other mechanical governors.
Will AI replace this job?
The data cannot say, and anyone who gives you a percentage for “replaced” is guessing. What it does show is a gap between three things, for the 32 tasks O*NET lists for this occupation:
Could an LLM do it?
3%–6%
of tasks: an LLM alone could do the task or cut its time by half. Human raters say 3%, GPT-4 says 6%.
Counting tasks that need extra software around the model: 6%–13%.
Is it happening?
0 of 32 tasks
show measurable use in Claude conversations (Anthropic Economic Index). Anthropic’s occupation score, which counts only tasks that were also rated feasible, is 0%. Observed is a subset of “could” by construction.
Claude only, mostly US users, sampled periods in 2025. Not all AI use, and not employment.
What is left?
28 of 32 tasks
were rated “no LLM speed-up” by every rater (so, by Anthropic’s method, they cannot show up as observed use either). That is the part of the job these studies see no sign of AI touching.
It does not mean those tasks are safe. It means these methods found nothing there.
Task by task
Sorted with the tasks seen in use first. The three coloured squares are the three raters, in this order: human raters, GPT-4, GPT-4 with an alternative rubric. “Usage score” is Anthropic’s published task_penetration value; 0 means none seen.
| Task (O*NET 31.0) | Could an LLM? | Claude usage score |
|---|---|---|
| Record maintenance information, including test results, material usage, and repairs made. | all raters | none seen |
| Record meter readings and installation data on meter cards, work orders, or field service orders, or enter data into hand-held computers. (supplemental) | all raters | none seen |
| Report hazardous field situations and damaged or missing meters. (supplemental) | 2 of 3 raters | none seen |
| Advise customers on proper installation of valves or regulators and related equipment. (supplemental) | 2 of 3 raters | none seen |
| Disassemble and repair mechanical control devices or valves, such as regulators, thermostats, or hydrants, using power tools, hand tools, and cutting torches. | no rater | none seen |
| Lubricate wearing surfaces of mechanical parts, using oils or other lubricants. | no rater | none seen |
| Calibrate instrumentation, such as meters, gauges, and regulators, for pressure, temperature, flow, and level. (supplemental) | no rater | none seen |
| Install, inspect and test electric meters, relays, and power sources to detect causes of malfunctions and inaccuracies, using hand tools and testing equipment. (supplemental) | no rater | none seen |
| Test valves and regulators for leaks and accurate temperature and pressure settings, using precision testing equipment. (supplemental) | no rater | none seen |
| Turn meters on or off to establish or close service. (supplemental) | no rater | none seen |
| Shut off service and notify repair crews when major repairs are required, such as the replacement of underground pipes or wiring. (supplemental) | no rater | none seen |
| Install regulators and related equipment such as gas meters, odorization units, and gas pressure telemetering equipment. (supplemental) | no rater | none seen |
| Cut seats to receive new orifices, tap inspection ports, and perform other repairs to salvage usable materials, using hand tools and machine tools. (supplemental) | no rater | none seen |
| Turn valves to allow measured amounts of air or gas to pass through meters at specified flow rates. (supplemental) | no rater | none seen |
| Vary air pressure flowing into regulators and turn handles to assess functioning of valves and pistons. (supplemental) | no rater | none seen |
| Examine valves or mechanical control device parts for defects, dents, or loose attachments, and mark malfunctioning areas of defective units. (supplemental) | no rater | none seen |
| Mount and install meters and other electric equipment such as time clocks, transformers, and circuit breakers, using electricians' hand tools. (supplemental) | no rater | none seen |
| Connect regulators to test stands, and turn screw adjustments until gauges indicate that inlet and outlet pressures meet specifications. (supplemental) | no rater | none seen |
| Investigate instances of illegal tapping into service lines. (supplemental) | no rater | none seen |
| Trace and tag meters or house lines. (supplemental) | no rater | none seen |
| Repair electric meters and components, such as transformers and relays, and replace metering devices, dial glasses, and faulty or incorrect wiring, using hand tools. (supplemental) | no rater | none seen |
| Replace defective parts, such as bellows, range springs, and toggle switches, and reassemble units according to blueprints, using cam presses and hand tools. (supplemental) | no rater | none seen |
| Measure tolerances of assembled and salvageable parts for conformance to standards or specifications, using gauges, micrometers, and calipers. (supplemental) | no rater | none seen |
| Clean internal compartments and moving parts, using rags and cleaning compounds. (supplemental) | no rater | none seen |
| Dismantle meters, and replace or adjust defective parts such as cases, shafts, gears, disks, and recording mechanisms, using soldering irons and hand tools. (supplemental) | no rater | none seen |
| Disconnect or remove defective or unauthorized meters, using hand tools. (supplemental) | no rater | none seen |
| Attach air hoses to meter inlets, plug outlets, and observe gauges for pressure losses to test internal seams for leaks. (supplemental) | no rater | none seen |
| Make adjustments to meter components, such as setscrews or timing mechanisms, so that they conform to specifications. (supplemental) | no rater | none seen |
| Repair leaks in valve seats or bellows of automotive heater thermostats, using soft solder, flux, and acetylene torches. (supplemental) | no rater | none seen |
| Splice and connect cables from meters or current transformers to pull boxes or switchboards, using hand tools. (supplemental) | no rater | none seen |
Show the other 2 tasks
| Clean plant growth, scale, paint, soil, or rust from meter housings, using wire brushes, scrapers, buffers, sandblasters, or cleaning compounds. (supplemental) | no rater | none seen |
| Connect hoses from provers to meter inlets and outlets, and raise prover bells until prover gauges register zero. (supplemental) | no rater | none seen |
Try it with your own task list
Sources: task list from O*NET® Database (U.S. Department of Labor, CC BY 4.0; modified by noworkleft.com); “could” labels from Eloundou et al., GPTs are GPTs (OpenAI/University of Pennsylvania, MIT licence, labels from early-2023 models); “seen in use” from the Anthropic Economic Index (Claude usage only, CC BY). Dates, versions and limits.
Other jobs in Installation, Maintenance, and Repair
- Computer, Automated Teller, and Office Machine Repairers (11% observed)
- First-Line Supervisors of Mechanics, Installers, and Repairers (10% observed)
- Camera and Photographic Equipment Repairers (4% observed)
- Telecommunications Equipment Installers and Repairers, Except Line Installers (3% observed)
- Security and Fire Alarm Systems Installers (3% observed)
- Industrial Machinery Mechanics (2% observed)
- Heating, Air Conditioning, and Refrigeration Mechanics and Installers (2% observed)
- Radio, Cellular, and Tower Equipment Installers and Repairers (0% observed)
Data built 2026-11-06. O*NET 31.0. Task match rates: 99.4% with the OpenAI/Penn labels, 99.2% with Anthropic usage.