noworkleft.com

Home › Jobs › Computer Numerically Controlled Tool Operators

Production · SOC 51-9161

Computer Numerically Controlled Tool Operators

Operate computer-controlled tools, machines, or robots to machine or process parts, tools, or other work pieces made of metal, plastic, wood, stone, or other materials. May also set up and maintain equipment.

Will AI replace this job?

The data cannot say, and anyone who gives you a percentage for “replaced” is guessing. What it does show is a gap between three things, for the 27 tasks O*NET lists for this occupation:

Could an LLM do it?

0%–22%

of tasks: an LLM alone could do the task or cut its time by half. Human raters say 0%, GPT-4 says 22%.

Counting tasks that need extra software around the model: 11%–37%.

Is it happening?

1 of 27 tasks

show measurable use in Claude conversations (Anthropic Economic Index). Anthropic’s occupation score, which counts only tasks that were also rated feasible, is 2%. Observed is a subset of “could” by construction.

Claude only, mostly US users, sampled periods in 2025. Not all AI use, and not employment.

What is left?

15 of 27 tasks

were rated “no LLM speed-up” by every rater (so, by Anthropic’s method, they cannot show up as observed use either). That is the part of the job these studies see no sign of AI touching.

It does not mean those tasks are safe. It means these methods found nothing there.

Task by task

Sorted with the tasks seen in use first. The three coloured squares are the three raters, in this order: human raters, GPT-4, GPT-4 with an alternative rubric. “Usage score” is Anthropic’s published task_penetration value; 0 means none seen.

LLM aloneneeds extra softwareno speed-up
Task (O*NET 31.0)Could an LLM?Claude usage score
Enter commands or load control media, such as tapes, cards, or disks, into machine controllers to retrieve programmed instructions. (supplemental) 2 of 3 raters 1.00
Implement changes to machine programs, and enter new specifications, using computers. all raters none seen
Modify cutting programs to account for problems encountered during operation, and save modified programs. all raters none seen
Write simple programs for computer-controlled machine tools. all raters none seen
Review program specifications or blueprints to determine and set machine operations and sequencing, finished workpiece dimensions, or numerical control sequences. 2 of 3 raters none seen
Transfer commands from servers to computer numerical control (CNC) modules, using computer network links. 2 of 3 raters none seen
Set up and operate computer-controlled machines or robots to perform one or more machine functions on metal or plastic workpieces. 1 of 3 raters none seen
Calculate machine speed and feed ratios and the size and position of cuts. 1 of 3 raters none seen
Insert control instructions into machine control units to start operation. 1 of 3 raters none seen
Input initial part dimensions into machine control panels. 1 of 3 raters none seen
Set up future jobs while machines are operating. 1 of 3 raters none seen
Examine electronic components for defects or completeness of laser-beam trimming, using microscopes. (supplemental) 1 of 3 raters none seen
Measure dimensions of finished workpieces to ensure conformance to specifications, using precision measuring instruments, templates, and fixtures. no rater none seen
Mount, install, align, and secure tools, attachments, fixtures, and workpieces on machines, using hand tools and precision measuring instruments. no rater none seen
Stop machines to remove finished workpieces or to change tooling, setup, or workpiece placement, according to required machining sequences. no rater none seen
Listen to machines during operation to detect sounds such as those made by dull cutting tools or excessive vibration, and adjust machines to compensate for problems. no rater none seen
Remove and replace dull cutting tools. no rater none seen
Check to ensure that workpieces are properly lubricated and cooled during machine operation. no rater none seen
Adjust machine feed and speed, change cutting tools, or adjust machine controls when automatic programming is faulty or if machines malfunction. no rater none seen
Monitor machine operation and control panel displays, and compare readings to specifications to detect malfunctions. no rater none seen
Maintain machines and remove and replace broken or worn machine tools, using hand tools. no rater none seen
Lift workpieces to machines manually or with hoists or cranes. no rater none seen
Confer with supervisors or programmers to resolve machine malfunctions or production errors or to obtain approval to continue production. no rater none seen
Stack or load finished items, or place items on conveyor systems. no rater none seen
Control coolant systems. no rater none seen
Clean machines, tooling, or parts, using solvents or solutions and rags. no rater none seen
Lay out and mark areas of parts to be shot peened and fill hoppers with shot. (supplemental) no rater none seen
How to read this. These are averages over task lists written for the US labour market, rated by people and by GPT-4 using early-2023 model capabilities, next to a count of what one company’s chatbot users actually ask for. A task being “exposed” says nothing about whether employers will cut jobs, shift work, or hire more of you. See how to read an exposure score.

Try it with your own task list

Sources: task list from O*NET® Database (U.S. Department of Labor, CC BY 4.0; modified by noworkleft.com); “could” labels from Eloundou et al., GPTs are GPTs (OpenAI/University of Pennsylvania, MIT licence, labels from early-2023 models); “seen in use” from the Anthropic Economic Index (Claude usage only, CC BY). Dates, versions and limits.

Other jobs in Production

Data built 2026-11-06. O*NET 31.0. Task match rates: 99.4% with the OpenAI/Penn labels, 99.2% with Anthropic usage.