Production · SOC 51-9124
Coating, Painting, and Spraying Machine Setters, Operators, and Tenders
Set up, operate, or tend spraying or rolling machines to coat or paint any of a wide variety of products, including glassware, cloth, ceramics, metal, plastic, paper, or wood, with lacquer, silver, copper, rubber, varnish, glaze, enamel, oil, or rust-proofing materials. Includes painters of transportation vehicles such as painters in auto body repair facilities.
Will AI replace this job?
The data cannot say, and anyone who gives you a percentage for “replaced” is guessing. What it does show is a gap between three things, for the 29 tasks O*NET lists for this occupation:
Could an LLM do it?
0%–3%
of tasks: an LLM alone could do the task or cut its time by half. Human raters say 0%, GPT-4 says 3%.
Counting tasks that need extra software around the model: 3%–7%.
Is it happening?
1 of 29 tasks
show measurable use in Claude conversations (Anthropic Economic Index). Anthropic’s occupation score, which counts only tasks that were also rated feasible, is 0%. Observed is a subset of “could” by construction.
Claude only, mostly US users, sampled periods in 2025. Not all AI use, and not employment.
What is left?
27 of 29 tasks
were rated “no LLM speed-up” by every rater (so, by Anthropic’s method, they cannot show up as observed use either). That is the part of the job these studies see no sign of AI touching.
It does not mean those tasks are safe. It means these methods found nothing there.
Task by task
Sorted with the tasks seen in use first. The three coloured squares are the three raters, in this order: human raters, GPT-4, GPT-4 with an alternative rubric. “Usage score” is Anthropic’s published task_penetration value; 0 means none seen.
| Task (O*NET 31.0) | Could an LLM? | Claude usage score |
|---|---|---|
| Record operational data on specified forms. (supplemental) | all raters | 1.00 |
| Examine, measure, weigh, or test sample products to ensure conformance to specifications. | 1 of 3 raters | none seen |
| Dispose of hazardous waste in an appropriate manner. | no rater | none seen |
| Hold or position spray guns to direct spray onto articles. | no rater | none seen |
| Spray prepared surfaces with specified amounts of primers and decorative or finish coatings. | no rater | none seen |
| Monitor painting operations to identify flaws, such as blisters or streaks, and correct their causes. | no rater | none seen |
| Disassemble, clean, and reassemble sprayers or power equipment, using solvents, wire brushes, and cloths. | no rater | none seen |
| Fill hoppers, reservoirs, troughs, or pans with material used to coat, paint, or spray, using conveyors or pails. | no rater | none seen |
| Clean equipment and work areas. | no rater | none seen |
| Apply rust-resistant undercoats and caulk and seal seams. | no rater | none seen |
| Start and stop operation of machines, using levers or buttons. | no rater | none seen |
| Determine paint flow, viscosity, and coating quality by performing visual inspections, or by using viscometers. | no rater | none seen |
| Attach hoses or nozzles to machines, using wrenches and pliers, and make adjustments to obtain the proper dispersion of spray. | no rater | none seen |
| Turn dials, handwheels, valves, or switches to regulate conveyor speeds, machine temperature, air pressure and circulation, and the flow or spray of coatings or paints. | no rater | none seen |
| Observe machine gauges and equipment operation to detect defects or deviations from standards, and make adjustments as necessary. | no rater | none seen |
| Buff and wax the finished paintwork. | no rater | none seen |
| Use brush to hand-paint areas in need of retouching or unreachable with a spray gun. | no rater | none seen |
| Thread or feed items or products through or around machine rollers and dryers. (supplemental) | no rater | none seen |
| Weigh or measure chemicals, coatings, or paints before adding them to machines. (supplemental) | no rater | none seen |
| Operate auxiliary machines or equipment used in coating or painting processes. (supplemental) | no rater | none seen |
| Remove materials, parts, or workpieces from painting or coating machines, using hand tools. (supplemental) | no rater | none seen |
| Operate lifting or moving devices to move equipment or materials to access areas to be painted. (supplemental) | no rater | none seen |
| Set up portable equipment, such as ventilators, exhaust units, ladders, or scaffolding. (supplemental) | no rater | none seen |
| Adjust controls on infrared ovens, heat lamps, portable ventilators, or exhaust units to speed the drying of surfaces between coats. (supplemental) | no rater | none seen |
| Apply primer over any repairs made to surfaces. (supplemental) | no rater | none seen |
| Fill small dents or scratches with body fillers and smooth surfaces to prepare for painting. (supplemental) | no rater | none seen |
| Mix paints to match color specifications or original colors, stirring or thinning paints, using spatulas or power mixing equipment. (supplemental) | no rater | none seen |
| Remove grease, dirt, paint, or rust from surfaces in preparation for paint application, using abrasives, solvents, brushes, blowtorches, washing tanks, or sandblasters. (supplemental) | no rater | none seen |
| Sand and apply sealer to properly dried finish. (supplemental) | no rater | none seen |
Try it with your own task list
Sources: task list from O*NET® Database (U.S. Department of Labor, CC BY 4.0; modified by noworkleft.com); “could” labels from Eloundou et al., GPTs are GPTs (OpenAI/University of Pennsylvania, MIT licence, labels from early-2023 models); “seen in use” from the Anthropic Economic Index (Claude usage only, CC BY). Dates, versions and limits.
Other jobs in Production
- Computer Numerically Controlled Tool Programmers (12% observed)
- Prepress Technicians and Workers (10% observed)
- Gas Plant Operators (7% observed)
- Aircraft Structure, Surfaces, Rigging, and Systems Assemblers (5% observed)
- Crushing, Grinding, and Polishing Machine Setters, Operators, and Tenders (4% observed)
- Petroleum Pump System Operators, Refinery Operators, and Gaugers (4% observed)
- Helpers--Production Workers (4% observed)
- Timing Device Assemblers and Adjusters (4% observed)
Data built 2026-11-06. O*NET 31.0. Task match rates: 99.4% with the OpenAI/Penn labels, 99.2% with Anthropic usage.