Production · SOC 51-9011
Chemical Equipment Operators and Tenders
Operate or tend equipment to control chemical changes or reactions in the processing of industrial or consumer products. Equipment used includes devulcanizers, steam-jacketed kettles, and reactor vessels.
Will AI replace this job?
The data cannot say, and anyone who gives you a percentage for “replaced” is guessing. What it does show is a gap between three things, for the 24 tasks O*NET lists for this occupation:
Could an LLM do it?
4%–9%
of tasks: an LLM alone could do the task or cut its time by half. Human raters say 4%, GPT-4 says 9%.
Counting tasks that need extra software around the model: 9%–22%.
Is it happening?
0 of 24 tasks
show measurable use in Claude conversations (Anthropic Economic Index). Anthropic’s occupation score, which counts only tasks that were also rated feasible, is 0%. Observed is a subset of “could” by construction.
Claude only, mostly US users, sampled periods in 2025. Not all AI use, and not employment.
What is left?
19 of 24 tasks
were rated “no LLM speed-up” by every rater (so, by Anthropic’s method, they cannot show up as observed use either). That is the part of the job these studies see no sign of AI touching.
It does not mean those tasks are safe. It means these methods found nothing there.
Task by task
Sorted with the tasks seen in use first. The three coloured squares are the three raters, in this order: human raters, GPT-4, GPT-4 with an alternative rubric. “Usage score” is Anthropic’s published task_penetration value; 0 means none seen.
| Task (O*NET 31.0) | Could an LLM? | Claude usage score |
|---|---|---|
| Record operational data, such as temperatures, pressures, ingredients used, processing times, or test results. | all raters | none seen |
| Estimate materials required for production and manufacturing of products. | all raters | none seen |
| Read plant specifications to determine products, ingredients, or prescribed modifications of plant procedures. | 2 of 3 raters | none seen |
| Inventory supplies received and consumed. (supplemental) | 2 of 3 raters | none seen |
| Observe and compare colors and consistencies of products to instrument readings and to laboratory and standard test results. | 1 of 3 raters | none seen |
| Observe safety precautions to prevent fires or explosions. | no rater | none seen |
| Patrol work areas to detect leaks or equipment malfunctions or to monitor operating conditions. | no rater | none seen |
| Monitor gauges, recording instruments, flowmeters, or products to ensure that specified conditions are maintained. | no rater | none seen |
| Inspect equipment or units to detect leaks or malfunctions, shutting equipment down, if necessary. | no rater | none seen |
| Draw samples of products at specified stages so that analyses can be performed. | no rater | none seen |
| Measure, weigh, and mix chemical ingredients, according to specifications. | no rater | none seen |
| Open valves or start pumps, agitators, reactors, blowers, or automatic feed of materials. | no rater | none seen |
| Test product samples for specific gravity, chemical characteristics, pH levels, concentrations, or viscosities, or send them to laboratories for testing. | no rater | none seen |
| Adjust controls to regulate temperature, pressure, feed, or flow of liquids or gases and times of prescribed reactions, according to knowledge of equipment and processes. | no rater | none seen |
| Control or operate equipment in which chemical changes or reactions take place during the processing of industrial or consumer products. | no rater | none seen |
| Load products into tanks for shipment. | not rated | n/a |
| Dump or scoop prescribed solid, granular, or powdered materials into equipment. | no rater | none seen |
| Notify maintenance engineers of equipment malfunctions. | no rater | none seen |
| Drain equipment, and pump water or other solutions through to flush and clean tanks or equipment. | no rater | none seen |
| Add treating or neutralizing agents to products, and pump products through filters or centrifuges to remove impurities or to precipitate products. | no rater | none seen |
| Implement appropriate industrial emergency response procedures. | no rater | none seen |
| Make minor repairs, lubricate, and maintain equipment, using hand tools. | no rater | none seen |
| Flush or clean equipment, using steam hoses or mechanical reamers. | no rater | none seen |
| Direct activities of workers assisting in control or verification of processes or in unloading of materials. | no rater | none seen |
Try it with your own task list
Sources: task list from O*NET® Database (U.S. Department of Labor, CC BY 4.0; modified by noworkleft.com); “could” labels from Eloundou et al., GPTs are GPTs (OpenAI/University of Pennsylvania, MIT licence, labels from early-2023 models); “seen in use” from the Anthropic Economic Index (Claude usage only, CC BY). Dates, versions and limits.
Other jobs in Production
- Computer Numerically Controlled Tool Programmers (12% observed)
- Prepress Technicians and Workers (10% observed)
- Gas Plant Operators (7% observed)
- Aircraft Structure, Surfaces, Rigging, and Systems Assemblers (5% observed)
- Crushing, Grinding, and Polishing Machine Setters, Operators, and Tenders (4% observed)
- Petroleum Pump System Operators, Refinery Operators, and Gaugers (4% observed)
- Helpers--Production Workers (4% observed)
- Timing Device Assemblers and Adjusters (4% observed)
Data built 2026-11-06. O*NET 31.0. Task match rates: 99.4% with the OpenAI/Penn labels, 99.2% with Anthropic usage.