noworkleft.com

Home › Jobs › Cement Masons and Concrete Finishers

Construction and Extraction · SOC 47-2051

Cement Masons and Concrete Finishers

Smooth and finish surfaces of poured concrete, such as floors, walks, sidewalks, roads, or curbs using a variety of hand and power tools. Align forms for sidewalks, curbs, or gutters; patch voids; and use saws to cut expansion joints.

Will AI replace this job?

The data cannot say, and anyone who gives you a percentage for “replaced” is guessing. What it does show is a gap between three things, for the 26 tasks O*NET lists for this occupation:

Could an LLM do it?

0%

of tasks: an LLM alone could do the task or cut its time by half. Human raters say 0%, GPT-4 says 0%.

Counting tasks that need extra software around the model: 0%–0%.

Is it happening?

0 of 26 tasks

show measurable use in Claude conversations (Anthropic Economic Index). Anthropic’s occupation score, which counts only tasks that were also rated feasible, is 0%. Observed is a subset of “could” by construction.

Claude only, mostly US users, sampled periods in 2025. Not all AI use, and not employment.

What is left?

26 of 26 tasks

were rated “no LLM speed-up” by every rater (so, by Anthropic’s method, they cannot show up as observed use either). That is the part of the job these studies see no sign of AI touching.

It does not mean those tasks are safe. It means these methods found nothing there.

Task by task

Sorted with the tasks seen in use first. The three coloured squares are the three raters, in this order: human raters, GPT-4, GPT-4 with an alternative rubric. “Usage score” is Anthropic’s published task_penetration value; 0 means none seen.

LLM aloneneeds extra softwareno speed-up
Task (O*NET 31.0)Could an LLM?Claude usage score
Check the forms that hold the concrete to see that they are properly constructed. no rater none seen
Set the forms that hold concrete to the desired pitch and depth, and align them. no rater none seen
Spread, level, and smooth concrete, using rake, shovel, hand or power trowel, hand or power screed, and float. no rater none seen
Monitor how the wind, heat, or cold affect the curing of the concrete throughout the entire process. no rater none seen
Mold expansion joints and edges, using edging tools, jointers, and straightedge. no rater none seen
Signal truck driver to position truck to facilitate pouring concrete, and move chute to direct concrete on forms. no rater none seen
Direct the casting of the concrete and supervise laborers who use shovels or special tools to spread it. no rater none seen
Produce rough concrete surface, using broom. no rater none seen
Apply hardening and sealing compounds to cure surface of concrete, and waterproof or restore surface. no rater none seen
Operate power vibrator to compact concrete. no rater none seen
Install anchor bolts, steel plates, door sills and other fixtures in freshly poured concrete or pattern or stamp the surface to provide a decorative finish. no rater none seen
Wet surface to prepare for bonding, fill holes and cracks with grout or slurry, and smooth, using trowel. no rater none seen
Waterproof or restore concrete surfaces, using appropriate compounds. no rater none seen
Mix cement, sand, and water to produce concrete, grout, or slurry, using hoe, trowel, tamper, scraper, or concrete-mixing machine. no rater none seen
Chip, scrape, and grind high spots, ridges, and rough projections to finish concrete, using pneumatic chisels, power grinders, or hand tools. no rater none seen
Cut out damaged areas, drill holes for reinforcing rods, and position reinforcing rods to repair concrete, using power saw and drill. no rater none seen
Wet concrete surface, and rub with stone to smooth surface and obtain specified finish. no rater none seen
Clean chipped area, using wire brush, and feel and observe surface to determine if it is rough or uneven. no rater none seen
Build wooden molds, and clamp molds around area to be repaired, using hand tools. no rater none seen
Sprinkle colored marble or stone chips, powdered steel, or coloring powder over surface to produce prescribed finish. (supplemental) no rater none seen
Fabricate concrete beams, columns, and panels. (supplemental) no rater none seen
Polish surface, using polishing or surfacing machine. (supplemental) no rater none seen
Cut metal division strips, and press them into terrazzo base so that top edges form desired design or pattern. (supplemental) no rater none seen
Push roller over surface to embed chips in surface. (supplemental) no rater none seen
Apply muriatic acid to clean surface, and rinse with water. (supplemental) no rater none seen
Spread roofing paper on surface of foundation, and spread concrete onto roofing paper with trowel to form terrazzo base. (supplemental) no rater none seen
How to read this. These are averages over task lists written for the US labour market, rated by people and by GPT-4 using early-2023 model capabilities, next to a count of what one company’s chatbot users actually ask for. A task being “exposed” says nothing about whether employers will cut jobs, shift work, or hire more of you. See how to read an exposure score.

Try it with your own task list

Sources: task list from O*NET® Database (U.S. Department of Labor, CC BY 4.0; modified by noworkleft.com); “could” labels from Eloundou et al., GPTs are GPTs (OpenAI/University of Pennsylvania, MIT licence, labels from early-2023 models); “seen in use” from the Anthropic Economic Index (Claude usage only, CC BY). Dates, versions and limits.

Other jobs in Construction and Extraction

Data built 2026-11-06. O*NET 31.0. Task match rates: 99.4% with the OpenAI/Penn labels, 99.2% with Anthropic usage.