noworkleft.com

Home › Jobs › Construction and Building Inspectors

Construction and Extraction · SOC 47-4011

Construction and Building Inspectors

Inspect structures using engineering skills to determine structural soundness and compliance with specifications, building codes, and other regulations. Inspections may be general in nature or may be limited to a specific area, such as electrical systems or plumbing.

Will AI replace this job?

The data cannot say, and anyone who gives you a percentage for “replaced” is guessing. What it does show is a gap between three things, for the 40 tasks O*NET lists for this occupation:

Could an LLM do it?

0%–8%

of tasks: an LLM alone could do the task or cut its time by half. Human raters say 8%, GPT-4 says 0%.

Counting tasks that need extra software around the model: 38%–70%.

Is it happening?

2 of 40 tasks

show measurable use in Claude conversations (Anthropic Economic Index). Anthropic’s occupation score, which counts only tasks that were also rated feasible, is 5%. Observed is a subset of “could” by construction.

Claude only, mostly US users, sampled periods in 2025. Not all AI use, and not employment.

What is left?

11 of 40 tasks

were rated “no LLM speed-up” by every rater (so, by Anthropic’s method, they cannot show up as observed use either). That is the part of the job these studies see no sign of AI touching.

It does not mean those tasks are safe. It means these methods found nothing there.

Task by task

Sorted with the tasks seen in use first. The three coloured squares are the three raters, in this order: human raters, GPT-4, GPT-4 with an alternative rubric. “Usage score” is Anthropic’s published task_penetration value; 0 means none seen.

LLM aloneneeds extra softwareno speed-up
Task (O*NET 31.0)Could an LLM?Claude usage score
Estimate cost of completed work or of needed renovations or upgrades. (supplemental) 2 of 3 raters 1.00
Review and interpret plans, blueprints, site layouts, specifications, or construction methods to ensure compliance to legal requirements and safety regulations. 1 of 3 raters 0.89
Maintain daily logs and supplement inspection records with photographs. all raters none seen
Identify and prioritize energy-saving measures. all raters none seen
Prepare audit reports containing energy analysis results or recommendations for energy cost savings. all raters none seen
Identify opportunities to improve the operation, maintenance, or energy efficiency of building or process systems. all raters none seen
Calculate potential for energy savings. all raters none seen
Analyze technical feasibility of energy-saving measures, using knowledge of engineering, energy production, energy use, construction, maintenance, system operation, or process systems. all raters none seen
Recommend energy-efficient technologies or alternate energy sources. all raters none seen
Collect and analyze field data related to energy usage. all raters none seen
Educate customers on energy efficiency or answer questions on topics such as the costs of running household appliances or the selection of energy-efficient appliances. all raters none seen
Prepare job specification sheets for home energy improvements, such as attic insulation, window retrofits, or heating system upgrades. all raters none seen
Analyze energy bills, including utility rates or tariffs, to gather historical energy usage data. all raters none seen
Quantify energy consumption to establish baselines for energy use or need. all raters none seen
Determine patterns of building use to show annual or monthly needs for heating, cooling, lighting, or other energy needs. all raters none seen
Compare existing energy consumption levels to normative data. all raters none seen
Verify income eligibility of participants in publicly financed weatherization programs. (supplemental) all raters none seen
Approve building plans that meet required specifications. 2 of 3 raters none seen
Identify any health or safety issues related to planned weatherization projects. 2 of 3 raters none seen
Evaluate project details to ensure adherence to environmental regulations. (supplemental) 2 of 3 raters none seen
Issue permits for construction, relocation, demolition, or occupancy. 1 of 3 raters none seen
Inspect and monitor construction sites to ensure adherence to safety standards, building codes, or specifications. 1 of 3 raters none seen
Measure dimensions and verify level, alignment, or elevation of structures or fixtures to ensure compliance to building plans and codes. 1 of 3 raters none seen
Inspect or evaluate building envelopes, mechanical systems, electrical systems, or process systems to determine the energy consumption of each system. 1 of 3 raters none seen
Examine commercial sites to determine the feasibility of installing equipment that allows building management systems to reduce electricity consumption during peak demand periods. 1 of 3 raters none seen
Inspect newly installed energy-efficient equipment to ensure that it was installed properly and is performing according to specifications. 1 of 3 raters none seen
Monitor construction activities to ensure that environmental regulations are not violated. (supplemental) 1 of 3 raters none seen
Inspect facilities or installations to determine their environmental impact. (supplemental) 1 of 3 raters none seen
Conduct environmental hazard inspections to identify or quantify problems, such as asbestos, poor air quality, water contamination, or other environmental hazards. (supplemental) 1 of 3 raters none seen
Inspect bridges, dams, highways, buildings, wiring, plumbing, electrical circuits, sewers, heating systems, or foundations during and after construction for structural quality, general safety, or conformance to specifications and codes. no rater none seen
Show the other 10 tasks
Monitor installation of plumbing, wiring, equipment, or appliances to ensure that installation is performed properly and is in compliance with applicable regulations. no rater none seen
Confer with owners, violators, or authorities to explain regulations or recommend remedial actions. no rater none seen
Conduct inspections, using survey instruments, metering devices, tape measures, or test equipment. no rater none seen
Train, direct, or supervise other construction inspectors. no rater none seen
Measure energy usage with devices such as data loggers, universal data recorders, light meters, sling psychrometers, psychrometric charts, flue gas analyzers, amp probes, watt meters, volt meters, thermometers, or utility meters. no rater none seen
Perform tests such as blower-door tests to locate air leaks. no rater none seen
Oversee installation of equipment such as water heater wraps, pipe insulation, weatherstripping, door sweeps, or low-flow showerheads to improve energy efficiency. no rater none seen
Examine lifting or conveying devices, such as elevators, escalators, moving sidewalks, hoists, inclined railways, ski lifts, or amusement rides to ensure safety and proper functioning. (supplemental) no rater none seen
Evaluate premises for cleanliness, such as proper garbage disposal or lack of vermin infestation. (supplemental) no rater none seen
Sample and test air to identify gasses, such as bromine, ozone, or sulfur dioxide, or particulates, such as mold, dust, or allergens. (supplemental) no rater none seen
How to read this. These are averages over task lists written for the US labour market, rated by people and by GPT-4 using early-2023 model capabilities, next to a count of what one company’s chatbot users actually ask for. A task being “exposed” says nothing about whether employers will cut jobs, shift work, or hire more of you. See how to read an exposure score.

Try it with your own task list

Sources: task list from O*NET® Database (U.S. Department of Labor, CC BY 4.0; modified by noworkleft.com); “could” labels from Eloundou et al., GPTs are GPTs (OpenAI/University of Pennsylvania, MIT licence, labels from early-2023 models); “seen in use” from the Anthropic Economic Index (Claude usage only, CC BY). Dates, versions and limits.

Other jobs in Construction and Extraction

Data built 2026-11-06. O*NET 31.0. Task match rates: 99.4% with the OpenAI/Penn labels, 99.2% with Anthropic usage.