Installation, Maintenance, and Repair · SOC 49-3011
Aircraft Mechanics and Service Technicians
Diagnose, adjust, repair, or overhaul aircraft engines and assemblies, such as hydraulic and pneumatic systems.
Will AI replace this job?
The data cannot say, and anyone who gives you a percentage for “replaced” is guessing. What it does show is a gap between three things, for the 38 tasks O*NET lists for this occupation:
Could an LLM do it?
3%–8%
of tasks: an LLM alone could do the task or cut its time by half. Human raters say 3%, GPT-4 says 8%.
Counting tasks that need extra software around the model: 11%–40%.
Is it happening?
0 of 38 tasks
show measurable use in Claude conversations (Anthropic Economic Index). Anthropic’s occupation score, which counts only tasks that were also rated feasible, is 0%. Observed is a subset of “could” by construction.
Claude only, mostly US users, sampled periods in 2025. Not all AI use, and not employment.
What is left?
18 of 38 tasks
were rated “no LLM speed-up” by every rater (so, by Anthropic’s method, they cannot show up as observed use either). That is the part of the job these studies see no sign of AI touching.
It does not mean those tasks are safe. It means these methods found nothing there.
Task by task
Sorted with the tasks seen in use first. The three coloured squares are the three raters, in this order: human raters, GPT-4, GPT-4 with an alternative rubric. “Usage score” is Anthropic’s published task_penetration value; 0 means none seen.
| Task (O*NET 31.0) | Could an LLM? | Claude usage score |
|---|---|---|
| Read and interpret pilots' descriptions of problems to diagnose causes. | all raters | none seen |
| Read and interpret maintenance manuals, service bulletins, and other specifications to determine the feasibility and method of repairing or replacing malfunctioning or damaged components. | 2 of 3 raters | none seen |
| Maintain repair logs, documenting all preventive and corrective aircraft maintenance. | 2 of 3 raters | none seen |
| Inspect airframes for wear or other defects. | 2 of 3 raters | none seen |
| Communicate with other workers to coordinate fitting and alignment of heavy parts, or to facilitate processing of repair parts. | 2 of 3 raters | none seen |
| Conduct routine and special inspections as required by regulations. | 1 of 3 raters | none seen |
| Replace or repair worn, defective, or damaged components, using hand tools, gauges, and testing equipment. | 1 of 3 raters | none seen |
| Check for corrosion, distortion, and invisible cracks in the fuselage, wings, and tail, using x-ray and magnetic inspection equipment. | 1 of 3 raters | none seen |
| Measure parts for wear, using precision instruments. | 1 of 3 raters | none seen |
| Test operation of engines and other systems, using test equipment, such as ignition analyzers, compression checkers, distributor timers, or ammeters. | 1 of 3 raters | none seen |
| Remove or cut out defective parts or drill holes to gain access to internal defects or damage, using drills and punches. | 1 of 3 raters | none seen |
| Inventory and requisition or order supplies, parts, materials, and equipment. | 1 of 3 raters | none seen |
| Clean engines, sediment bulk and screens, and carburetors, adjusting carburetor float levels. | 1 of 3 raters | none seen |
| Locate and mark dimensions and reference lines on defective or replacement parts, using templates, scribes, compasses, and steel rules. | 1 of 3 raters | none seen |
| Clean, strip, prime, and sand structural surfaces and materials to prepare them for bonding. | 1 of 3 raters | none seen |
| Determine repair limits for engine hot section parts. (supplemental) | 1 of 3 raters | none seen |
| Disassemble engines and inspect parts, such as turbine blades or cylinders, for corrosion, wear, warping, cracks, and leaks, using precision measuring instruments, x-rays, and magnetic inspection equipment. (supplemental) | 1 of 3 raters | none seen |
| Trim and shape replacement body sections to specified sizes and fits and secure sections in place, using adhesives, hand tools, and power tools. (supplemental) | 1 of 3 raters | none seen |
| Cure bonded structures, using portable or stationary curing equipment. (supplemental) | 1 of 3 raters | none seen |
| Prepare and paint aircraft surfaces. (supplemental) | 1 of 3 raters | none seen |
| Inspect completed work to certify that maintenance meets standards and that aircraft are ready for operation. | no rater | none seen |
| Examine and inspect aircraft components, including landing gear, hydraulic systems, and deicers to locate cracks, breaks, leaks, or other problems. | no rater | none seen |
| Remove or install aircraft engines, using hoists or forklift trucks. | no rater | none seen |
| Service and maintain aircraft and related apparatus by performing activities such as flushing crankcases, cleaning screens, and or moving parts. | no rater | none seen |
| Assemble and install electrical, plumbing, mechanical, hydraulic, and structural components and accessories, using hand or power tools. | no rater | none seen |
| Reassemble engines following repair or inspection and reinstall engines in aircraft. | no rater | none seen |
| Maintain, repair, and rebuild aircraft structures, functional components, and parts, such as wings and fuselage, rigging, hydraulic units, oxygen systems, fuel systems, electrical systems, gaskets, or seals. | no rater | none seen |
| Measure the tension of control cables. | no rater | none seen |
| Obtain fuel and oil samples and check them for contamination. | no rater | none seen |
| Examine engines through specially designed openings while working from ladders or scaffolds, or use hoists or lifts to remove the entire engine from an aircraft. | no rater | none seen |
Show the other 8 tasks
| Listen to operating engines to detect and diagnose malfunctions, such as sticking or burned valves. | no rater | none seen |
| Clean, refuel, and change oil in line service aircraft. | no rater | none seen |
| Modify aircraft structures, space vehicles, systems, or components, following drawings, schematics, charts, engineering orders, and technical publications. | no rater | none seen |
| Install and align repaired or replacement parts for subsequent riveting or welding, using clamps and wrenches. | no rater | none seen |
| Accompany aircraft on flights to make in-flight adjustments and corrections. | no rater | none seen |
| Spread plastic film over areas to be repaired to prevent damage to surrounding areas. | no rater | none seen |
| Fabricate defective sections or parts, using metal fabricating machines, saws, brakes, shears, and grinders. | no rater | none seen |
| Remove, inspect, repair, and install in-flight refueling stores and external fuel tanks. (supplemental) | no rater | none seen |
Try it with your own task list
Sources: task list from O*NET® Database (U.S. Department of Labor, CC BY 4.0; modified by noworkleft.com); “could” labels from Eloundou et al., GPTs are GPTs (OpenAI/University of Pennsylvania, MIT licence, labels from early-2023 models); “seen in use” from the Anthropic Economic Index (Claude usage only, CC BY). Dates, versions and limits.
Other jobs in Installation, Maintenance, and Repair
- Computer, Automated Teller, and Office Machine Repairers (11% observed)
- First-Line Supervisors of Mechanics, Installers, and Repairers (10% observed)
- Camera and Photographic Equipment Repairers (4% observed)
- Telecommunications Equipment Installers and Repairers, Except Line Installers (3% observed)
- Security and Fire Alarm Systems Installers (3% observed)
- Industrial Machinery Mechanics (2% observed)
- Heating, Air Conditioning, and Refrigeration Mechanics and Installers (2% observed)
- Radio, Cellular, and Tower Equipment Installers and Repairers (0% observed)
Data built 2026-11-06. O*NET 31.0. Task match rates: 99.4% with the OpenAI/Penn labels, 99.2% with Anthropic usage.